4-Port Managed PoE/PoE+ Switch with Midspan Injector Kit

The Altronix NetWay4ESK is a kit that includes NetWay4ES and NetWay1E. NetWay4ES is a 4-Port Managed PoE/PoE+ switch which is designed for installation at the IDF (Intermediate Distribution Frame). NetWay4ES allows for system expansion by accommodating up to four (4) IP cameras/devices over a single CAT-5 or higher structured cable. Power up to 84W is provided by NetWay1E midspan injector or 30W by NetWay8/NetWay16 midspan or any IEEE 802.3at standard midspan/ endspan typically located at the MDF (Main Distribution Frame). Built-in IP management facilitates remote device reset/control and status monitoring.

NETWAY4ESK features include:

• NetWay1E: 115VAC, 60Hz, 1.5 amp.
• NetWay4ES: powered by Netway1E.t:
• Maximum power per port: PoE+ (30W)
• Total maximum power: 84W.
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair Cat-5 or better structured cable.
• Distance: up to 100m.
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
• NetWay1E:
• - AC Power.
• - Yellow - IP Link status, Green - 10/100Base-T/active.
• NetWay4ES:
• - Yellow - IP Link status, Green - 10/100Base-T/active.
• Operating Temperature:
• 14° F to 122° F (-10° C to +50° C).
• Storage Temperature:
• -4° F to 158° F (-20° C to +70° C).
• Humidity: 20 to 85%, non-condensing
• Auto detection and protection of legacy non-PoE cameras/devices.
• Manual PoE shutdown (Spring terminals).
• IEC 320 - 3-wire grounded line cord (detachable).