Color Version PoCL Camera

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The JAI SP-20000M-PMCL and SP-20000C-PMCL are 20-megapixel CMOS cameras providing an exceptional combination of resolution, speed, and image quality.

Built around the CMOSIS CMV20000 imager, these Spark Series cameras offer full frame resolution of 5120 x 3840 pixels at a remarkable 30 frames per second. This combination of speed and resolution makes them ideal for examining flat panel displays, printed circuit boards, and many other applications where detailed inspections are required across a wide area.

In addition, the Spark SP-20000C-PMCL cameras are well-suited to persistent surveillance, border security, aerial mapping, and other outdoor applications, thanks to such features as automatic level control (ALC) linking shutter and gain for best exposures under changing light conditions; and a high dynamic range mode.

The monochrome model (SP-20000M-PMCL) offers horizontal and vertical binning plus excellent NIR response while the color model (SP-20000C-PMCL) provides raw Bayer output at 30 fps. A built-in high dynamic range (HDR) mode (monochrome only) lets users define 2 knee points to expand the dynamic range of the camera in high contrast situations.

Both monochrome and color models leverage CMOSIS' 8-transistor (8T) pixel architecture to implement true correlated double sampling (CDS) for outstanding image quality with the highest degree of pixel uniformity. An industry-leading 1:50000 parasitic light rejection ratio minimizes global shutter leakage for clean images with sharp contrast.

Dual Mini Camera Link connectors in a two-cable "full" configuration provide the bandwidth necessary for high-speed, high resolution ouput. Power can be supplied through the Camera Link connectors using a dual-channel-powered frame grabber, or can be provided via the separate 12-pin connector.

Uses F-mount lenses.

→ Spark Series
→ Large 41mm diagonal CMOS imager with global shutter
→ 30 fps at full 20-megapixel resolution (5120 x 3840)
→ 6.4 µm square pixels provide excellent sensitivity
→ Imager includes correlated double sampling (CDS) function for improved uniformity
→ In-camera CMOS pattern correction
→ Flat-field and pixel blemish correction
→ 8/10/12-bit Mini Camera Link output
→ Accepts power over Mini Camera Link or via 12-pin connector
→ F-mount lens mount
→ Automatic Level Control (ALC) for dynamic lighting conditions

Sensor 41 mm diag. CMOS global shutter (CMV20000)
Pixel Clock 39.16 MHz
Frame rate, full frame 30 frames/sec.
Active area 32.77 mm (h) x 24.58 mm (v), 41 mm diagonal
Cell size 6.4 µm (h) x 6.4 µm (v)
Active pixels 5120 (h) x 3840 (v)
Horizontal output frequency 11.37 kHz to 122.2 kHz depending on tap geometry and CL clock frequency
Read-out modes Full: 5120 (h) x 3840 (v) @ 30 fps
ROI: Any start position. 8-5120 pixels wide
2-3840 lines high
Width in 8 pixels/step
Height in 1 line/step (mono) or 2 lines/step (color)
Binning (mono): 1x2, 2x1, 2x2 (frame rate does not change)
EMVA 1288 Parameters 10-bit output format
Absolute sensitivity (mono) 16.05 p (λ = 525 nm)
Absolute sensitivity (color) TBD p (λ = 525 nm)
Maximum SNR (mono) 40.24 dB
Maximum SNR (color) TBD dB
Traditional SNR mono: >53 dB (0 dB gain)
color: >51 dB(0 dB gain, green)
Video signal output mono: 8/10/12-bit monochrome
color: 8/10/12-bit Bayer
Auto-iris lens video output 0.7Vp-p, with 0.3V horiz. sync
Gain Manual/automatic 0 dB to 24 dB
White balance (SP-20000C) Manual, one-push auto, or continuous (3000K to 9000K)
Gamma 0.45-1.0 (8 steps) or 256-point LUT
Synchronization Internal
Trigger input TTL, CL, Pulse Generators (4), Software, NANDØ, NAND1
Trigger modes EPS, PIV, Trigger Width, RCT (with ALC)
Electronic shutter Timed exposure: 10 µs to 8 sec in 1 µs steps
Auto shutter: 1/30 to 1/100000 sec.
Auto level control (ALC) Shutter range from 1/30 to 1/100000, gain range from 0 dB to 24 dB, auto iris control
Tracking speeds and max values adjustable
Pre-processing functions Flat field correction, color shading correction (SP-20000C), blemish compensation (1000 pixels)
Operating temperature -45° C to 70° C
Storage temperature -45° C to 70° C
Humidity 20 - 80% non-condensing
Vibration 10G (20 Hz to 200 Hz XYZ)
Shock 80 G
Regulations CE (EN 61000-6-2, EN 61000-6-3), FCC part 15 class B, RoHS/WEEE
Power 12V to 24V DC ± 10%. 5.4W typical (full frame @ 12V)
Lens mount F-mount
Dimensions (H x W x L) 62 mm x 62 mm x 84.5 mm
Weight F-mount - 320 g


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.