Search

(discontinued) Isolated Video Balun

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

This item is DISCONTINUED.

 

The Vigitron Coax Video Isolation Transformer Vi 1062 is a passive transceiver that includes a built-in video isolation transformer and transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 feet (228 m). Distances up to 3,500 feet (1,066m) can be achieved when it is used with Vigitron active UTP receivers. It uses category 2-7 twisted pair wires, is easy to install, cost effective and does not require power.

The annoying and potentially damaging hum bars on the screen are caused by ground voltage potential differences between your video equipment that is called ground loop. The Vi1062 provides complete isolation between devices and eliminates video hum bars, ground loops, and DC offsets which can degrade picture quality and potentially damage video equipment.

The Vi-1062 its wide bandwidth and low insertion loss makes it an ideal solution for eliminating ground loop problems for a wide variety of applications. The Vi1062 has built-in surge suppression to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals. The Vi1062 offers quality video in a compact size.

→ Quality video over 750 feet (228 m) of unshielded twisted pair wires
→ 3,500 feet (1,066 m) with Vigitron active receivers
→ NTSC, PAL and SECAM video formats
→ Support for "up-the-coax" type signals
→ No power required
→ Built-in differential surge protection
→ 60 dB crosstalk and noise immunity
→ 500 VDC isolation voltage
→ Compact size and easy installation
→ Compatible with all qualified UTP cameras
→ Limited lifetime warranty
→ Security and surveillance applications
→ School campuses applications
→ Casino security applications
→ Hospitals and airports applications

Video Format NTSC, PAL, SECAM
Frequency 20 Hz to 5.5 MHz
Input Impedance 75 Ohm
Output Impedance 100 Ohm
Max. Output Level 4 Vpp/75O
Insertion Loss 0.8 dB
Power No power required
Connectors Camera side male BNC
UTP side screwless terminal block
Isolation Voltage 500 VDC
Insulation Resistance 100 Mega Ohms
Humidity 0 to 95%, non-condensing
Temperature Operating -10?C to 50?C
Storage -30?C to 70?C
Dimensions 1.3x0.9x2.5 inches (33x23x64 mm)
Weight 5.6 oz (162 g)
Material ABS

 

vi1062.pdfspec sheet


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.