The Nitek Video, Two Data Pairs & Power Surge Protector CAMPDD24 is a multi-function surge protector for in-line coaxial video, two twisted pairs of data and the 12 or 24 VAC camer...

Unit	Transceiver
Size	1.7"H x 4.3"W x 2.5"D
Power Requirements	None required
Connection Method	Video - BNC connectors; Power - Screw terminals; Control - Screw terminals; Data - Screw
Clamping Voltage	Video - 2.8V; Power - 33Vrms; Control - 4.7V

The Nitek Camera Video Surge Protector CAMPTR1 CCTV camera surge protector is a single channel, in-line, coaxial multi-stage video surge protector for analog cameras or head-end ap...

Unit	Transceiver
Size	1.5"H x 1.3"W x 0.8"D
Power Requirements	None required
Connection Method	Female BNC connectors
Clamping Voltage	2.8V

The Nitek Camera Video, Data and Power Surge Protector CAMPVC24 is a single channel, multi-function surge protector for in-line coaxial video, RS422 twisted pair and the 24 VAC cam...

Unit	Transceiver
Size	1.7"H x 4.3"W x 2.5"D
Power Requirements	None required
Connection Method	Video - BNC connectors; Power - Screw terminals; Control - Screw terminals
Clamping Voltage	Video - 2.8V; Power - 33Vrms; Control - 4.7V

The Nitek Camera Video, Data and Power Surge Protector CAMTRV24 is a single channel video balun transceiver used for UTP video transmission combined with a multi-function surge pro...

Unit	Transceiver
Size	1.7"H x 4.3"W x 2.5"D
Power Requirements	None required
Connection Method	Video - BNC & Screw Terminals, Power - Screw terminals, Control - Screw terminals
Clamping Voltage	Video - 2.8V, Power - 33Vrms, Control - 4.7V

The Nitek CAMUTP24 is a single channel, multi-function surge protector for unshielded twisted pair (UTP) video, RS422 twisted pair and the 24 VAC camera supply. The CAMUTP2...

Size	1.7"H x 4.3"W x 2.5"D
Power Requirements	None required
Connection Method	Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage	Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss	<0.2dB

The Nitek 16 Video, 2 Data Port Surge Protection DVRPTR16 is designed to provide multi-stage surge protection to the 16 video channels and the 2 or 4 wire data for P/T/Z systems. I...

Size	1RU
Connection Method	Standard female BNC video connectors, Standard data screw terminals
Clamping Voltage	2.8v
Insertion Loss	<0.2dB
Impedance	50 and 75 ohms

The Nitek IPCOAX1 is a single channel IP Camera and PoE plus Surge Protector with an independent protection circuit for 12 or 24V power, for applications where heater units or high...

Size	0.9" H x 2.5" W x 1.8" D
Power Requirements	None required
Network Connection Method	Standard female BNC connectors
Power Connection Method	Push-in terminals - rated at 5 amps
Clamping-Data/PoE Plus/Ethernet	58Vp-p

The Nitek IPCOAX16 is a sixteen channel IP Camera and PoE plus Surge Protector that provides excellent protection for ethernet devices and equipment. The IPCOAX16 ...

Size	2 RU
Power Requirements	None required
Network Connection Method	Standard female BNC connectors
Peak Pulse Power Dissipation	3,000 W/pair (10/100 microsecond)
Clamping-Data/PoE Plus/Ethernet	58Vp-p

The Nitek IP Camera and Power Surge Protector IPPTR12 IP Network Multi-Port Surge Protection Unit is designed to provide 12 ports of multi-stage network surge protection to protect...

Unit	Transceiver
Size	1RU
Connection Method	RJ45 connector (12 In - 12 Out)
Insertion Loss	<0.2dB
Impedance	50 and 75 ohms

The Nitek IP Camera and Power Surge Protector IPPWR1 is a single channel, in-line, IP camera and power surge protector for 10/100 network devices. The IPPWR1 netwo...

Unit	Surge Protector
Size	0.9" H x 2.5" W x 1.8" D
Power Requirements	None required
Network Connection Method	RJ45 jack connectors
Power Connection Method	Push-in terminals - rated to 8 amps

The Nitek IPPWR16 is a sixteen channel, rack mount, surge protector that provides data circuit protection for sixteen 10/100/1000 network devices. In addition to the network protec...

Size	0.9"2 RU
Power Requirements	None required
Network Connection Method	RJ45 jack connectors (16 In - 16 Out)
Peak Puls Power Dissipation	3,000 W/pair (10/100 micro second)
Clamping-Data/PoE Plus/Ethernet	58v (on all lines)

The Nitek IP Camera and Power Surge Protector UTPPTR4 multi-function in-line surge protector for fixed and twisted pair transmissions.

The UTPPTR4 i...

Size	1.7"H x 4.3"W x 2.5"D
Power Requirements	None required
Connection Method	Punchdown connectors
Clamping Voltage	15 Volts
Impedance	110 ohms