Pelco - ExSite Enhanced Fixed View Larger Image (in new window)

Pelco : ExSite Enhanced Fixed

Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 565-7845
ExSite Enhanced High Reliability, Full HD Fixed Explosion-proof IP Camera System

ExSite Enhanced Series camera systems are designed to meet demanding explosionproof requirements, providing high reliability, ease of installation, and best-in-class imaging and technology. The ExSite Enhanced Series is designed for rugged environmental applications including oil and LNG facilities, refineries, on and offshore drilling rigs, and on-board marine applications. Featuring rugged 316L stainless steel construction that has been subjected to extensive vibration and environmental testing make it ideal for use in the most extreme conditions of temperature, moisture, ice, and dust. The system can operate from –60° to 60°C (–76° to 140°F) while maintaining compliance to the T6 (<85°C) surface temperature specifications. ExSite Enhanced Series cameras are easy to install and adaptable to most operational needs. The camera has dual-entry ports, allowing for separate transmission and power cables, and it is adaptable to most transmission methods via SFP/FSFP modules. ExSite Enhanced cameras support a range of input power options with a new 48 VDC option that enables installation in DC-only facilities. ExSite Enhanced cameras also come standard with wipers and sun shrouds, capturing desired video regardless of the weather.

The ExSite Enhanced also comes in a PTZ Model

Available Fixed Models

EXF1230-4N Fixed, 48 VDC 1080p

EXF1230-7N Fixed, 100-240 VAC 1080p

Up to 1920 x 1080p Resolution Wide Dynamic Range (WDR), 30x zoom lens, and Superb Low light Performance

Dual Stream H.264 IP Video with Smart Compression

Rated to Operate from -60 to +60° C while in Compliance to T6 Surface Temperature (<85° C) Hazardous Location Regulations

316L Billet Stainless Steel Electro Polished Construction

Standard IP Ethernet Connection and Integrated Transmission Options including Fiber, Ethernet over Coax, and UTP Extension

Full Suite of Built-In Analytics including Adaptive Motion Detection, Abandoned Object, and More

Electronic Image Stabilization

ONVIF Profiles S, G, and Q Conformant

Efficient Installation with a Safety Attach Point, and Simple Wire Termination Methods.

Dual Entry Ports to Separate Data and Power Cables


Sensor Type 1/2.8-inch Type Exmor CMOS Sensor

Optical Zoom 30X

Digital Zoom 12X

Maximum Resolution 1920 x 1080

Aspect Ratio 16:9

Lens f/1.6 ~ f/4.7, focal length 4.3 mm (wide) ~ 129.0 mm (tele)

Horizontal Angle of View 63.7° wide - 2.3° tele

Light Sensitivity* Color (33 ms) 0.03 lux Color (250 ms) 0.008 lux Mono (33 ms) 0.004 lux Mono (250 ms) 0.001 lux

Day/Night Capabilities Yes

Shutter Range 1/1 ~ 1/10,000 sec

Signal-to-Noise Ratio >50dB

IR Cut Filter Yes

Wide Dynamic Range 130 db

Iris Control Auto iris with manual override

Backlight Compensation Yes

Automatic Gain Control Yes

Active Noise Filtering Yes; 3D Noise Filtering

Electronic Image Stabilization (EIS) Yes *Sensitivity in lux for 90% reflectance, f/1.6 (wide angle), 50 dB gain at 30 IRE (30% of signal level) with Sensitivity Boost OFF; 4X improvement to sensitivity with Sensitivity Boost ON


Video Encoding H.264 High, Main, or Base profiles and MJPEG

Video Streams Up to 2 simultaneous streams; the second stream is variable based on the configuration of the primary stream

Frame Rate Up to 60, 30, 25, 15, 12.5, 10, 8.333, 7.5, 6, 5, 3, 2.5, 2, 1 (depending on the coding, resolution, and stream configuration)


Construction 316L billet electropolished stainless steel with robotic guided laser welding and 100% hydrostatic pressure testing

Window High transmissivity glass

Sun Shroud 316L stainless steel with laser etched logo (passivated for environmental protection)

Weight EXF1230-4N: 38.0 lb (17.2 kg) EXF1230-7N: 38.0 lb (17.2 kg)

Effective Projected Area 191 in2 (EPA)

Reset Capabilities Internal reset button for servicability; remote hard-wire reset; remote software restart



  • Unsupervised Detects open or closed alarm state
  • Supervised Detects open and short alarm state with external 1-kohm resistor to detect alarm tampering
  • Input 3.5 VDC maximum, 3.5 mA maximum

Relay Output 30 VDC, 500 mA maximum

Input Power Options 48 VDC, 2A or 100-240 VAC, 2A, @ 50/60 Hz

Input Voltage Range ±10%


Ethernet Interface Ethernet (1000Base-TX or100Base-TX) Auto MDI/MDI-X Auto-negotiate/manual setting

Ethernet Cabling Type Cat5e or better

FSP/FSFP Interface Supports Pelco FSFP Series Transceivers (input models) and third-party MSA Compliant Tranceivers

Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL, SMTP, FTP, and 802.1x (EAP)


  • Unicast Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams)
  • Multicast Unlimited users H.264

Security Access Password protected

Software Interface Web browser view and setup

Pelco System Integration Endura 2.0, Digital Sentry 7.3 and Pelco VideoXpert 1.9 (or later)

Open API Pelco API or ONVIF Profile S, G, and Q

Mobile Application Integrated to Pelco Mobile App

Video Motion Detection Simple motion detection and camera sabotage

Local Storage SDXC, addressable to 2TB Capture 1–5–10 second video clips on camera sabotage, motion detection, or alarm input; record video continuously in the case of network outage with option to overwrite; access video through FTP protocol and ONVIF Profile G

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.