Search

ca-base-plate-3icube.jpg
Net GmbH: ca-base-plate-3icube

Base-plate for 3iCube incl. 4 screws M3 x 6mm

The Net GmbH CA-BASE-PLATE-3ICUBE is a Base-plate for 3iCube that includes 4 screws that are M3 x 6mm in size.   This accessory is used for the 3icube USB 3.0 CMOS

ca-base-plate-fos-b-c.jpg
Net GmbH: ca-base-plate-fos-b-c

Mounting Plate for FOculus S-series

The Net GmbH CA-BASE-PLATE-FOS-B/C is a mounting plate used for the FOculus IEEE 1394

ca-base-plate-fot-b-c.jpg
Net GmbH: ca-base-plate-fot-b-c

Mounting Plate for FOculus T-series

The Net GmbH CA-BASE-PLATE-FOT-B/C is a mounting plate for the FOculus IEEE 1394 T-Series


ca-base-plat-gimago.jpg
Net GmbH: ca-base-plat-gimago

Mounting Plate for GimaGO

The Net GmbH CA-BASE-PLATE-GIMAGO is a Mounting Plate for GimaGO cameras


ca-base-plate8600.jpg
Net GmbH: ca-base-plate8600

Base-plate for CS 86XX

The Net GmbH CA-BASE-PLATE8600 Base-plate for CS 86XX, is comaptible with the GimaGO easy GigE Vision

ca-icube-trigger-5m.jpg
Net GmbH: ca-icube-trigger-5m

iCube - Trigger, Strobe cable length 5m

The Net GmbH CA-ICUBE-TRIGGER-5M is an iCube - Trigger, Strobe cable length 5m. This accessory is compatible with the iCube USB2.0, 3iCube USB3.0 and

cbd-110.jpg
Orion: cbd-110

Indoor/Outdoor Ceilling Mount

The Orion Images CBD-110 Ceiling Mount is designed for use with CHDC-34DSDC HD Dome

cm-1.jpg
Orion: cm-1

Universal Metal Mount with 1 Extender

The Orion Images CM-1 Camera Universal Metal Mount is a universal camera mount that comes with   an

cm-2.jpg
Orion: cm-2

Universal Metal Mount with Cable Hole

The Orion Images CM-2 Camera Universal Metal Mount is a universal camera mount that comes with   a cable

cm3105ir.jpg
Orion: cm3105ir

3MP 3.0~10.5mm F1.4 Vari-Focal Lens, IR, DC Iris, CS Mount

The Orion Images CM3105IR CS Mount 3-10.5mm f/1.4 to Close DC-Iris Lens features an aperture range of 1.4 to close, which makes it suitable for both low as well as bright light...

cmb-100.jpg
Orion: cmb-100

Celiling Mount Bracket for CHDC-34DSDC Dome Camera

The Orion Images CMB-100 Corner Mount Bracket allows you to mount the CHDC-34DSDC Dome Camera on an outside corner, when using the WBD-110 Wall Mount together...

exmb.007b.jpg
Bosch: exmb-007b

HEAVY--DUTY WALL BRACKET, BLACK

The Bocsh EXMB.007B is a versatile heavy-duty wall bracket with a dual pin flat plate housing platform has bolt hole arrangements to suit many Extreme CCTV camera housing models....

exmb.029w.jpg
Bosch: exmb.029w

U BRACKET FOR EX30/80/82/REG-L1, WHITE

The Bosch EXMB.029W Ceiling Mount Bracket (White) is a U-type bracket designed for secure ceiling applications and allows pan/tilt adjustment for easy installations. Made of thick...

exsh.027b.jpg
Bosch: exsh.027b

SUNHOOD FOR EX27 (BLACK)

The Bosch EXSH.027B Sunhood (Black) is suitable for use with EX27 All-weather Cameras. It protects the imager from sunrays or other light sources to prevent lens glare and flare,...

