HDTV/SDTV Network Video Decoder

The Ikegami line of IDE-200HD are HDTV/SDTV Network Video Decoders and utilize H.264 Video Compression and Analog and Embedded Audio Compression.

The IDE 200HD accepts HD-SDI or SD-SDI Video which is 1080i(50/59.94), 720p(50/59.94), 480i(59.94) or 575i(50).

→ H/264 Video Compression.
→ AAC-LC 64Kbps Audio Compression.
→ AC24V/DC12V/PoE Power Requirements

Description	Decoder
Video Input	Compressed Video (Video set by IP Camera or IEN-200HD)
Video Output	HDSDI (SMPTE 292M) 0.8 Vp-p, 1080i (50/59.94Hz), 720p (50/59.94Hz); SDSDI (SMPTE 259M) 0.8Vp-p, 480i (59.94Hz), 575i (50Hz); Auto-Selection
Video Compression	H.264
Video Settings	Video set by IP Camera or IEN-200HD
Analog I/O	Stereo both ways = Line Input - 10dBV 10kohm; Line Output - 10dBV 600pohm
Digital Input	Embedded Audio 2ch = SMPTE 299M, 272M
Audio Compression	AAC-LC 64Kbps
Protocol	TCP, UDP, RTP/RTCP, RTSP,HTTP, FTP, DHCP, DNS, NTP
Monitoring	Ikegami Viewing Software
Network	Ethernet 10Base-T/100Base-T
Serial Control	RS-232C or RS-485
I/O Terminal	Input = Non-Voltage Contact, Output = Open Collector Max24V, 50mA
Power Requirements	AC24V /-10% 50/60Hz, DC12V (10.5V ~ 15V), PoE (IEEE802.3af)
Power Consumption	Approx 5W
Operating Temperature	-10 to 50 Degree C
Operating Humidity	Within 30 to 85% RH
External Dimensions	132(W) x 44(H) x 179(D) mm
Weight	Approx 880g
LAN	RJ-45 (Auto MDI/MDIX)
VBS IN/OUT	BNC
Audio IN/OUT	RCA L/R each 1
AC24V/DC12V	2P Push In Terminal
DC12V	Jack for AC Adaptor
I/O Terminal	4P Push In Terminal
RS-232C	9P D-SUB (Male)
RS-485	3P Push In Terminal
SD Card Memory Slot	Full Size
Standard Accessories	Operation Manual, Feet, AC Adaptor