Search

Bosch NBN-63023-B DINION IP Starlight 6000 1080p

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The DINION IP Starlight 6000 1080p Hybrid Box Camera from Bosch captures 1080p HD images at up to 60 fps. The camera offers IP video and simultaneously outputs analog video via an SMB connector. This hybrid functionality offers a migration path from an analog CCTV to an IP-based surveillance system. The camera features a mechanical filter that allows it to capture images in mono with illumination as low as 0.0008 lux and in color to 0.0069 lux. The filter can be switched remotely, or automatically via a light level sensor or contact input.

  • Excellent low-light performance
  • Built-in Essential Video Analytics to trigger relevant alerts and quickly retrieve data
  • Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirements by up to 50%
  • Extended Dynamic Range mode to see details in bright and dark areas simultaneously
  • Auto back focus for fast installation
Sensor Type 1/2.8" CMOS
Effective Pixels (H x V) 1920 x 1080; 2 MP approximately
Sensitivity Color 0.0069 lux
Mono 0.0008 lux
3100K, reflectivity 89%, 1/25, f/1.2, 30IRE)
Dynamic Range High Dynamic Range: 120 dB WDR (10-bit, 3x exposure)
110 dB WDR measured according to IEC 62676 Part 5
Application Variant: Starlight mode (default) / HDR - extended dynamic mode
Frame Rate Base 25/30/50/60 fps (PAL/NTSC for analog output)
Mirror Image On / Off
Image Flip On / Off
Rotate 0/90/180/270°
LED Enable/disable
Analog Output Off, 4:3 letterbox, 4:3 crop, 16:9
Positioning Coordinates / mounting height
Wizard Autofocus, remote zoom
Video
Video Compression H.264 (MP); MJPEG
Streaming Multiple configurable streams in H.264 and MJPEG, configurable frame rate and bandwidth.
Regions of Interest (ROI)
Latency <60 ms (1080p 60)
GOP Structure IP, IBP, IBBP
Encoding Rate 1 to 50 (60) fps
Video Resolution 1080p Full HD: 1920 x 1080
Upright Mode 1080p: 1080 x 1920
1.3 MP (4:3): 1280 x 960
480p SD Encoding: 704 x 480; Displayed: 854 x 480
432p SD: 768 x 432
288p SD: 512 x 288
240p SD Encoding: 352 x 240; Displayed: 432 x 240
144p SD: 256 x 144
Functions Color:
Adjustable Picture Settings: Contrast, Saturation, Brightness
White Balance: 2500 to 10000K, 4 automatic modes (basic, standard, sodium vapor, dominant color), manual mode, and hold mode
Level Control Adjustable ALC
Saturation: Adjustable from peak to average
Shutter: Automatic Electronic Shutter (AES); Fixed shutter (1/25[30] to 1/15000) selectable
Default shutter
Day/Night: Auto (adjustable switch points), color, monochrome
Video Enhancement Sharpness: Enhancement level selectable
Backlight Compensation: On/off
Contrast Enhancement: On/off
Noise Reduction: Intelligent Dynamic Noise Reduction with separate temporal and spatial adjustments
Intelligent Defog: Intelligent Defog automatically adjusts parameters for best picture in foggy or misty scenes (switchable)
Behavior Analysis Essential Video Analytics
Configuration Silent VCA / Profile1/2 / scheduled / event triggered
Alarm Rules (Combinable): Any object, Object in field, Line crossing, Enter / leave field, Loitering, Follow route, Idle / removed object, Counting, Occupancy, Crowd density estimation, Condition change, Similarity search
Web Object Filters Duration, size, aspect ratio, speed, direction, color, object classes (4)
