Digital Readouts

The Boeckeler Microcode II® digital readout is a state-of-the-art microprocessor that is available in one, two, and three axis versions. With a variety of additional options, the Microcode II can be tailored to your application. A Boeckeler® digital readout can be used to display measurement or positioning information from the following devices: digital positioner and micrometer heads, digital dial indicators, digital linear gages, digital filar eyepieces (requires readout with scaler) and linear measuring systems.

→ Inch or metric readings selectable at any time.
→ A relative or absolute zero switch which allows a temporary zero without losing an absolute zero reference.
→ A zero reset.
→ The direction of the count (plus/minus) sign can be reversed.
→ Optional RS-232 output to computer or printer.
→ An RS-232 averaging option.
→ A scaler option which permits the use of a scale factor (required with digital filar systems).
→ Min/Max/Diff option for measuring "out of roundness."
→ Offset option for adding the dimensions of gage rods and blocks.
→ Optional output to Mitutoyo(TM) SPC products.
→ Dual voltage option for 115/220 volt power supply.
→ Tilting base option.
→ CE Mark.

Inputs	Encoders with TTL quadrature square wave output as standard.
Error Messages	Power failure and overflow.
Display	Full six decades of seven segment LED's readable to 20' at 120 degrees.
Resolution	To .000 1 mm or .000 010 in. Optional resolution to .000 005 in.
Approx. Dimensions	Up to 7.5" (H) x 10" (D) x 5" (W).
Approx. Weight	Up to 6 lbs.
Warranty	1 year parts and labor