UTP Video Passive Transmitter 12VDC Converter

The NVT UTP Video Passive Transmitter 12VDC Converter NV-226J-PV Video Transmitter 12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VACto-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.

The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and low voltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals. The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant.
 

NV-226J-PV features include:

→ Video Frequency response DC to 10 MHz
→ Video Attenuation 0.5 dB typ
→ Extended distance camera power and video routed through UTP and RJ45
→ Supports 12VDC cameras with onboard regulated power
→ Use with NVT’s PVD TM Power Supply Hubs and Cable Integrators
→ Up to 3,000ft (1km) with a NVT DigitalEQ TM Hub or active receiver, (see Power Distance Chart)
→ Up to 1,500ft (460m) with a NVT StubEQ TM Hub
→ Frequency response DC to 10MHz (see Recommended Distance Chart)
→ Exceptional interference rejection
→ Built-in transient protection
→ Limited lifetime warranty