Quickset MPT-90 Pan and Tilt Positioner with embedded web server, GPS, and payload of 100lbs

The Quickset MPT90 Positioner leverages the strength and reliability of Moog legacy products and is improved with an enhanced electronics package offering new advantages to mission critical applications.

MPT-90 Positioners are equipped with an integrated Health and Usage Monitoring System (HUMS). This provides intelligence to users regarding the condition of payloads, allowing for preventative maintenance to extend the life of critical equipment. An embedded web server enables easy discovery and control of all positioners and integrated components on a network thereby eliminating the need for 3rd party software. Expanded velocity control offers the MPT90 finer resolution of speed and acceleration control, ultimately improving tracking and scaling applications. Users will enjoy the capacity of multiple configurable communication ports for convenient payload integration and communication.

Control and Configurability

• Embedded web server

• Serial or Serial over IP control up to 99Hz

• Health and usage monitoring

• HD-SDI slip ring models available

• Continuous Rotation available

• Multiple payload communication ports: 4 configurable serial, 2 TTL and 1 IP port

• 10-bit linear response velocity control

• Standardized connectors

• GPS capability

Robust and reliable mechanical design

• Payload capacity up to 100 pounds

• Provides up to 90 foot pounds of elevation torque

• Versatile platform design for ease of customization

• Tabletop design accommodates a wide variety of payloads

Payload Capacity: 100 lb

Payload Rated Load Torque (Elevation): 90 lb·ft (122 N·m)

Positioner Power Consumption

     Max (simultaneous P&T move): 4.5 A peak, 3 A continuous

     Standby (Idle, w/o heater): 650 mA.

     Heater Power (switchable): 100W

     Operating Voltage Range: 24VDC (+4/-0 VDC): 24 - 28 VDC Nominal, up to 70V capable

Azimuth - Pan

     Range of Travel: Continuous, 435° models available

     Speed: (@ rated load, nominal voltage): 0.005°/s to 25°/s

Elevation - Tilt

     Range of Travel: 180° (± 90° from horizon)

     Speed: (90 lb-ft load): 0.005°/s to 8°/s

Minimum Incremental Move (Az and/or El): 0.01°

Rotation Limits

     Software Adjustable Limits: Individually adjustable azimuth and elevation (all models)

     Mechanically Adjustable Switches: Individually adjustable azimuth & elevation (435° model), Adjustable elevation (continuous rotation models)

Position Feedback

     9000 Line Encoder: Azimuth and Elevation

     Resolution: 0.01°

Position Repeatability: 0.05°

Environmental: IP67

Operating Temperature

     without heater: -15°C to 55°C

     with internal heater: -30°C to 55°C

Construction: Cast Aluminum Housing, Stainless Steel Hardware

     Drive System: 1.8° stepper motors, Hardened Steel Worm Drive Geartrain

     Exterior Finish: Powder Coat White, special finishes available

     Weight: HD-SDI model: 75 lb Standard model: 70 lb

     Dimensions: HD-SDI model: 19.59"H (498 mm) x 18.07"W (459 mm) x 9.57"D (243 mm) Standard model: 16.42"H (417 mm) x 18.07"W (459 mm) x 9.57"D (243 mm)

Command and Control: Integral Web Server

Protocol: Moog PTCR-1000*, Pelco-D

Resolution of Velocity Commands: 10-bit, linear response

Power Outputs to Payload

     24 VDC - user on/off switchable: 5 Amp Max.**

     12 VDC - user on/off switchable: 5 Amp Max.**

     5 VDC - user on/off switchable: 4.8 Amp Max.**

     3.3 VDC - constant power: 0.6 Amp Max.**

Health Monitoring w/Real Time Clock

     Power On and Run Time Monitoring: Included

     Voltage Monitoring: Input and User 24V, 12V & 5V Outputs

     Current Monitoring: User 24V, 12V & 5V Outputs

Communication Interfaces to Payload

      Serial (RS232, RS422, RS485 configurable): 4

      TTL: 2

      IP: 1

Connector to Positioner: 53 conductor D38999

Connector to Payload: 53 conductor D38999 (x2)