hac-ipccc.jpg
Bosch: hac-ipccc

IP CAMERA COOLING CASE

The Bosch HACIPCCC Camera Cooling Case is a lightweight (0.4 lbs) unit mounted on the Dinon IP camera and when coupled with the HSG/UHO housing with an optional blower reduces the...

hac-tamp01.jpg
Bosch: hac-tamp01

TAMPER SWITCH KIT FOR HSG AND UHO SERIES HOUSINGS

The Bosch HAC-TAMP01 Tamper Switch Kit for HSG and UHO Series Housings is built with Strong aluminum construction and Protects camera/lens combinations up to 262  mm (10.32...

ip-expresscard-2x-usb3.0.jpg
Net GmbH: ip-expresscard-2x-usb3.0

USB 3.0 Card, Express Card, 2x USB 3.0 Port for Notebook

The Net GmbH accessory IP-EXPRESSCARD-2X-USB3.0 is a USB 3.0 Card, Express Card, 2x USB 3.0 Port for Notebook that is used for the 3icube USB 3.0 CMOS

ip-ohci-card-1.jpg
Net GmbH: ip-ochi-card-1

IEEE1394 Card for PC + Apple, 3 Ports extern

The Net GmbH IP-OHCI-CARD-1 is an IEEE1394 Card for PC + Apple, 3 Ports extern, Texas Instruments Chip, PCI, plug & play (only

ip-pci-express-2x-usb3.0.jpg
Net GmbH: ip-pci-express-2x-usb3.0

USB3.0 Card, PCI Express, 2x USB3.0 Port

The Net GmbH IP-PCI-EXPRESS-2X-USB3.0 USB3.0 Card, PCI Express, 2x USB3.0 Port is compatible with the 3icube USB 3.0 CMOS

ltc-8059-00.jpg
Bosch: ltc-8059-00

ALLEGIANT MASTER CONTROL SOFTWARE PACKAGE, WINDOWS 95/NT-BASED

The Bosch LTC 8059/00 is a software program designed to give a security administrator complete control over an Allegiant system from a Windows based PC. With the master control...

ltc-8511-00.jpg
Bosch: ltc-8511-00

SPARE CPU MODULE FOR LTC 8501 BAY

The Bosch  LTC 8511/00 Allegiant accessory products provide many optional features to the base Allegiant Video Switcher/Control System. Various accessory products are available,...

ltc-8521-00.jpg
Bosch: ltc-8521-00

VIDEO INPUT MODULE FOR LTC 8500, 8 VIDEO INPUTS PER CARD

The Bosch LTC 8521/00 is an 8-port video input module for use with the Bosch LTC8500 series matrix switcher. Up to 8 input modules can be used in a single switcher for a total of...

ltc-8532-00.jpg
Bosch: ltc-8532-00

2-Port Video Output Module for 8500 Series Switching Bay

The Bosch LTC 8532/00 is a 2-port video output module for use with the Bosch LTC8500 matrix switching bay. Up to 4 modules can be used with a single bay for a...

ltc-8540-00.jpg
Bosch: ltc-8540-00

Alarm Interface Unit with 64 Inputs

The Bosch LTC 8540/00 is an alarm interface unit designed to activate an Allegiant system's video display automatically and sound a buzzer, in the event of an alarm. The unit...

ltc-8568-00.jpg
Bosch: ltc-8568-00

SIGNAL DISTRIBUTION UNIT, 32 SEPARATE BIPHASE OUTPUTS

The Bosch LTC 8568/00 is a main site bi-phase control code distribution and line unit for communicating with receivers, drivers, switcher, followers and satellite systems. It...

ltc-8569-60.jpg
Bosch: ltc-8569-60

Biphase Code Merger with 2 Inputs and 32 Outputs - 120 VAC

The Bosch LTC 8569/60 is a code merger and line driver designed to combine biphase control code from multiple systems. Any Bosch unit capable of generating a biphase signal can be...

