Search

8.2-Inch Broadcast Studio Monitor

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The JVC DT-V9L5U 8.2" Broadcast Studio Monitor features a 16:10 widescreen, active matrix, TFT LCD with a gloss surface and an LED backlight. The resolution is 1280 x 800, contrast ratio 800:1, and brightness 360 nit. The viewing angle is 160°. The monitor powers by an included AC adapter.

 

Available Accessories Include:

RAK92LCD2 Side-by-Side Rack Mount Kit for DT-V9L5U

DT-V9L5U features include:

  • 8.2" IPS panel with 1280 x 800 resolution
  • Mercury-free white LED backlight
  • 800:1 contrast ratio
  • 360 nit brightness
  • 160 x 160° viewing angle
  • 16 channel SDI audio level metering
  • Area/Center/Aspect marker
  • SDI timecode display
  • Front and rear tally lamps
  • 1W internal mono speaker
  • AC adapter included
  • Tabletop stand included
  • Supports Anton Bauer battery plates on the rear
  • Two 3G/HD/SD-SDI inputs and one switched out output
  • Bridge-connected Composite BNC input and output
  • HDMI input
  • Component input on 3x BNCs
  • RCA audio input on one connector
  • RCA L/R audio output
  • Front panel headphone jack
  • RJ-45 Make/Trigger
  • D-Sub9 RS-232C
  • Waveform
  • Vectorscope
  • Underscan / Overscan
Screen 8.2" wide, active matrix TFT LCD (21 cm)
LED backlight
Effective Screen Size W x H x D: 7 x 4.3 x 4.2 (18 x 11 x 21 cm)
Resolution 1280 x 800
Colors 16.7 million
Viewing Angle 80° H, 80° V
Brightness 360 nit
Contrast Ratio 800:1
Aspect Ratio 16:10
Input & Output 3G/HD/SD-SDI input (embedded audio supported)
2x auto detecting BNC connectors

HD-SDI output switched out (embedded audio supported)
1x auto detecting BNC connector

HDMI input:
1x HDMI, HDCP-compatible

Composite input/output:
1x line on 2x BNC connectors, 1 V (p-p), 75 Ω
The input and output terminals are bridge-connected (auto termination)

Component input:
1x line on 3x BNC connectors
Y: 1 V(p-p), 75 Ω(with sync)
PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 Ω

RCA audio input:
1x RCA connector, 500 mV (rms), high impedance

RCA audio output:
2x RCA connectors, 500 mV (rms)
500 mV (rms)

1x headphone jack

Remote (Make/Trigger):
1x RJ-45, contact or momentary pulse to corresponding terminal

Remote (RS-232C):
D-Sub9, serial communication
Format HD-SDI: SMPTE292M
SD-SDI: ITU-R BT.656, SMPTE259M
Embedded Audio 16 Ch: SMPTE299M, SMPTE272M
Timecode SDI timecode
Audio Output Internal speaker: 1 W
Audio Metering Digital (up to 16 ch)
Power Requirements AC 120 V / AC 220 - 240 V, 50/60 Hz or DC 12 - 17 V
Power input: 4-pin XLR
AC adapter included
Rated Current 0.5 A (AC 120 V)
0.25 A (AC 220 - 240 V)
1.3 A (DC 12 - 17 V)
Operating Temperature 41 to 95°F (5 to 35°C)
Operating Humidity 20 - 80% (non-condensing)
*Slightly variable depending on ambient conditions for installation
Dimensions With stand: 8.6 x 8.6 x 7.5" (22 x 22 x 19 cm)
Without stand: 8.6 x 7 x 4.7" (22 x 18 x 12 cm)
Weight With stand: 7 lb (3.2 kg)
Without stand: 5.1 lb (2.3 kg)


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.