The Hitachi 45601-C is 12VDC Power Supply that is compatible with Hitachi cameras

Power Supply Connectors also available:

45601-C1: 12VDC Power...

This item is DISCONTINUED.

The EverFocus IP Sidekick- ESK1000 helps eliminate the troubles one goes through when installi...

The Net GmbH IP-HUB-4X-USB3.0 is a USB 3.0 HUB, 4x USB 3.0 Port, includes power supply is an accessory for the 3icube USB 3.0 CMOS cameras

The Bosch KBD-120PS is an optional power supply unit for an IntuiKey series keyboard. It converts 120VAC to 12VDC and consists of a power supply unit and power cable.

The Bosch LTC 4637/60 RACK & POWER SUPPLY FOR FIBER OPTIC MODULES, 120VAC, 60HZ with Long distance–high security, Surface-mount or rack-mount units, and Data communication link ...

The Bosch LTC 8505/60 is a spare 120 VAC power supply for the Bosch Allegiant LTC850160 matrix switcher. It features an on/off switch, seven fuse alerts and one external sync LED.<...

This product has been discontinued. For an alternative, please contact [email protected]

The Bosch MIC-115P...

The Bosch MIC-24PSU-2 MIC Power Supply (24 VAC) provides all connections for power, telemetry and video for the MIC series range of PTZ cameras. This power supply ensure that MIC c...

This item is DISCONTINUED. Please contact [email protected] for a suitable alternative.

The Bosch MIC-IP-PS-...

The Bosch MIC-IPIR-PS-115 MIC IP-Enabled Power Supply Unit with integrated Bosch IP technology provides connections for power, telemetry, and video for the Bosch MIC550IR camera. ...

The Bosch MIC-IR-115PSU-UL Camera/IR Power Supply (115 VAC) drives the MIC series PTZ cameras and provides connections for power, telemetry, and video. You can install MIC cameras ...

The Bosch NPD-6001A Single-Port High PoE Midspan with AC Input is used for supplying power to network video products. It allows AUTODOME IP and HD cameras to be i...

The Net GmbH PS-A05C1-12MT-K is a Power Supply, 12 V, 0,8A assembled with 12 PIN Plug compatible for the GimaGO and the FOculus IEEE 1394 cameras

The Marshall Electronics V-PS12-5V-XLR is a 12 VDC 5A power supply with a female 4-Pin XLR connector for powering professional video equipment.

The Vicon V1000-UPS is desk mountable uninterruptible power supply (UPS) for use with Kollector Elite and Kollector Pro Recorders, VN-NVRs and Workstations. The V1000-UPS is a self...

The Bosch VJT-XACC-PS is a Wide-range PSU (Extended Temperature) is a power supply unit that can supply power in extended temperatures. It is used with the VideoJet X10/X20/X40 Rug...

Vitek VT-1205A-D4B 4 Output 12VDC Power Center w/Optional Backup Battery - 5 AMP - UL Listed

Vitek VT-1210A-D9B 9 Output 12VDC Power Center w/Optional Backup Battery - 10 AMP - UL Liste

Vitek VT-1230A-D18 18 Output 12VDC Power Center - 30 AMP - UL Listed

Vitek VT-2410A-A9 9 Output 24VAC Power Center - 10 AMP - UL Listed

Vitek VT-2415A-A18 18 Output 24VAC Power Center - 15 AMP - UL Listed

The Net GmbH ZY-CORSIGHT-M12-IO-POWER is a power supply 3 m in length and is used for the Corsight Smart Vision System.

The JVC AA-FP790G is a 12 VDC Base Station Power Supply for RM-FP790TNRG & RM-FP790TNCG is required to power the RM-FP790TNRG or RM-FP790TNCG fiber remote system used with your JV...

The Toshiba ACMW4012 is a medical approved 12VDC power adapter for use with the Ik-HD5UM medical grade camera.

Please inquire for more information!

The Toshiba ACY430A complies with the energy efficiency standards and is for use with the Ik-HD medical grade camera series.

The American Dynamics AD2010PS Power Supply Module (120VAC) is part of the MegaPower 3200 system, and is for use with the 120VAC AD2010R & AD2020R Switching Bays. It consists of a ...

The Altronix AL1012ULX is a power supply/charger that converts a 115VAC, 60Hz input into a single 12VDC non-power limited output.

Available Configurations In...

The Altronix AL300ULXD is a power supply/charger that converts a 115VAC 60Hz or 230VAC 60Hz input into a single 12VDC or 24VDC Class 2 Rated power limited output.

The Altronix AL400UL3 triple output power supply/charger is designed for use with access control systems and accessories. It converts a 115VAC / 60Hz input into three (3) individua...

The Altronix AL600ULXB is a UL Recognized power supply/charger that converts a 115VAC, 60Hz input into a single 12VDC or 24VDC non power-limited output.

