Imaging device |
1/2 type interline CCD |
Total pixels |
EIA: 811(H) x 508(V), CCIR: 795(H) x 596(V) |
Pixel size |
EIA: 8.4(H) X 9.8(V) µm, CCIR: 8.6(H) x 8.3(V) µm |
Effective pixels |
EIA: 768(H) x 494(V), CCIR: 752(H) x 582(V) |
Imaging area |
EIA: 6.45(H) x 4.84(V) mm, CCIR: 6.47(H) x 4.83(V) mm |
Video effective output pixels |
EIA: 752(H) x 485(V), CCIR: 738(H) x 575(V) |
Signal format |
Conforming to EIA or CCIR |
Scanning system |
2:1 interlaced |
Horizontal drive frequency |
EIA: 14.318 MHz, CCIR: 14.1875 MHz |
Horizontal scanning frequency |
EIA: 15.734 kHz, CCIR: 15.625 kHz |
Vertical scanning frequencies |
EIA: 59.94 Hz, CCIR: 50 Hz |
Sync system |
Interal/external, automatic selection |
External sync input |
HD and VD: 4Vp-p negative; Impedance: 75 Ohms; Frequency deviation: -1% |
Video output |
1.0 Vp-p 75 Ohmns unbalanced; Video Component: 0.7Vp-p; Sync component: 0.3Vp-p negative |
Resolution |
EIA: 570(H) x 485(V) TV lines; CCIR: 560(H) x 575(V) TV lines |
Sensitivity |
400lx, F4, 3200 K |
Minimum object illumination |
0.3lx, F1.4, AGC and gamma on, with out infrared cut filter |
Signal to noise ratio |
56dB |
Electronic shutter |
1/100(EIA), 1/120(CCIR), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 second. Selected by changing chip parts. Factory setting is off. |
Integration mode |
Field or frame (Factory setting is frame). Selected by changing chip parts. |
Gamma correction |
On or off(Factory setting is off). Selected by changing chip parts. |
Sensitivity selection |
Fixed gain or AGC(Factory setting is fix). Selected by changing chip parts. |
Power supply voltage |
12 -1 VDC |
Power consumption |
Approx. 160mA |
Ambient temperature and humidity |
Operating: -10 to 50°C RH less than 90%; Storage: -20 to 60°C RH less than 70% |
Dimensions |
45(W) x 45(H) x 20(L)mm |
Mass |
25g approx. |
Composition |
Black and white camera module: 1; Interface cable: 1 |
Note |
The standard accessory cable is 300mm signal conductor. Different length cable requires shielding to avoid external noise. |