Tracking Modes Standard (2D) tracking, 3D tracking, 3D people tracking, museum mode
Calibration Automatic based on gyro / accelerometer data and camera height
Tamper Detection Maskable
Detection Audio
Input/Output
Analog Video Out CVBS (PAL/NTSC), 1 V p-p, SMB, 75 Ohms (surge protected)
Audio Connectors 2 x 3.5 mm stereo jack
Audio Line Input 12 kOhms typical, 1 Vrms max
Audio Line Output 1 Vrms at 1.5 kOhms typical
Alarm Input Connectors: Clamp (x2 non-isolated closing contact)
Input Activation Voltage: 5 VDC to 40 VDC (3.3 VDC with DC-coupled 22 kOhms pull-up resistor)
Alarm Output Connector: Clamp
Voltage: 30 VAC or 40 VDC
Maximum 0.5 A continuous, 10 VA
Ethernet RJ45
Data Port RS‑232/422/485
Audio
Standard G.711, 8 kHz sampling rate
L16, 16 kHz sampling rate
AAC-LC, 48 kbps at 16 kHz sampling rate
AAC-LC, 80 kbps at 16 kHz sampling rate
Signal-to-Noise Ratio >50 dB
Audio Streaming Full-duplex / half duplex
Software
Unit Title Discovery: IP Helper
Unit Configuration Via web browser or Configuration Manager
Firmware Updates Remotely programmable
Viewing Web browser; Video Security Client; Video Security App; Bosch Video Management System; Bosch Video Client; or third party software
Local Storage
RAM Internal: 60 sec pre-alarm recording
Memory Card Slot Supports up to 32 GB microSDHC / 2 TB microSDXC card (a memory card of Class 6 or higher is recommended for HD recording)
Recording Continuous recording, ring recording, alarm, events, schedule recording
Network
Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIBII), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication
Encryption TLS 1.2, SSL, DES, 3DES
Ethernet 10/100Base-T, auto-sensing, half/full duplex
Connectivity Auto-MDIX
Interoperability ONVIF Profile S; GB/T 28181
Optical
Lens Mount CS-mount (C-mount with adapter ring)
Lens Connector Standard 4-pin DC-iris connector
Lens Type Manual and DC-Iris auto-detect with override DC-iris drive maximum 50 mA continuous
Lens Control Wizard from web page or camera button
Environmental
Operating Temperature -4 to 131°F (-20 to 55°C)
Storage Temperature -22 to 158°F (-30 to 70°C)
Operating Humidity 20 to 93% RH
Storage Humidity up to 98% RH
Power
Input Voltage Power-over-Ethernet (48 VDC nominal) and/or +12 VDC ±10% (auxiliary)
PoE IEEE 802.3af (802.3at Type 1) Class 3
Power Consumption 7.2 W maximum
Current Draw PoE: 200 mA maximum
12 VDC: 600 mA maximum
Certifications and Approvals
Emission EN 55032:2012 /AC2013 class B, EN 50121-4:2006 /AC:2008, FCC: 47CFR15, class B (2015-10-1)
Immunity EN 50130-4:2011 /A12014 (PoE, +12VDC), EN 50121-4:2006 /AC:2008
Environmental EN 50130-5:2011 Class II
Safety EN 62368-1:2014/AC:2015
EN 60950-1:2006 /A11:2009 /A1:2010 /A12:2011 /A2:2013
UL 62368-1, Ed. 2, Dec 1st, 2014
UL 60950-1, Ed. 2, October 14, 2014
CAN/CSA-C22.2 No. 62368-1
CAN/CSA-C22.2 No. 60950-1
HD SMPTE 274M-2008
Certification UL, CE, cULus, WEEE, PADS, RCM, EAC
ONVIF Conformance EN 50132-5-2:2011/AC:2012, EN 62676-2-3:2014
Mechanical
Tripod Mount Bottom (isolated) and top 1/4" 20 UNC
Color RAL 9007 Metallic titanium
Dimensions 3.1 x 2.6 x 5.5" (7.8 x 6.6 x 14 cm) without lens
Weight 1.52 lb (0.68 kg) without lens
Packaging Info
Package Weight 2.15 lb
Box Dimensions (LxWxH) 7.7 x 3.9 x 3.8"


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.