Polarized Condenser Microphone, Conference Tables, Altars, Lecterns

The Sennheiser e-912-S is a high-quality, pre-polarized condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars and lecterns.

The e912S can be switched on and off via an integrated membrane switch.

→ Programmable membrane switch
→ Unobtrusive, flat design
→ Extremely rugged sound inlet basket
→ Shock-absorbing rubber base
→ Available in black, white, or non-reflective Nextel® grey (shown)
→ Mounting slots for fixed installation in tables, lecterns, etc.
→ Gold-plated XLR connector
→ Integrated electronics (instead of in-line preamp)

Dimensions	5 x 4.1 x 1 in. (126.5 x 105 x 26.5 mm)
Frequency response	20 - 20.000 Hz
Max. sound pressure level (passive)	134 dB
Pick-up pattern	Half-Cardioid
Sensitivity in free field, no load (1kHz)	6 (10) mV/Pa Depending on adjusted frequency response curve
Transducer principle	Pressure gradient, permanently polarized condenser
Weight	1.2 oz. (550 g)
An internal DIP switch bank provides the following features	on/off (factory preset), push-to-talk button (PTT), push-to-mute button (PTM) or permanently switched on (ON)
The frequency response curve can be changed via a second DIP switch bank	low cut, low and high boost (factory preset), low boost or linear (see e 912).