Smallest Camera Link Frame Grabber Series

The PIXCI EB1miniH has an SDR Camera Link connector and FPGA on a separate circuit board for mounting to the side of a small chassis. Two very flexible cables connect to a half length Mini card for the PCI express connection. This allows for more mounting options in space constrained embedded systems that have half length mini PCIe slots or full length slots that have a half length mounting standoff. At the maximum Camera Link clock rate of 85 MHz, cables up to 10 meters long can be used.

Dimensions:
FPGA circuit board: 66.04 x 30.0 mm (2.6 x 1.181 inches)
Half mini circuit board: 26.8 x 30.0 mm (1.055 x 1.181 inches)
Cable length between circuit boards shown: 30.48 mm (12 inches)

Frame Grabber

• Base Configuration Camera Link
• MDR or SDR connector options
• Line Scan or Area Scan Cameras
• Supports more than 1000 different camera models
• Camera frame rate sequence capture
• Triggered image sequence capture
• Camera Integration & Async Reset Control
• LVTTL Trigger In and Strobe Out
• 50.95 mm long by 30.00 mm wide (2.006 in. by 1.181 in.)

Interface

• PCI Express Mini Card
• Full and Half Length versions
• 64-bit memory addressing
• Burst transfer at 250 megabytes per second
• 200 megabyte per second sustained data transfer

Software

• XCAP-Lite image capture, display, and save program included
• Capture video to computer memory with XCAP-LTD
• Stream video to disk with XCAP-STD
• XCLIB programmer libraries for frame grabber and camera control
• PXIPL image processing, measurement, and analysis libraries
• 3rd Party software available
• Windows & Linux, 32 & 64–bit