Search

FUMS-G Series Unmanaged Ethernet Switches 4- or 8-PORT, 10/100/1000 Mbps, requiring FSFP Module

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The Pelco FUMS-G Series Ethernet 4- and 8-port unmanaged switches are designed to transmit and receive 10/100/1000BASE-T(X) or 1000FX data through user-selectable small form-factor pluggable (FSFP) transceivers (ordered separately). The plug-and-play design of these FSFP modules ensures ease of installation requiring no electrical or optical adjustments.

Modular in design, the FUMS-G models may be either wall- or rack-mounted. LED indicators display operating status and critical operating parameters. These models are designed to operate in extreme environments. External power is required for the FUMS-G Series units. The units can be powered with the recommended FEXTPS fiber external power supply. The optical transmission of Ethernet-compatible IP camera surveillance video makes the FUMS-G Series ideal for transportation, airport, and college campus applications.

Available Configurations*

FUMS-GFX4 Ethernet unmanaged switch, requires FSFP modules† , 1000 Mbps, 4 data ports

FUMS-GFX8 Ethernet unmanaged switch, requires FSFP modules† , 1000 Mbps, 8 data ports

RECOMMENDED ACCESSORIES

EURACK Rack-mount chassis for up to 14 fiber optic modules, internal power supply, European power cord

USRACK Rack-mount chassis for up to 14 fiber optic modules, internal power supply, North American power cord

FEXTPS Fiber external power supply with multiple plug adaptors (North American, Australian, United Kingdom, and European); 100 to 240 VAC, 50 to 60 Hz input, 9 VDC output

*These switches do not support Internet Group Management Protocol (IGMP) and should not be used as a core switch.

† Requires selection of interchangeable FSFP modules (must be ordered separately) for specific fiber type, distance, and connector. Refer to FSFP Series Transceivers specification sheet for model number and description of FSFP modules. Multimode fiber must meet or exceed fiber standard ITU-T G.651. Single-mode fiber must meet or exceed fiber standard ITU-T G.652.

10/100/1000 Mbps Ethernet

Electrical Port Supports Autonegotiation for 10/100/1000 Mbps, Full-Duplex or Half-Duplex Data

Optical Port Supports 1000 Mbps Full-Duplex Data

Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation

Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards

Uses Interchangeable Small Form-Factor Pluggable (FSFP) Modules for Specific Fiber Type, Distance, and Connector (Must Be Ordered Separately)

Voltage Transient Protection on All Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events

LED Status Indicators for Monitoring All Critical and Normal Operating Parameters

Hot-Swappable Rack Modules

Stand-Alone or Rack-Mountable Modular Design

Compliant with IEEE 802.3 Standards

ELECTRICAL

Power Input 9 to 24 VDC

Power Consumption

FUMS-GFX4 12 W

FUMS-GFX8 17 W

MTBF >100,000 hours

LED Indicators Optical link, data; Electrical link, data; Power

DATA

Data Interface Ethernet

Data Rate 10/100/1000 Mbps, IEEE 802.3 compliant Electrical port, full-duplex or half-duplex Optical port, full-duplex

Operating Mode FSFP dependent†

OPTICAL

Data Rate 1000 Mbps

Wavelength FSFP dependent†

Number of Fibers FSFP dependent†

MECHANICAL

Connectors

Optical FSFP dependent†

Power Terminal block

Data FSFP dependent†

Number of Rack Slots

FUMS-GFX4 1

FUMS-GFX8 2

GENERAL

Dimensions

FUMS-GFX4 15.5 × 13.5 × 2.8 cm (6.1" D × 5.3" W × 1.1" H)

FUMS-GFX8 15.5 × 13.5 × 5.6 cm (6.1" D × 5.3" W × 2.2" H)

Operating Temperature –40° to 75°C (–40° to 167°F)

Storage Temperature –40° to 85°C (–40° to 185°F)

Relative Humidity 0 to 95%, noncondensing

Weight Unit <0.45 kg (1.00 lb) Shipping 0.90 kg (2.00 lb)

CERTIFICATIONS/RATINGS

CE, Class E

FCC, Part 15

UL Listed

C-Tick

IEEE 802.3

Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards

† Requires selection of interchangeable FSFP modules (must be ordered separately) for specific fiber type, distance, and connector. Refer to FSFP Series Transceivers specification sheet for model number and description of FSFP modules. Multimode fiber must meet or exceed fiber standard ITU-T G.651. Single-mode fiber must meet or exceed fiber standard ITU-T G.652.



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.