(discontinued) Wall Plate 4K DigitalMedia 8G+® Transmitter 100

This product has been discontinued. For an alternative, please see the Crestron DM-TX-4KZ-100-C-1G

The DM-TX-4K-100-C-1G provides a simple, cost-effective interface solution for a single HDMI, DVI, or Dual-Mode DisplayPort source as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® transmitter and control interface, providing a single HDMI® input along with RS-232 and IR control ports. In addition to DM 8G+, it is also compatible with HDBaseT®, allowing it to be connected directly to an HDBaseT certified receiver or display device.

Its 1-gang mountable design allows the DM-TX-4K-100-C-1G to be flush mounted in a wall or presentation lectern. It can also be mounted beneath a table or attached to a suitable flat surface using the mounting bracket provided. It connects to the head end or display location using a single CAT type twisted pair cable. Standard gang-box mounting (3-1/2" deep) allows for installation adjacent to an Ethernet jack (Crestron MP-WP183 or equivalent) for a total connectivity solution.

A single HDMI digital AV input port is provided on the DM-TX-4K-100-C-1G for connection of a laptop computer, mobile device, or other AV source. The HDMI input can also handle DVI and Dual-Mode DisplayPort signals using an appropriate adapter or interface cable.

A single CAT type cable connects the DM-TX-4K-100-C-1G to a DM switcher or receiver, or to an HDBaseT device, transporting video, audio, control, and power signals all through one simple RJ45 connection. Used with a single DM 8G+ Receiver/Room Controller, the DM-TX-4K-100-C-1G affords a simple solution for extending a computer or AV signal to a single display. As part of a larger system using a DM-MD series switcher, multiple DM-TX-4K-100-C-1Gs may be installed to enable the distribution of several sources at different locations to feed multiple displays throughout any room or larger facility.

Embedded Device Control
The DM-TX-4K-100-C-1G includes built-in RS-232 and IR control ports to allow for programmable control of the connected source device (via a control system). Additional control capability is afforded by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to the control system, the DM-TX-4K-100-C-1G provides a gateway for controlling the source right through its HDMI connection, potentially eliminating the need for a dedicated serial cable or IR emitter.[

Versatile Mounting Options
The DM-TX-4K-100-C-1G is designed to be installed using a 3-1/2" deep 1-gang electrical box or plaster ring (not included). It can also be mounted beneath a table or attached to a suitable flat surface using the mounting bracket provided, or it can be fastened to a single rack rail in an equipment cabinet. The DM cable connects to the rear of the transmitter via a shielded RJ45 DM port. The unit can be powered using the wall mount power pack (included), or PoDM (Power over DigitalMedia) for a true one-wire solution. An array of indicators is provided for easy setup and troubleshooting.

Available configurations:

DM-TX-4K-100-C-1G-B-T Wall Plate 4K DigitalMedia 8G+® Transmitter 100, Black Textured

DM-TX-4K-100-C-1G-W-T Wall Plate 4K DigitalMedia 8G+® Transmitter 100, White Textured

• Cost-effective DigitalMedia 8G+® transmitter
• Connects to a DM® switcher or receiver over a single CAT type twisted pair cable [2]
• HDBaseT® Certified — Enables direct connection to other HDBaseT certified equipment
• Provides one HDMI® input [4]
• Also supports DVI and Dual-Mode DisplayPort sources [4]
• Handles video resolutions up to 4K and Ultra HD
• Handles 3D video and Deep Color
• Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
• HDCP 2.2 compliant
• Supports cable lengths up to 330 ft (100 m) for all resolutions up to UHD and 4K using DM Ultra cable [2]
• Supports cable lengths up to 330 ft (100 m) for 1080p, WUXGA, and 2K using DM 8G® cable or CAT5e [2]
• Supports cable lengths up to 230 ft (70 m) for UHD and 4K using DM 8G cable, or 165 ft (50 m) using CAT5e [2]
• Enables device control via CEC, IR, and RS-232 [1,7]
• Powered via the DM connection or local power pack (included) [5,6]
• 1-gang wall box mount design (3-1/2" deep)
• Surface mount bracket included
• Available in white or black finish