Search

Fujinon's CF-ZA-1S series 4D High Resolution Machine vision Lenses

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

Fujinon CF50ZA-1S, one of Fujinon's new CF-ZA-1S series 4D High Resolution Machine vision Lenses, supports large high-resolution sensor of 1.1" type with 2.5µm pixel pitch (equivalent to 23 mega-pixel). The relative illumination reaches up to above 90%*, and a clear image can be obtained from the image center to the peripheral area.

Relative illumination reaches up to above 90%*

In general, the illumination of the peripheral area of the image is determined by "relative illumination" and "chief ray angle (CRA)". CF50ZA-1S adopts the original optical design of Fuji film with the relative illumination up to above 90%* (lens monomer) and supports 1.1" type large sensor, and restrains CRA below 5°. Because the two are relatively balanced to each other, the clear and bright image can be obtained from the peripheral area.

In general, in order to improve the difference between light and shade in the center and peripheral area, the correction treatment of the image can only highlight the "noise" but cannot obtain good image, while CF50ZA-1S has no need to correct illumination and realizes uniform illumination including the peripheral area, thus the high-quality image with low noise can be obtained. It is most applicable to the inspection demanding higher reliability.

* When the F4 F-Stop is used more frequently by users.

"4D High Resolution" keeps uniform high resolution from the image center to peripheral area and can restrain the decline of resolution caused by shooting distance or F-Stop, which is the original high-resolution performance of Fujinon CF50ZA-1S lens. Therefore, the high-resolution image can be obtained under various setting and photographic conditions. Supporting 1.1" type sensor and  3.45μm pixel pitch (equivalent to 12 mega-pixel) makes the most use of camera performance. Especially, it is most applicable to IMX253 (1.1" type) and IMX255 (1" type).

The CF50ZA-1S lens supports next generation sensors which are becoming more sensitive. It is good for 1.1" type sensor and 2.5μm pixel (equivalent to 23 mega-pixel).

Restrain unilateral bokeh and single flaw through high-precision assembly technology and original detector.

Adopt the FUJIFILM's original mechanical structure design of "vibration-resistance and impact-resistance"

Conduct strict vibration test according to JIS C 60068-2-6¹ and CF50ZA-1S will keep high resolution prior to and after the test.

Under the circumstance that the robot vision and 3D scanning, etc.
are hit, even by maximum a 10G² hit, the optical axis variation
(picture dislocation) is only below 10μm.

Without excessive use of glue and by adoption of the company's
original mechanical structure³, the degradation caused by humidity,
heat and long lasting will not occur.

The performance of "vibration-resistance and impact-resistance" is secured even though the iris can be adjusted. These features makes operation easier.

1: [According to JIS C 60068-2-6], vibration frequency 10-60Hz (amplitude 0.75mm), vibration frequency 60-500Hz (acceleration 100m/S2), and scanning round 50 cycle
2: Applicable value of hit G varies from model to model
3: The company's original technology that has been patented

High convenience and reliability

By adopting internal mechanical focus, the overall length of CF50ZA-1S lenses will not change when focused

Provided with 3 positioning holes for fixation of the Iris and focusing on CF50ZA-1S lens body and the positioning hole can be selected according to setting conditions.

Having a indication sign on the CF50ZA-1S lens that shows the optimal focus position when the subject is 50cm apart helps you to detect the flange back dislocation effectively.

The "anti-separation structure" is implemented on the knob of the Iris and focusing screw even if it is shaken violently, the screw will not fall off.

When manufactured, the optical performance results of each CF50ZA-1S lens are managed by the factory.
As the tool for FUJIFILM quality management, the lens cone of each lens is printed with QR code.

Relative illumination reaches up to above 90% when the F4 F-Stop is used more frequently by users.

Original high-resolution performance of Fujinon lens
"4D High Resolution"

Adopt the FUJIFILM's original mechanical structure design of "vibration-resistance and impact-resistance"

Support large sensor and realize compact outer diameter φ39㎜ at the same time

High convenience and reliability

Fujinon CF50ZA-1S

Focal length [mm] 50
Iris range (F. no) F2.4-F16
Angle of view 16.6°×12.5°
Working Distance*1(mm) ∞‐200
Operation of focus Manual
Operation of iris Manual
Filter thread [mm] M37.5 x 0.5
Mount C-mount
Weight (approx.) [g] 155
Sensor size(std.) 1.1"(2.5μm)
CRA (Chief Ray Angle) 4.8
TV distortion [%] -0.17
Dimension [mm] φ39×68

 1: From front of lens barrel



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.