Call Now: 1-800-284-2288 |
XGA (1024x768), 1/3", B/W, 44fps, full triggering, variable partial scan, Camera Link Output |
|
|
The STC-CL83A-44 is a full featured, cost effective, XGA, progressive scan, digital Camera Link ® cube camera with a 1/3" monochrome CCD. It features a full frame, 44fps, XGA output, partial scanning, triggering, and reset capabilities.
STC-CL83A-44 features include:
→ 1/3" CCD Image Sensor
→ XGA, Progressive Scan, 44fps
→ Compact Housing with Precise Optical Design
Imager | 1/3 interline XGA monochrome progressive CCD: ICX204AL |
Total Picture Element | 1077 (H) x 788 (V) |
Active Picture Element | 1024 (H) x 768 (V) |
Chip Size | 5.8 (H) x 4.92 (V) mm |
Cell Size | 4.65 (H) x 4.65 (V) µm |
Scanning System | Progressive |
Scanning Method | Full, Partial full, 1/2 partial, 1/4 partial, Variable partial, Binning (Partial, 1/2 partial, 1/4 partial, Variable partial) |
Vertical Frequency (Frame Rate) | 43.77 Hz |
Horizontal Frequency | 34.84 kHz |
Pixel Frequency | 44.25 MHz |
S/N Ratio - @ 8bit output | ≤ 3 Digit (Gain 0 dB) |
S/N Ratio - @ 10bit output | ≤ 10 Digit (Gain 0 dB) |
Minimum Scene Illumination | 0.25 Lux at F1.2 |
Sync System | Internal / External |
Video Output | Digital 8 or 10 bit CameraLink® (Base Configuration) |
Tap | 1 Tap |
Shutter Speed | OFF, 1/5 to 1/96,000 seconds (Variable at every H and clock) |
Gain | 0 ~ 27 dB |
Gamma | 1.0 |
Power Supply - Input Voltage | 12 Vdc ± 10% |
Power Supply - Consumption | < 1.8 W |
Trigger Mode | Edge preset trigger (V-reset, Non-reset), Pulse width trigger (V-reset, Non-reset) |
Communication | RS232 via Camera Link connector |
Dimensions | 28 (W) x 28 (H) x 29.5 (D) mm (Not including lens mount and the connector) |
Optical Filter | No IR cut filter |
Optical Center Accuracy | Positional accuracy in H and V directions: /0.31 mm Rotational accuracy of Hand V: /2.1 deg. |
Material - Case | Front, base, and rear: Aluminum die cast (ADC12) Cover: Steel sheet covered with zinc |
Material - Tripod | Polycarbonate ABS |
Lens Mount | C mount |
Interface Connector | HR10A-7R-6PB (Hirose) or equivalent |
Tripod | Tripod can be attached to 4 plates (4 screws on the bottom plate, 3 screws on the other 3 plates) |
Weight | Approximately 52g (Camera: 43g, tripod: 9g) |
Temperature and Humidity - Operating | Temperature: -5 to 50 deg. C; Relative Humidity: 0 to 85% (No condensation) |
Temperature and Humidity - Storage | Temperature: -30 to 65 deg. C; Relative Humidity: 0 to 90% (No condensation) |
Vibration | 20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each |
Shock | Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each |
Standard Compliancy | EMS: EN61000-6-2, EMI: EN55011 (Class B) |
RoHS | RoHS compliant |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|