ltc-8621-00.jpg
Bosch: ltc-8621-00

16-Port Video Input Module for Allegiant 8600 Series Switcher

The Bosch LTC 8621/00 is a 16-port input module for use with Bosch Allegiant 8600 CPU switcher bay. Up to 8 boards can be installed in one switcher for a total of 128 camera...

ltc-8712-60.jpg
Bosch: ltc-8712-60

Allegiant Console 4 Port Expander - 120 VAC

The Bosch LTC 8712/60 is a console port expander designed to allow the connection of four additional external computing devices to communicate with an Allegiant system via an...

ltc-8713-60.jpg
Bosch: ltc-8713-60

ALARM PORT EXPANDER FOR UP TO 4 LTC 8540/00 UNITS, HALF RACK, 120VAC, 60HZ

The Bosch LTC 8713/60 is an Alarm Port Expander designed to allow the connection of up to four LTC8540/00 Alarm Interface Units with an Allegiant system, providing the capability...

ltc-8715-60.jpg
Bosch: ltc-8715-60

PORT EXPANDER FOR MULTIPLE LTC 8714/60 UNITS, HALF RACK, 120VAC, 60HZ

The Bosch LTC 8715/60 is a port expander designed to interface up to four LTC 8714 keyboard port expanders with an Allegiant system switcher. Multiple LTC 8715/60 units can be...

ltc-8768-00.jpg
Bosch: ltc-8768-00

SIGNAL DISTRIBUTION UNIT, 64 SEPARATE BIPHASE OUTPUTS

The Bosch LTC 8768/00 is a main site bi-phase control code distribution and line unit for communicating with receivers, drivers, switcher, followers and satellite systems. It...

ltc-8821-00.jpg
Bosch: ltc-8821-00

32-Port Video Input Module for 8800 Series Matrix Switcher

The Bosch LTC 8821/00 is a 32-port video input module for use with the Bosch Allegiant 8800 matrix switcher. Up to eight of these boards can be used in a single switcher for a...

ltc-8834-00.jpg
Bosch: ltc-8834-00

4-Port Video Output Module for 8800 Series Matrix Switcher

The Bosch LTC 8834/00 is a 4-port video output module for the Bosch Allegiant 8800 matrix switcher. Up to eight modules can be installed in one switcher for a total of 32 monitor...

8 input alarm and washer pump card for mic400 psu.jpg
Bosch: mic-alm

8 INPUT ALARM AND WASHER PUMP CARD FOR MIC400 PSU

The Bosch MIC-ALM is an 8 input alarm and washer pump card that is compatible with the MIC400

mic-cmb.jpg
Bosch: mic-cmb

CORNER MOUNT BRACKET -BLACK

The Bosch MIC-CMB corner mount black bracket is is compatible with that MIC 400, 412, and 440 cameras

 

Available Configurations...

mic-dca.jpg
Bosch: mic-dca

DEEP CONDUIT ADAPTER FOR 4" PCD BASE - BLACK

The Bosch MIC-DCA Deep Conduit Adaptor is used to fit the foot of a MIC camera to the weatherproof conduit of its wall mount bracket, and protects the MIC composite cable. Made of...

mic-pmb.jpg
Bosch: mic-pmb

POLE MOUNT BRACKET

The Bosch MIC-PMB Pole Mount Bracket allows you to mount the MIC cameras on various locations such as on lamp posts, scaffolding, and other...

mic-sca.jpg
Bosch: mic-sca

SHALLOW CONDUIT ADAPTER FOR 4" PCD BASE

The Bosch  MIC-SCA Shallow Conduit Adaptor allows you to mount the MIC Series cameras at various locations such as on lamp posts, scaffolding, and other nonstandard mounting...

mic-wkt.jpg
Bosch: mic-wkt

MIC WASHER KIT FOR NON INFRARED MODELS

The Bosch MIC-WKT MIC WASHER KIT FOR NON INFRARED MODELS with Full range of mounting brackets and other accessories and Provides a best-fit solution for virtually any...

