Search

590 W Per Channel Remote Control Amplifier

Electro Voice - P1200RT View Larger Image (in new window)

Electro Voice : P1200RT

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]
The Electro-Voice P-1200RT High-impedance output for 100/70V-lines with 2 x 590 watts. The dynamic limiter circuit includes the output transformer and limits THD to 1% maximum. The P 1200RT Loudspeaker outputs on barrier strip.

Built for the toughest tours and high-profile installations, Precision series remote control amplifiers deliver superb concert sound in a rugged package that stands up to the rigors of the road. High-power Class-AB designs drive your boxes as hard as you need to get full, clear coverage. Ultra-low distortion keeps your sound clean even at peak volumes with heavy loads. And road-ready design features—dual power supplies, multiple fans, and complete electronic protection circuitry—keep the show going while safeguarding both your investment and your reputation.

Long a staple of top touring companies, Precision series amplifiers are better than ever with the inclusion of the RCM-24 module, which brings P series amps under IRISNet control with state-of-the-art DSP technology. Offering system supervision, signal routing, advanced FIR-Drive loudspeaker optimization, IIR filters, level control, and dynamics, Precision series remote control amplifiers set the standard for professional concert sound.

Performance and control for fixed installation
590 W per channel into 70/100 V line
Class-AB design
IRIS-Net enabled for remote control, monitoring, and DSP processing via included RCM-24 module
Eight recallable DSP/configuration presets
System check button for fast, complete test of all connected cables and loudspeaker components
Two GPI and two GPO ports
Parallel RJ-45 CAN bus connectors
Pilot tone detection for cable supervision
Connector Type Barrier strip
Continuous Rated Power (1 kHz, THD 1%) 100v 590 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v 580 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v 500 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v 500 Watts
Control Protocol CAN-Bus
Controls 2 x 0 V, 5V free configurable, Easy-Remote
Cooling Front-to-rear, three 4-stage fans
DIM 30 0.2/0.3 % 100V/70V
FIR-Drive No
Frequency Response 45 - 20,000 Hz -1 dB
Input Impedance (Balanced) 20 kΩ XLR Input
Input Sensitivity 1.55 V ( 6dBu)
Intermodulation Distortion (SMPTE) 0.1/0.3 % 100V/70V
Maximum Input Voltage 8.7 V 21 dBu
Network Control (IRIS-Net) Yes
Serial Interface Network: CAN, 2 RJ45 (CAT-5 Cabling), RS-232 for media control systems
Signal-to-Noise Ratio (A-weighted) 106 dB
Topology Class-AB
Total Harmonic Distortion 0.1/0.2 % 100V/70V
Height 3RU 132.5 mm (5.22")
Width 483 mm (19.02")
Depth 390 mm (15.35")
Weight Net 25 kg (55.12 lbs)



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.