Search

(discontinued) Voice Communication Microphones

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

This product has been discontinued. For an alternative, please contact [email protected]

The Shure Specialty to General Communications Microphone Series 515-Series are low-impedance dynamic microphones designed to be mounted on flexible goosenecks or fixed pips. Optimized frequency response and a unidirectional (cardioid) pickup pattern makes them ideal for language labs, paging applications, and base station communications. The 515 Series are also recommended for use as talkback or cuing microphones in TV, film, and recording studios. Because of their low impedance, these microphones retain their level and response characteristics even when long lengths of cable are used.

All three models are supplied with a push-to-talk button and a four-conductor cable (two conductors shielded).

→ Frequency response optimized for announcing, narration, and paging applications
→ Cardioid pickup pattern symmetrical about axis
→ Neodymium magnet for high signal-to-noise ratio
→ Shock-mounted cartridge for quiet operation and low stand/handling noise
→ Tough diecast locking grille and handle
→ Built-in push-to-talk button controls microphone circuit and relay or control circuit
→ 45.7 cm (18 in.) gooseneck and mounting flange supplied (515SBG-18X and 515SBG-18XF only)

Type Dynamic (moving coil)
Frequency Response 80 to 15,000 Hz
Polar Pattern Cardioid (unidirectional). Effective rejection of sound at rear of microphone is uniform at all frequencies, while front pickup characteristics are uniform about axis
Impedance 150 O rated (180 O actual)
Output Level (at 1,000 Hz) Open Circuit Voltage: -57 dBV/Pa* (1.4 mV); *1 PA = 94 DB SPL
Phasing Positive pressure on diaphragm produces positive voltage on; RED cable relative to BLACK cable lead
Switch Built-in, leaf-type, non-locking, push-to-talk
Shock Mount Internal rubber vibration isolator
Cable Highly durable cable with effective hum shielding, four conductors (two shielded), plastic jacketed; Model 515SBGX= 1.8 m (70 in.); Models 515SBG-18X and 515SBG-18XF= 1.3 m (51 in.) from gooseneck
Case Silver finish die casting with black enamel diecast grille and stainless steel screen
Certification Conforms to European Union directives, eligible to bear CE marking; meets European Union EMC Immunity Requirements (EN 55103)
MODEL 515SBGX Does not include gooseneck or mounting flange
MODEL 515SBG-18X Includes gooseneck and 76.2 mm (3 in.) diameter mounting flange
MODEL 515SBG-18XF Includes gooseneck and 44.4 mm (1-3/4 in.) diameter mounting flange
Net Weight 515SBGX= 380 g (13.5 oz); 515SBG-18X= 900 g (31.8 oz); 515SBG-18XF= 787 g (27.8 oz)

 



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.