Call Now: 1-800-284-2288 |
(discontinued) 1/2" EIA Monochrome Interlaced Area Scan Camera |
|
This product has been discontinued. For an alternative solution, please contact sales.
The JAI CV-A50E has the compact footprint of merely 44 x 66 mm (width x length) with a height of 29 mm. The CV-A50E offers S/N ratio >59dB, excellent sensitivity and smear performance. RS 232C control of all settings. Sevaral trigger modes including edge pre-select and pulse width control. The target market for this camera family is volume OEMs (Original Equipment Manufacturers) and high level System Integrators for Automated Imaging applications (e.g. industrial/medical equipment).
→ 1/2" monochrome interlaced scan
→ EIA (RS-170) video standard
→ 30 frames/sec.
→ S/N ratio >59 dB
→ Programmable exposure
→ Interlaced or non-interlaced scanning
→ Frame-delay readout
→ RS 232C interface
Scanning system | CCIR: 625 lines 25 frames/sec EIA: 525 lines 30/frames sec |
CCD sensor | Monochrome 1/2" IT CCD |
Sensing area | 6.4 (h) x 4.8 (v) mm |
Effective pixels | CCIR: 752 (h) x 582 (v) EIA: 768 (h) x 494 (v) |
Pixels in video output | CCIR: 737 (h) x 575 (v) EIA: 758 (h) x 486 (v) |
Cell size | CCIR: 8.6 (h) x 8.3 (v) µm EIA: 8.4 (h) x 9.8 (v) µm |
Sensitivity on sensor | 0.03 Lux, Max gain, 50% video |
S/N ratio | CCIR: 59 dB EIA: 60 dB |
Video output | Composite VS signal, 1.0 Vpp, 75 Ω |
Gamma | 0.45 or 1.0 |
Gain | Manual - Automatic |
Gain range | 0 to 15 dB |
Accumulation | Field-Frame |
Synchronization | Int. X-tal. Ext HD/VD or random trigger |
Scanning | 2:1 interlaced, non-interlaced |
HD sync. input/output | 4 V, 75 Ω |
Trigger input | 4 V, 75 Ω |
WEN output (write enable) | 4 V, 75 Ω |
EEN out. (exposure enable) | 4 V, 75 Ω |
Pixel clock output | 4 V, 75 Ω |
Shutter | (off), 1/100, 1/250, 1/500, 1/1,000, 1/2000, 1/4000, 1/10,000 sec. |
Pulse width control | 1.5 H to 1000 H |
Start/stop | CCIR: 1/50 to 1/10,000 sec. EIA: 1/60 to 1/10,000 sec. |
Long time exposure | 1 field to ∞ |
Programmable exposure | 2.5 H to 252.5 H |
Frame delay readout | Time from PWC trigger input to ext. VD input |
Functions controlled by RS-232C | Scanning format, Trigger mode,Shutter speed, Trigger/WEN polarity, Accumulation, Shutter mode, Programmable exposure, AGC level, White clip, Setup, Manual gain, AGC/manual gain, Internal/potentiometergain set, Gamma, Pixel clock, Commands and internal adjustments |
Functions controlled by DIP switches | VD input/output, HD input/output, internal HD and VD 75 Ω termination on/off |
Operating temperature | -5°C to 45°C |
Humidity | 20 - 80% non-condensing |
Storage temp./humidity | -25°C to 60°C/20% - 90% |
Power | 12V DC ±10% 1.5 W |
Lens mount | C-mount |
Dimensions | 29 x 44 x 66 mm (HxWxD) |
Weight | 150 g |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|