Avai...

The Altronix ALTV2416600 AC Wall Mount CCTV Power Supply provides 24VAC or 28VAC distributed via Sixteen (16) fuse protected outputs for powering CCTV Cameras, heaters and other vi...

The Altronix ALTV2416600CB AC Wall Mount CCTV Power Supply provides 24VAC or 28VAC distributed via Sixteen (16) PTC protected outputs for powering CCTV Cameras, heaters and other v...

The Altronix ALTV2416ULI Isolated CCTV Power Supply provides 24VAC distributed via sixteen (16) isolated fuse protected power limited outputs for powering CCTV Cameras, heaters and...

The Altronix ALTV2432350 AC Wall Mount CCTV Power Supply provides 24VAC or 28VAC distributed via Thirty-Two (32) fuse protected outputs for powering CCTV Cameras, heaters and other...

The Altronix ALTV248300ULCB provides 24VAC or 28VAC distributed via Eight (8) Class 2 Rated PTC protected power limited outputs for powering CCTV Cameras, heaters and other video a...

The Altronix ALTV248600 AC Wall Mount CCTV Power Supply provides 24VAC or 28VAC distributed via Eight (8) fuse protected outputs for powering CCTV Cameras, heaters and other video ...

The Convergent Design CD-OD-AC-PS comes equipped with an international AC plug. It features a power connector for Odyssey 7/7Q OLED Monitor & Professional Recorder...

The CEN-UPS1250 is a 1250 Watt, 120 Volt uninterruptible power supply and power conditioner Engineered by APC® specifically for Crestron®. Designed to protect Crestron c...

The TV One CM-1RPS Redundant Power Supply Unit is a Factory or Tech Center that is Fitting Only for C2-8000 Switcher Series.

Available Configurations Include...

The Crestron CNPWS-75 is a 75 Watt, 24 Volt regulated power supply for powering Cresnet control systems and devices. Two 4-pin network connectors are provided, wired in parallel to...

The Crestron CSA-PWS40 is a wall-mounted power pack that provides power for a Crestron shade interface. It can also provide local power for one Crestron roller shade motor (certain...

The CSA-PWS450 is a 450 Watt power supply designed for use with Crestron shade motors. Power is supplied from 6 channels, each protected by a self resetting thermal fuse and a slow...

Power supply for the permanently installed FLIR D Series thermal security cameras.

A DM-MDA-PWS provides a hot-swappable backup replacement power supply for a Crestron® DM-MD64X64 or DM-MD128X128 DigitalMedia™ Switcher. The DM-MDA-64-PWS is th...

The DM-PSU-16-PLUS supplies power for up to sixteen PoDM, PoDM+, HDBaseT® PoE, or HDBaseT PoE+ powered devices. It is designed to install at the central switcher location, occupyi...

The DM-PSU-8-PLUS supplies power for up to eight PoDM, PoDM+, HDBaseT® PoE, or HDBaseT PoE+ powered devices. It is designed to install at the central switcher location, occupying ...

The EA24A12-P18 offer by i3 International is an economical power supply giving 24AC with 18 camera inputs. This power supplie has an input of 120 VAC. It is packaged in an easy-to-...

The EA12DB-P9 offer by i3 International is an economical power supplygiving 12VDC with 9 camera inputs. This power supplie has an input of 120 VAC. It is packaged in an easy-to-ins...

The 12 VDC and 48 VDC Power Supply Products are accessories that support the IP/analog fiber and EthernetConnect™ products. These accessories provide a range of options to provide power to fiber ...

The 14-slot USRACK Rack Chassis allows for module installation in a chassis that is rack mountable. The chassis contains an internal 9 VDC, 6.5 A power supply that provides power d...

The Tv One EXT-PS24U27A-HS is a 24VDC 27A 650W Hot Swappable Power Supply

POE + SUPPLY IEEE 802.3AT
Flir Thermal 
Model #: 4210755

The Altronix LPS3WP24 outdoor linear power supply/charger is specifically designed to provide the power needed by the most demanding security and access control applications. It co...

The NVT 16 Channel Power Supply Cable Passive Integrator Hub NV-16PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 16 cameras, a...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohmsVideo Impedance UTP, RJ45: 100 ohms
Network Wiring	One four-pair Cat5 or better per channel

The NVT 16 Channel Power Supply Passive Receiver Hub NV-16PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured buildi...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance , RJ45	100 ohms

The NVT 16-Channel Power Supply StubEQ Active Receiver Hub NV-16PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, RJ45	100 ohms

The NVT 32-Channel Power Supply StubEQ Active Receiver Hub NV-32PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, RJ45	100 ohms

The NVT 4 Channel Power Supply Cable Passive Integrator Hub NV-4PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 4 cameras, all ...

