Call Now: 1-800-284-2288 |
(discontinued)Compact Control System with Ethernet |
|
|
This product has been discontinued. For an alternative, please contact [email protected].
The Crestron MC2E is a low-cost 2-Series Ethernet control system ideally suited for any application requiring the powerful control engine and Ethernet connectivity of larger Crestron control systems, but with fewer control ports. The MC2E features two built-in COM ports, four IR/Serial ports, four I/O Versiports, four isolated relays, and Ethernet for control of video projectors, plasma displays, switchers, DVD players, screens, lifts, and much more. Additional control ports may be added using Cresnet expansion modules, or by "slaving" additional control processors.
MC2E features include:
Memory | ||
SDRAM | 32 MB | |
NVRAM | 256 KB | |
Flash | 4 MB | |
Operating System | ||
Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL Windows™ and SIMPL+® | ||
Ethernet | ||
10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications | ||
Connectors | ||
COM A - B | (2) DB9 male, bidirectional RS-232/422/485 ports; Up to 115.2k baud; Hardware and software handshaking support; All ports support C2N-NPA8 Network Poll Accelerator |
|
INFRARED-SERIAL OUTPUT A - D | (4) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; Individual signal generator per port, allowing simultaneous firing of all ports |
|
I/O Versiports 1 - 4 | (1) 5-pin 3.5mm detachable terminal block comprising (4) digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC; Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms; Programmable 5 Volts, 2k ohms pull-up resistor per pin |
|
RELAY OUTPUT 1 - 4 | (1) 8-pin 3.5mm detachable terminal block comprising (4) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
|
IR IN | (1) 3-pin 3.5mm detachable terminal block; For connection of the CNXRMIRD IR Receiver (sold separately); Allows IR wireless control from Crestron or third-party remotes using RC-5 IR commands |
|
LAN | (1) 8-wire RJ45 with 2 LED indicators; 10/100BaseT Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity |
|
COMPUTER | (1) DB9 female, RS-232 computer console port | |
NET | (1) 4-pin 3.5mm detachable terminal block; Cresnet port, Master/Slave selectable; Expandable via C2N-NPA8 Network Poll Accelerator |
|
24VDC | (1) 2.1mm barrel DC power jack, 24 Volt DC power input; (PW-2420RU power pack included); Passes through to NET port to power Cresnet devices |
|
Reset Buttons | ||
HW-R | Hardware reset (reboots the control system) | |
SW-R | Software reset (restarts the SIMPL program) | |
LED Indicators | ||
PWR | (1 green) Indicates DC power supplied to unit | |
NET | (1 yellow) Indicates Cresnet bus activity | |
MSG | (1 red) Indicates control system has generated an error message | |
LNK | (1 red) Indicates a valid connection on LAN port | |
ACT | (1 red) Indicates activity on LAN port | |
Power Requirements | ||
Power Pack | 2.0 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included |
|
Available Cresnet Power | 38 Watts using PW-2420RU power pack (included) | |
Cresnet Power Usage | 12 Watts (0.5 Amp @ 24 Volts DC) using Cresnet network power (no power pack connected to the 24VDC connector) | |
Environmental | ||
Temperature | 41° to 113°F (5° to 45°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Enclosure | ||
Chassis | Metal, black matte finish | |
Faceplate | Extruded aluminum, black matte finish with polycarbonate label overlay | |
Mounting | Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included) | |
Dimensions | ||
Height | 1.80 in (46 mm); 1.70 in (44 mm) without feet |
|
Width | 17.03 in (433 mm); 19.0 in (483 mm) with ears |
|
Depth | 8.65 in (220 mm) | |
Weight | ||
4.3 lbs (2.0 kg) |
mc2e.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|