Single Port MaxiiCopper Ethernet Extender Over UTP

The Vigitron Ethernet Extender over UTP Vi-2301 is a revolutionary data transmission device that extends full-duplex High-Speed Ethernet over existing UTP infrastructures. It extends 10BaseT signals up to 5,000 feet (1,524 m) and 100BaseT up to 2,100 feet (640 m). It employs MaxiiCopper innovative and unique Ethernet extension technology that is designed to take full advantage of high-bandwidth networking cables and maintain a full-duplex 10 or 100 Mb/s Ethernet connection up to the maximum range - with minimum transmission error and latency.

Multiple remote network devices such as Mega-pixel IP cameras or VoIP can be connected to a central LAN switching fabric with ease. Its dual-rate capability provides an easy way to balance the best possible network throughput and long-reach distance design. The MaxiiCopper is a transceiver device and it needs to be deployed on both ends of the UTP cable as master and slave devices respectfully via a simple dip switch.A second dip switch sets the data rate between the remote and central locations. Vi2301 can use either one or four pairs of UTP set by the third dip switch.

The MaxiiCopper Vi 2301 is equipped with LEDs to provide link status and configured data rate. No other IP setting or configurations are required and it is completely transparent to the corporate IP network and higher layer protocols. The MaxiiCopper is the smallest size of its kind in the market and can be easily fit inside most camera housings. Its low power requirement supports a wide range of power supplies, or can shares the IP camera power source. Vigitron offers multi-port, rack or wall mountable models for larger projects.

→ RFC 768 UDP, 2068 HTTP, 793 TCP; 791 IP, 1783 TFTP, 894 IP over Ethernet
→ Extends Ethernet beyond 328 feet (100 m) limitation up to 3,000 feet (914 m) over UTP cables
→ Saves additional networking equipment costs and reduces installation time
→ Extended Pass Through PoE (EPTP™) compatible with 802.3af and 802.3at Power over Ethernet (PoE)
→ MegaPixel Certified (MPC™) High data rate, ideal for high bandwidth requirements of Mega-pixel cameras, multiple IP cameras systems and cameras requiring Jumbo Frame transmission
→ Symmetric Bandwidth (SBW™) provides consistent upload and download with Virtual Zero Packet Loss (VZPL)
→ Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards
→ Supports one pair or four-pair UTP wires with built-in transceiver cable connectivity tester
→ Type tested for -40°C to 75°C temperature range under NEMA-TS2 testing standards
→ Data rate selectable to for maximum bandwidth utilization
→ Complies to major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPS
→ USA designed and manufactured
→ Life Time Warranty
→ Extends Ethernet beyond 328 feet (100 m) limitation up to 3,000 feet (914 m) over UTP cables
→ Saves additional networking equipment costs and reduces installation time
→ Extended Pass Through PoE (EPTP™) compatible with 802.3af and 802.3at Power over Ethernet (PoE)
→ MegaPixel Certified (MPC™) High data rate, ideal for high bandwidth requirements of Mega-pixel cameras, multiple IP cameras systems and cameras requiring Jumbo Frame transmission
→ Symmetric Bandwidth (SBW™) provides consistent upload and download with Virtual Zero Packet Loss (VZPL)
→ Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards
→ Supports one pair or four-pair UTP wires with built-in transceiver cable connectivity tester

Ethernet Interface	Standard 10/100BaseT
Ethernet Rate	Dip switch selectable 10/100 Mb/s; Full speed at maximum rated distance
UTP	100 Ohm /- 20%, 3,000 feet (914 m) at 10BaseT; 2,100 feet (640 m) at 100BaseT
Power Supply	12 VDC, 24 VAC, POE af/at @150 mA maximum
Status LEDs	Power
Standard Ethernet	Traffic, Link
Extended Ethernet	Traffic, 10/100BaseT
Connectors	Ethernet Interface: RJ-45 Connector; Extended Interface: RJ-45 Connector
Power	IEC380-8 inlet
RFC	2544 TCP/IP Packet Transmission
Compatible with	IEEE 802.3af PoE, IEEE 802.3at PoE
POE Compatibility	802.3af Class 0,1,2,3; 802.3af Class 4
Jumbo Frame Support	Yes
FCC	Part 15, Subpart B, Class B 2010
Emissions	EN 5502:2006 A1:2007; EN 61000-3-2:2006 A1:2009 A2:2009; EN 61000-3-3:2008; EN 55024:1998 A1:2001 A2:2003; RoHS; CE
Humidity	0 to 95%, non-condensing
Temperature Operating	-40°C to 75°C per NEMA-TS2 testing; Storage: -40°C to 85°C
Dimensions	1.15x1.6x3.73 in., 3.0x4.0x9.5 cm (HxWxL)
Weight	0.212 lb, 96 g
Material	Extruded Aluminum
Accessories	12 VDC wall-mount power supply (optional)