Opto Engineering - TC2MHR036-F View Larger Image (in new window)

Opto Engineering : TC2MHR036-F

Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 565-7845
High resolution telecentric lens for 1″ detectors, magnification 0.353x, F-mount
Mechanical specifications
Magnification (x) 0.353
Image circle Ø (mm) 16.7
Mount F
Length (6) (mm) 168.7
Diameter (mm) 64
Mass (g) 701
Object field of view 8
with KAI-2020 14.8 mm diagonal w x h 11.84 x 8.88 (mm x mm) 33.5 x 25.2
with KAI-04050 16 mm diagonal w x h 12.8 x 9.6 (mm x mm) 36.3 x 27.2
with KAI-4022/4021 21.5 mm diagonal w x h 15.2 x 15.2 (mm x mm) Ø=43.1
with KAI-08050 22.6 mm diagonal w x h 18.1 x 13.6 (7) (mm x mm) Ø=38.5
Optical specifications
Working distance (1) (mm) 102.56
wF/# (2) 16
Telecentricity typical (max) (3) (deg) < 0.08 (0.10)
Distortion typical (max) (4) (%) < 0.08 (0.10)
Field depth (5) (mm) 10
CTF@ 50 lp/mm (%) > 30

1. Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
2. Working F-number (wF/#): the real F-number of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
3. Maximum slope of chief rays inside the lens: when converted to milliradians, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
4. Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
5. At the borders of the field depth the image can be still used for measurement but, to get a perfectly sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5 μm.
6. Measured from the front end of the mechanics to the camera flange.
7. With KAI-08050 (22.6 mm diagonal) detectors, the FOV of TC4MHRyyy-x lenses may show some vignetting at the image corners.
8. For the fields with the indication “Ø =”, the image of a circular object of such diameter is fully inscribed into the detector.

facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.