Call Now: 1-800-284-2288 |
(discontinued) Crestron CPU Blade for DM-MD64X64, DM-MD128X128 |
|
|
|
|
This item is DISCONTINUED.
The DMB-4K-CPU provides a backup replacement CPU blade for a DM-MD64X64 DigitalMedia™ Switcher or a DM-MD128X128 DigitalMedia™ Switcher. Offers an upgrade to previous model DMB-CPU to enable video preview monitoring of 4K sources, a dedicated Dante® audio networking port, faster boot times, and overall improved performance.
The DMB-4K-CPU features several enhancements over its predecessor, model DMB-CPU. Enhancements include support for video preview monitoring of 4K and Ultra HD sources on the switcher’s front panel touch screen, a dedicated Dante® audio network port, a USB service port, and a more powerful processor for faster boot times, improved touch screen and web UI response, and increased throughput for endpoint control signals. No programming changes are required when upgrading from an older CPU blade.
The DMB-4K-CPU includes an analog line-level audio output, which can be used to feed an external stereo amplifier and speakers for local audio monitoring. Built-in surround sound decoding and downmixing allows multichannel audio sources to be monitored. Volume and mute controls for this output are provided via the switcher’s front panel touch screen or a web browser.
Available configurations
DMB-4K-CPU-64 CPU Blade for DM-MD64X64
DMB-4K-CPU-128 CPU Blade for DM-MD128X128
- A CPU blade replacement or upgrade for DM-MD64X64 or DM-MD128X128 DigitalMedia™ Switchers
- More powerful processor for improved performance and faster boot times
- Enables video preview monitoring of 4K and Ultra HD sources
- Dedicated Dante® audio networking port
- Stereo line-level audio monitoring output with surround sound downmixing
- USB port for configuration save/load and firmware update via flash drive
- No programming changes required when upgrading from an older CPU blade
| Communications | |||||||||||||||||||||||||||||||||||
| Ethernet | 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, Private Network Mode, HTTPS web browser setup and control, Crestron control system integration | ||||||||||||||||||||||||||||||||||
| Dante | Dante network interface via LAN port or dedicated DANTE port | ||||||||||||||||||||||||||||||||||
| USB | USB 2.0 host for USB mass storage devices, supports save/load of configuration and EDID settings, supports firmware update | ||||||||||||||||||||||||||||||||||
| Video | |||||||||||||||||||||||||||||||||||
| Preview Scaler | (1) 4K video scaler for switcher’s front panel preview monitor, motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion, content-adaptive noise reduction | ||||||||||||||||||||||||||||||||||
Maximum Source Resolutions
|
|||||||||||||||||||||||||||||||||||
| NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz | |||||||||||||||||||||||||||||||||||
| Audio | |||||||||||||||||||||||||||||||||||
| Input Signal Types | Dante | ||||||||||||||||||||||||||||||||||
| Output Signal Types | Dante, analog stereo for local monitoring | ||||||||||||||||||||||||||||||||||
| Dante I/O | Up to 120 stereo channels in and/or out at up to 24-bit 48 kHz | ||||||||||||||||||||||||||||||||||
| Analog Output Downmix Decoding | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS HD Master Audio, DTS-X®, LPCM up to 8 channels | ||||||||||||||||||||||||||||||||||
| Digital-To-Analog Conversion | 24-bit 48 kHz | ||||||||||||||||||||||||||||||||||
| Analog Volume Adjustment | -80 to 0 dB plus mute, adjustable via switcher’s front panel touch screen or web browser | ||||||||||||||||||||||||||||||||||
| Connectors | |||||||||||||||||||||||||||||||||||
| LAN | (1) 8-pin RJ45 connector, shielded, female; 10Base-T/100Base-TX/1000Base-T Ethernet LAN port |
||||||||||||||||||||||||||||||||||
| DANTE | (1) 8-pin RJ45 connector, shielded, female; 1000Base-T Dante network port |
||||||||||||||||||||||||||||||||||
| USB | (1) USB Type A connector, female; USB 2.0 host port for connection of a USB flash drive; For save/load of configuration and EDID settings and for firmware update |
||||||||||||||||||||||||||||||||||
| AUDIO OUT | (1) 5-pin 3.5mm detachable terminal block; Balanced/unbalanced stereo line-level output for local monitoring; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced |
||||||||||||||||||||||||||||||||||
| Controls & Indicators | |||||||||||||||||||||||||||||||||||
| ACT | (1) Green LED, indicates CPU activity | ||||||||||||||||||||||||||||||||||
| MSG | (1) Red LED, indicates CPU has generated an error message | ||||||||||||||||||||||||||||||||||
| CPU RESET | (1) Recessed pushbutton, reboots the CPU and front panel | ||||||||||||||||||||||||||||||||||
| LAN | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity | ||||||||||||||||||||||||||||||||||
| DANTE | (2) LEDs, green LED indicates Dante network link status, amber LED indicates Dante network activity | ||||||||||||||||||||||||||||||||||
| Construction | |||||||||||||||||||||||||||||||||||
| Plug-in blade, occupies the CPU blade slot of a DM-MD64X64 switcher, includes metal faceplate w/black finish | |||||||||||||||||||||||||||||||||||
| Weight | |||||||||||||||||||||||||||||||||||
| 1.6 lb (726 g) | |||||||||||||||||||||||||||||||||||
| Compliance | |||||||||||||||||||||||||||||||||||
| CE, IC, FCC Part 15 Class B digital device | |||||||||||||||||||||||||||||||||||
| dmb-4k-cpu-64-specs.pdf | datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|
