Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 565-7845
Single Channel Video Passive Transceiver With Coax Pigtail

The NVT Single Channel Video Passive Transceiver with Coax Pigtail NV-214A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

This product is an improvement over NVTs popular NV-213A video transceiver. The passive NV-214A-M has a 9" mini-coax mini lead which allows in-camera enclosure mounting in most dome cameras and a greater number of mounting options in general at both ends of the system. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVTs passive products for applications under 750ft (225m). The NV-214A-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.

The unparalleled interference rejection and low emissions of the NV-214A-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.

NV-214A-M features include:

→ Full-motion CCTV video at distances up to 750ft (225m) when used with any passive NVT transceiver or hub
→ Up to 3,000ft (1km) with a NVT DigitalEQ hub or active receiver
→ Up to 1,500ft (460m) with a NVT StubEQ hub
→ Mini-coax pigtail supports in-camera mounting in most dome cameras
→ Reliable screwless UTP terminal connection
→ No power required
→ Exceptional interference rejection
→ Frequency Response DC to 10 MHz
→ Built-in transient protection
→ Supports “up-the-coax” type control signal up to 750ft (225m)
→ Limited lifetime warranty

Video Frequency response DC to 10 MHz
Attenuation 0.5 dB typ
Common-mode / Differential-mode rejection 15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, male BNC 75 ohms
Video Impedance , Screwless terminal block 100 ohms
Power No external power require
Ambient ambient temperature -22 to 167 °F (-30 to 75 °C)
Humidity (non-condensing ) 0 to 95%
Transient Immunity per ANSI / IEEE 587 C62.41
Network Wiring One Unshielded Twisted Pair 24-16 AWG (0,5-1,31mm)
Wire Category Type 2 or better
Wire Impedance 100 ± 20 ohms
Wire DC Loop Resistance 52 ohms per 1,000ft (18 ohms per 100m)
Wire Differential Capacitance 19 pF/ft max (62 pF/m max)
Body Length 1.8in (45mm)
Body Height 1.0in (26mm)
Body Width 9in (228mm)
Product Weight 2.0oz (60g)
Packaged Weight 0.14lb (63g)



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.