Search

FC-617 ID - 35MM, NTSC 30HZ

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The new FC-Series ID FC-617 ID combines best-in-class thermal image detail and high-performance edge perimeter analytics together in a single device that delivers optimal intrusion detection in challenging environments and extreme conditions.

With the FC-Series ID camera, you can set custom trip lines and regions of interest that will only trigger alarms for human or vehicular intruders.

Auto calibration for depth setup for a simple and reliable configuration. No additional measurement tools are needed, requiring only a single installer on site

Allows analytics in corridor mode, reducing the number of cameras and improving the total cost of ownership

Manual and automatic masking of area in the scene

Target hand-off to PTZ camera auto-tracking

Superior image quality in low-contrast conditions

FLIR’s custom AGCs provide unmatched image contrast

Dynamic Detail Enhancement (DDE) creates sharp edges and contrast that improve analytics performance

Camera Model

FC-3xx-ID FC-6xx-ID
Array Format (NTSC) 320 × 240 640 × 480
Detector Type Long-Life, Uncooled VOx Microbolometer
Pixel Pitch Effective 34 µm (FC-344 & 332) 
17 µm (all other models)
17 µm
Field of View 24° × 18°, f/1.0, 13 mm 
44° × 36°, f/1.0, 13 mm 
17° × 13°, f/1.0, 19 mm 
32° × 26°, f/1.0, 19 mm 
9.2° × 7.0°, f/1.1, 35 mm 
5.4° × 4.1°, f/1.25, 60 mm 
4.3° × 3.3°, f/1.1, 75 mm
44° × 36°, f/1.0, 13 mm
32° × 26°, f/1.0, 19 mm 
17° × 14°, f/1.1, 35 mm 
10° × 8.2°, f/1.25, 60 mm 
8.6° × 6.6°, f/1.1, 75 mm
Spectral Range 7.5 μm to 13.5 μm
Focus Range Athermalized, Focus-Free
Sensitivity <50mK for F# 1.0 optics

Input/Output

Composite Video NTSC or PAL Hybrid system with IP & analog video
Video over Ethernet Two independent channels of H.264 (Restricted VBR and CBR,10kbps-4Mbps, MPEG4, and MJPEG)
Streaming Resolution D1: 720 × 576 
4CIF: 704 × 576 
Native: 640 × 512 
Q-Native: 320 × 256 
CIF: 352 × 288 
QCIF: 176 × 144
Control Input/Output 1x Dry Contact in; 1x Relay Out (rated load 0.025A@ 5VDC)
Analog Video Output Composite 1Vp-p (PAL or NTSC), 1 x BNC 75Ω

Control

Ethernet 10/100 Mbps
External Analytics Compatible Yes
Network APIs Nexus SDK for comprehensive system control and integration; Nexus CGI for http command interfaces; ONVIF Profile S

General

Weight Without sunshield:      
Lens 13/19/35mm 60mm 75mm
Weight 1.8kg (4 lbs.) 2.0kg (4.5 lbs.) 2.2kg (4.75 lbs.)
With sunshield:      
Lens 13/19/35mm 60mm 75mm
Weight 2.2kg (4.75 lbs.) 2.4kg (5.25 lbs.) 2.5kg (5.5 lbs.)
Dimensions 
(L, W, H)
Without sunshield: 259 x 114 x 106 mm/10.2” x 4.5” x 4.2” 
With sunshield: 282 x 129 x 115 mm/11.1” x 5.1” x 4.5”
Power Consumption 
(Consult product manuals for detailed power requirements)
Source POE (802.3af) POE+ (802.3at) 12VDC 24VDC 24VAC(VA)
Heater off <5.5W <5.5W <5.5W <5.5W <8W
Heater on (@ 100%) N/A <25W <25W <25W <32W
Local Storage Support for 32GB SD Card (not supplied)
Approvals CE: EN55032; FCC 47 CFR Part 15, Subpart B, Class A (within CISPR 22:2008 Class A limits)
Surge Immunity on AC Power Lines EN 55024: 2010 and 55022: 2010 to 4.0kV on AC aux power lines; EN 50130-4:2011; IEC 62599-2:2010
Surge Immunity on Signal Lines EN 55024: 2010 and 55022: 2010 to 4.0kV

Environmental

IP Rating (dust & water ingress) IP66 & IP67
Operating Temperature Range -50°C to 70°C/-58°F to 158°F (Continuous Operation) 
-40°C to 70°C /-40°F to 158°F (Cold Start)
Storage Temperature Range -50°C to 85°C/-58°F to 185°F
Humidity 0-95% relative humidity
Shock MIL-STD-810G “Transportation”
Vibe IEC 60068-2-27

Image Optimization Features

Certifications IEC 60068-2-1:2007; IEC 60068-2-2:2007; ISTA-1A; IEEE 802.1x
Compliance RoHS Directive 2011/65/EU; WEEE 2012/19/EU
Analytics Management Web-based confguration and management, masking of analytic detection areas, adjustable sensitivity, automatic responses, remote I/O control
Thermal AGC Modes Auto AGC, Manual AGC, Plateau Equalization AGC, Linear AGC, Auto Dynamic Detail Enhancement (DDE), Max Gain Setting
Thermal AGC Region of Interest (ROI) Default, Presets and User definable to insure optimal image quality on subjects of interest
Image Uniformity Optimization Automatic Flat Field Correction (FFC); Thermal and Temporal Triggers
Analytics Features Region Entrance/Intrusion Detection, Crossover/Fence Trespassing, Auto/Manual Depth Setup, Human/Vehicle Rules


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.