Power Supplies for Pelco Ethernet Connect Products

The 12 VDC and 48 VDC Power Supply Products are accessories that support the IP/analog fiber and EthernetConnect™ products. These accessories provide a range of options to provide power to fiber applications, power over copper (PoC) applications, and PoE applications. The 12 VDC, and 48 VDC Power Supply Products provide excellent voltage and current alternatives for powering stand-alone IP/analog fiber and Ethernet modules. The 48 VDC, 5 A and 10 A power supplies are ideally suited for PoE applications.

Available Configurations

ECPS-12VDC-0.5A  12 VDC, 0.5 A, Power Supply Provides Power to Stand-Alone Units

ECPS-12VDC-3A   12 VDC, 3 A, Power Supply Provides Power to Stand-Alone Units

ECPS-48VDC-5A  48 VDC, 5 A, Power Supply, DIN Rail Mount, Ideally Suited for PoE Applications

ECPS-48VDC-10A  48 VDC, 10 A, Power Supply, DIN Rail Mount, Ideally Suited for PoE Applications

12 VDC Power Supply Products

ECPS-12VDC-0.5A 12 VDC, 0.5 A switching power supply ECPS-12VDC-3A 12 VDC, 3 A switching power supply

ELECTRICAL

Input Voltage Range 100 to 240 VAC

Input Frequency Range 50 to 60 Hz Input

Power Consumption <0.3 W (at no load)

Input Current

ECPS-12VDC-0.5A 0.3 A RMS maximum

ECPS-12VDC-3A 1 A RMS maximum

Output Voltage 12 VDC

Output Load Range

ECPS-12VDC-0.5A 0.5 A maximum

ECPS-12VDC-3A 3 A maximum

MECHANICAL

Input Pins Includes input pin heads for US/North America, Europe, Australia, and UK Note: Refer to the Product Features section for pictorial descriptions.

Dimensions

ECPS-12VDC-0.5A 6.4 x 4.1 x 3.0 cm (2.5" D x 1.6" W x 1.2" H)

ECPS-12VDC-3A 7.4 x 4.4 x 3.5 cm (2.9" D x 1.7" W x 1.4" H)

Unit Weight 0.25 kg (0.55 lb)

Shipping Weight <0.45 kg (1 lb)

GENERAL

Operation Temperature 0° to 40°C (32° to 104°F)

Storage Temperature –10° to 70°C (–4° to 158°F)

Relative Humidity 20% to 80%, noncondensing

CERTIFICATIONS/RATINGS

CE, Class A

FCC, Class A

UL/cUL Listed

C-Tick

 

48 VDC 5 A Power Supply Products

ECPS-48VDC-5A 48 VDC switching power supply, 240 W

ELECTRICAL

Output

Output Voltage Trim Range

Typical VDC Minimum 48 VDC

Typical VDC Maximum 56 VDC

Typical Current 5 A

Efficiency >90% at 115 VAC, >92% at 230 VAC

Line Regulation <0.5% typical

Load Regulation <1% typical

Output Voltage Tolerance ±1% (initial set point tolerance from factory)

Hold-Up Time >20 ms at 115 VAC and 230 VAC (100% load)

Output Overvoltage Protection <57 VDC

Output Short Circuit Protection Hiccup mode, non-latching (auto-recovery when the fault is removed)

Rated Overload Protection >150% of rated load current, hiccup mode, non-latching (auto-recovery)

Input

Rated Input Voltage Range

AC 85 to 264 VAC

DC 120 to 375 VDC

Rated Input Current at Vinput 115 VAC: 2.5 A; 230 VAC: 1.3 A

Frequency Range 47 to 63 Hz

Maximum Inrush Current  <35 A

MECHANICAL

Cooling Natural convection: requires 5.0 cm (2.0 in) free space above and below and lateral distance of 2.0 cm (0.79 in) from other units to ensure adequate cooling

Cable Mount Screw Terminal Blocks 12 to 20 AWG flexible or solid cable

Dimensions 12.1 x 8.5 x 12.4 cm (4.8" D x 3.4" W x 4.9" H)

Unit Weight 0.96 kg (2.12 lb)

Shipping Weight <1.75 kg (3.86 lb)

GENERAL

Operating Temperature –25° to 80°C (–13° to 176°F)

Power Derating

Vertical Mounting >50°C, derate power by 2.5%/°C

Horizontal Mounting >40°C, derate power by 2.5%/°C

Storage Temperature –25° to 85°C (–13° to 185°F)

Relative Humidity <95%, noncondensing

CERTIFICATIONS/RATINGS

CE, Class B

FCC, Class B

UL/cUL Recognized

 

48 VDC 10 A Power Supply Products

ECPS-48VDC-10A 48 VDC switching power supply, 480 W

ELECTRICAL

Output

Output Voltage Trim Range

Typical VDC Minimum 48 VDC

Typical VDC Maximum 56 VDC

Typical Current 10 A

Efficiency >91% at 115 VAC, >93% at 230 VAC

Line Regulation <0.5% typical

Load Regulation <1% typical

Output Voltage Tolerance ±1% (initial set point tolerance from factory)

Hold-Up Time >20 ms at 115 VAC and 230 VAC (100% load)

Output Overvoltage Protection <57 VDC

Output Short Circuit Protection Hiccup mode, non-latching (auto-recovery when the fault is removed)

Rated Overload Protection >150% of rated load current, hiccup mode, non-latching (auto-recovery)

Input

Rated Input Voltage Range

AC 85 to 264 VAC

DC 120 to 375 VDC

Rated Input Current at Vinput 115 VAC 5 A; 230 VAC 3.0 A

Frequency Range 47 to 63 Hz

Maximum Inrush Current  <35 A

MECHANICAL

Cooling Natural convection: requires 5.0 cm (2.0 in) free space above and below and lateral distance of 2.0 cm (0.79 in) from other units to ensure adequate cooling

Cable Mount Screw Terminal Blocks 12 to 20 AWG flexible or solid cable

Dimensions 12.1 x 14.4 x 11.9 cm (4.8" D x 5.7" W x 4.7" H)

Unit Weight 1.37 kg (3.02 lb)

Shipping Weight <2.20 kg (4.85 lb)

GENERAL

Operating Temperature –25° to 75°C (–13° to 167°F)

Power Derating Vertical Mounting Only >50°C, derate power by 2.5%/°C >70°C, derate power by 5%/°C

Storage Temperature –25° to 85°C (–13° to 185°F)

Relative Humidity <95%, noncondensing

CERTIFICATIONS/RATINGS

CE, Class B

FCC, Class B

UL/cUL Recognized