FUMS-F Series Unmanaged Ethernet Switches 4- or 8- port, 10/100 Mbps, with and without FSFP Modules

The Pelco FUMS-F Series Ethernet 4- and 8-port unmanaged switches are designed to transmit and receive 10/100 Mbps data over optical fiber through user-selectable small form-factor pluggable (FSFP) options; or 10 Mbps or 100 Mbps data over Cat5e or Cat6 electrical cable. The electrical interface autonegotiates between 10 Mbps or 100 Mbps Ethernet rates without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate.

These units integrate four or eight independent 10/100 Mbps channels in a single package. The FUMS-FFX4TX4, FUMS-FFX2TX2, FUMS-FTX4, and FUMS-FFX8 require interchangeable FSFP modules (ordered separately) for specific fiber type, distance, and connectors.

Modular in design, the FUMS-F models may be either wall- or rack-mounted. LED indicators display operating status and critical operating parameters. These models are designed to operate in extreme environments. External power is required for the FUMS-F Series units. The units can be powered with the recommended FEXTPS fiber external power supply. The optical transmission of Ethernet-compatible IP camera surveillance video makes the FUMS -F Series ideal for transportation, airport, and college campus applications.

Available Configurations

FUMS-FFX8 Ethernet unmanaged switch, requires FSFP modules† , 100 Mbps, 8 FX optical ports

FUMS-FFX4TX4 Ethernet unmanaged switch, requires FSFP modules† , 10/100 Mbps, 4 TX electrical and 4 FX optical ports

FUMS-FTX8 Ethernet unmanaged switch, 10/100 Mbps, 8 TX electrical ports

FUMS-FFX4 Ethernet unmanaged switch, 100 Mbps, 4 FX optical ports

FUMS-FFX2TX2 Ethernet unmanaged switch, requires FSFP modules† , 10/100 Mbps, 2 TX electrical and 2 FX optical ports

FUMS-FTX4 Ethernet unmanaged switch, requires FSFP modules† , 10/100 Mbps, 4 TX electrical ports

RECOMMENDED ACCESSORIES

EURACK Rack-mount chassis for up to 14 fiber optic modules, internal power supply, European power cord

USRACK Rack-mount chassis for up to 14 fiber optic modules, internal power supply, North American power cord

FEXTPS Fiber external power supply with multiple plug adaptors (North American, Australian, United Kingdom, and European); 100 to 240 VAC, 50 to 60 Hz input, 9 VDC output

*These switches do not support Internet Group Management Protocol (IGMP) and should not be used as a core switch.

† Requires selection of interchangeable FSFP modules (must be ordered separately) for specific fiber type, distance, and connector. Refer to FSFP Series Transceivers specification sheet for model number and description of FSFP modules. Multimode fiber must meet or exceed fiber standard ITU-T G.651. Single-mode fiber must meet or exceed fiber standard ITU-T G.652.

10/100 Mbps Ethernet – 10Base-T/100Base-TX Electrical Port – 100Base-FX Optical Port

Electrical Port Supports Autonegotiation for 10 Mbps or 100 Mbps, Full-Duplex or Half-Duplex Data

Optical Port Supports 100 Mbps Full-Duplex Data

Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation

Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards

Uses Interchangeable Small Form-Factor Pluggable (FSFP) Modules for Specific Fiber Type, Distance, and Connector (Must Be Ordered Separately)

Voltage Transient Protection on All Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events

LED Status Indicators for Monitoring All Critical and Normal Operating Parameters

Hot-Swappable Rack Modules

Stand-Alone or Rack-Mountable Modular Design

Compliant with IEEE 802.3 Standards

ELECTRICAL

Power Input 9 to 24 VDC

Power Consumption

FUMS-FFX4, FUMS-FFX2TX2, FUMS-FTX4 12 W

FUMS-FFX8, FUMS-FFX4TX4, FUMS-FTX8 17 W

Cable Cat5e or Cat6

MTBF >100,000 hours

LED Indicators Optical link, data; Electrical link, data; Power

DATA

Data Interface Ethernet

Data Rate 10/100 Mbps, IEEE 802.3 compliant

Operating Mode Electrical port, full-duplex or half-duplex Optical port, full-duplex

OPTICAL

Data Rate 100 Mbps

Wavelength FSFP dependent†

Number of Fibers FSFP dependent†

MECHANICAL

Connectors

Optical FSFP dependent†

Power Terminal block

Electrical RJ-45

Number of Rack Slots

FUMS-FFX4, FUMS-FFX2TX2, FUMS-FTX4 1

FUMS-FFX8, FUMS-FFX4TX4, FUMS-FTX8 2

GENERAL

Dimensions

FUMS-FFX4, FUMS-FFX2TX2, FUMS-FTX4 15.5 × 13.5 × 2.8 cm (6.1" D × 5.3" W × 1.1" H)

FUMS-FFX8, FUMS-FFX4TX4, FUMS-FTX8 15.5 × 13.5 × 5.6 cm (6.1" D × 5.3" W × 2.2" H)

Operating Temperature –40° to 75°C (–40° to 167°F)

Storage Temperature –40° to 85°C (–40° to 185°F)

Relative Humidity 0 to 95%, noncondensing

Weight Unit <0.45 kg (1.00 lb) Shipping 0.90 kg (2.00 lb)

CERTIFICATIONS/RATINGS

CE, Class E

FCC, Part 15

UL Listed

C-Tick

IEEE 802.3

Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards

†Requires selection of interchangeable FSFP modules (must be ordered separately) for specific fiber type, distance, and connector. Refer to FSFP Series Transceivers specification sheet for model number and description of FSFP modules. Multimode fiber must meet or exceed fiber standard ITU-T G.651. Single-mode fiber must meet or exceed fiber standard ITU-T G.652.