Rugged, Outdoor, Stainless steel camera enclosure

Pelco's EHS8000 Series rugged outdoor enclosure is designed to protect camera and lens components in adverse environmental conditions. The stainless steel construction increases reliability and reduces the cost of maintenance.

The EHS8000 Series enclosure is easily installed in the field and its rugged construction and high-quality seals prevent impurities from contaminating camera and lens components.

Constructed of corrosion-resistant 316L stainless steel to IK10 and IP66 and IP68 ratings, the rugged EHS8000 Series features a mounting cradle, sled and track assembly for camera mounting for easy access to the camera and lens. Power, video, and lens control cables are routed through environmentally sealed gland fittings on the rear of the enclosure.

All EHS8000 Series enclosures come standard with heater and blower. Power input options include 24 VAC, 230 VAC and Power over Ethernet while providing 24 VAC, 12 VDC, or POE power to the camera depending on the model. A sun shroud shields the enclosure from direct sunlight and reduces the internal temperature by approximately 6° to 10°C (10° to 15°F). The sun shroud and a wall mount bracket come standard with every unit.

Recommended for use with the Sarix Enhanced Next Generation series cameras

Available configurations

EHS8000-2-H  24 VAC

EHS8000-3-H  230 VAC w/ 12 VDC to camera

EHS8000-P-H HPOE input with PoE output to camera

Mounts Available

 EMS8000 Wall Mount

 EPS8000 Pole Mount Bracket

• High Reliability 316L Stainless Steel Construction
• Temperature Range from -30° to 50°C (-22° to 122°F)
• Meets IP66/IP68 and Type 6P Standards
• IK10 Mechanical Resistance, Vandal Resistance
• All Models Include Heater and Blower
• 24 VAC, Power Over Ethernet (PoE), and 230 VAC models
• Advanced Optics for Megapixel Camera Support
• Cable Entry Glands At the Rear of the Enclosure
• Integrated Cradle on Bottom of the Enclosure For Mounting or Used In Conjunction With Included Wall Mount
• Easy Access for Servicing and Installation
• Sun Shroud and EMS8000 mount included

MECHANICAL

Camera Mounting Internal camera sled with adjustable positioning

Camera and Lens Size Accepts camera and lens combinations up to 22.86 x 10.16 x 7.62 cm (9-in L x 4-in W x 3.5- in H)

Viewing Window High optic grade soda lime glass, 4K ready

Viewing Area 3.00-inch diameter

Cable Entry

Maximum Cable Diameters 0.45 in (11.4 mm)

Cable Entry Holes 2 x M20 compression glands

Fastening for Front and Rear of the Enclosure   M5 screws with Torx head

CERTIFICATIONS

• CE
• ICES-003 (Class A)
• UL/cUL Listed
• UL/IEC 60950-22 (TBD)
• Meets Type 6P, IP66, and IP68 standards
• IK10 Mechanical Impact Resistance (Mechanical enclosure only, not the front window)
• KCC
• RCM

ELECTRICAL

Input Power 24 VAC, HPOE, or 230 VAC

Input Voltage

• HPoE Preliminary IEEE802.3BT
• 24 VAC ±10%, up to 40W (without camera), up to 53W (with 13W camera), 24 VAC output to camera
• 230 VAC ±10%, up to 40W (without camera), up to 53W (with 13W camera), 12 VDC output to camera

Maximum Power Output to Camera 13W

GENERAL

Construction 316L stainless steel

Finish Electropolished

Environment Indoor/environmental ambient temperature -30° to 50° C (-22° to 122°F)

Unit Length

• Base 55.0 cm (21.65 in)
• Overall 65.1 cm (25.63 in)