Camera Power	Each camera is powered by a fully isolated (floating) Class 2 SELV output, individually switchable 24VAC / OFF/ 28VAC at up to 1 Amp.
Power inlet	IEC with molded power cord (included)
Power Input On-off switch	Rear panel
Power Input Voltage	115 / 230 VAC
Power Input Current	1.25 / 0.625 Amps

The NVT 4 Channel Power Supply Passive Receiver Hub NV-4PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building...

Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, RJ45	100 ohms
Video Network Wiring	One four-pair Cat5 or better per channel
Camera Power	Fully isolated (floating) Class 2 SELV output, individually switchable 24VAC/OFF/28VAC at up to 1 Amp.

The NVT 8 Channel Power Supply Passive Receiver Hub NV-8PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building...

Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, RJ45	100 ohms
Video Network Wiring	One four-pair Cat5 or better per channel
Camera Power	Fully isolated (floating) Class 2 SELV output, individually switchable 24VAC/OFF/28VAC at up to 1 Amp.

The NVT 8-Channel Power Supply StubEQ Active Receiver Hub NV-8PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured bu...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance	Coax, female BNC 75 ohms
Video Impedance	UTP, RJ45 100 ohms

The Altronix OLS250 power supply/charger converts a 115VAC, 50/60Hz input into a 24VDC output @ 10 amp continuous supply current (see specifications). This unit has a wide range of...

The P2-105 Power Supply for C2 & S2 Modules from TV One is a special power unit designed for use with C2 and S2 series modules. Each C2 and S2 product comes with its own locking DC...

The Datavideo PD-4A is a Power Distributor with redundant power supply.

Also Available:

The PS−1DVI is a high−performance power supply for DVI cables. It provides 5V DC on pin 14 of the DVI plug for applications where power is not provided by the DVI source.

The Nitek PS4816W is a wall mounted 16 channel 48VDC Power Supply capable of providing up to 240 watts maximum divided over the 16 channels. Maximum output for any one channel is 3...

Input Voltage	Auto Switching 90 to 264 VAC
Output Voltage	48 VDC
Output Current	5.0 Amps
Output Power	240 Watts
Operating Temperature	-10 to 70C/ 14 to 158F

The PW-2420RU is a 2 Amp regulated power supply designed to provide 24 Volts DC to power some models of Crestron control systems and touchpanels. Generally, the PW-2420RU

The Crestron PW-5430DUS is an optional high-efficiency power pack that can be used with Crestron® DMB‑4K-I-C and DMB-4K-O-C blades and with Crestron DMPS3-4K-350-C and DM...

The Altronix Sav182D Power Supply provides 12VDC distributed via eighteen (18) Class 2 Rated PTC protected power limited outputs for powering surveillance cameras.

The Altronix SMP10C12X power supply/charger converts a 115VAC / 60Hz input into a regulated 12VDC output @ 10 amp continuous supply current.

Available Config...

The Altronix SMP7CTX power supply/charger converts a 115VAC / 60Hz input into a regulated 12VDC or 24VDC output @ 6 amp continuous supply current.

Available ...

The Analog Way SPU001 Redundant power supply module with battery backup for select LiveCore Series with Battery module provides approx. 10 minutes of power in case of mains loss, p...

The VA−100P is a 10−port 12V DC power supply. It replaces up to ten separate 12−volt adapters for Kramer TOOLS™ and other models that use 12V DC power adapters.

The VA−100P−5 is a 10−outlet universal switching power supply. It can supply 5V DC at up to 8A to power up to ten Kramer products that use an external 5V DC power supply.

The VA−50P is a 6−port 12V DC power supply. It replaces up to 6 separate 12 volt adapters for Kramer TOOLS™ and other models that use 12V DC power adapters.

The Altronix WayPoint17A Outdoor Power Supply provides 24VAC and/or 28VAC distributed via one or two output(s) for powering CCTV Cameras, heaters and other video accessories.

The Altronix WayPoint3 DC Outdoor Power Supply/Charger provides 12VDC or 24VDC and is designed to be conveniently located where power is required.

The Altronix WayPoint307A Outdoor Power Supply provides 24VAC and/or 28VAC distributed via two outputs for powering CCTV Cameras, heaters and other video accessories.

The Altronix WayPoint30A Outdoor Power Supply provides 24VAC and/or 28VAC distributed via one or two output(s) for powering CCTV Cameras, heaters and other video accessories.

The Altronix WayPoint5 DC Outdoor Power Supply/Charger provides 12VDC or 24VDC and is designed to be conveniently located where power is required.

The Altronix WayPoint7 DC Outdoor Power Supply/Charger provides 12VDC or 24VDC and is designed to be conveniently located where power is required.

The Altronix WPTV244175UL provides power via four (4) protected outputs for CCTV cameras, heaters, and other video accessories.

Available Configurations Incl...