mic-wmb-b.jpg
Bosch: mic-wmb-b

WALL MOUNT BRACKET

The Bosch MIC-WMB-B WALL MOUNT BRACKET is compatible with the MIC 400, 412, 440 cameras.   It provides a best-fit solution for virtually any application and is easy to use and...

npd-6001a.jpg
Bosch: npd-6001a

MIDSPAN, SINGLE PORT, 60W, AC IN

The Bosch NPD-6001A Single-Port High PoE Midspan  with AC Input is used for supplying power to network video products. It allows AUTODOME IP and HD cameras to be...

pmb-100.jpg
Orion: pmb-100

Pole Mount Bracket for CHDC-34DSDC Dome Camera

The Orion Images PMB-100 Pole Mount Bracket allows you to mount the CHDC-34DSDC Dome Camera on a pole, when using the WBD-110 Wall Mount together with

vg4-mtrn-e1.jpg
Bosch: vg4-mtrn-e1

AUTODOME MODULAR (G4) H.264 ETHERNET COMMUNICATIONS MODULE

The Bosch VG4-MTRN-E1 AutoDome TCP/IP Communications Module (H.264) can be used to add network connectivity to any AutoDome 100, 200, 300 or 500i Series Cameras to deliver true...

vg4-sfpsckt.jpg
Bosch: vg4-sfpsckt

ETHERNET TO SFP INTERFACE KIT FOR AUTODOME IP AND MIC IP SERIES

The Bosch VG4-SFPSCKT ETHERNET TO SFP INTERFACE KIT FOR AUTODOME IP AND MIC IP SERIES with Interchangeable Central Processing Unit (CPU), Camera, Housing and Communications...

vg4-shtr-xt.jpg
Bosch: vg4-shtr-xt

AUTODOME MODULAR (G4) HEATER MODULE EXTENDED TEMPERATURE RANGE

The Bosch VG4-SHTR-XT Heating Module is an extended temperature heater module that extends the operating temperature to -76 °F (-60 °C), allowing the AutoDome...

vt-av-cmt.jpg
Vitek: vt-av-cmt

Heavy Duty Alpha Series Dome Camera Ceiling Mount

The Vitek VT-AV/CMT heavy duty alpha series dome camera ceiling mount is Compatible with the ALPHA Series Vandal Resistant Dome

 

Also Available:...

no-image.jpg
Orion: wbd-110

Indoor Wall Mount for CHDC-34DSDC Dome Camera

The Orion WBD-110 is an Indoor Wall Mount for the CHDC-34DSDC Dome Camera


zy-fos-trigger-3m.jpg
Net GmbH: zy-fos-trigger-3m

Trigger, Strobe, Power cable, length 3m

The Net GmbH ZY-FOS-TRIGGER-3M is a Trigger, Strobe, and Power cable that is 3m in length. This accessory is compatible with the FOculus IEEE 1394

zy-fot-trigger-3m.jpg
Net GmbH: zy-fot-trigger-3m

Trigger, Strobe, Power cable, length 3m

The Net GmbH ZY-FOT-TRIGGER-3M is an Trigger, Strobe, and   Power cable that is 3m in length. This accessory is compatible with the FOculus IEEE 1394 T

zy-ge-trigger-5m.jpg
Net GmbH: zy-ge-trigger-5m

GimaGO easy - Trigger, Strobe, Power cable, length 5m

The Net GmbH ZY-GE-TRIGGER-5M GimaGO easy - Trigger, Strobe, Power cable, length 5m in size.   It is compatible with the GimaGO easy GigE Vision

zy-go-trigger-3m.jpg
Net GmbH: zy-go-trigger-3m

GimaGO - Trigger, Strobe, Power cable, length 3m

The Net GmbH ZY-GO-TRIGGER-3M is used for the GimaGO - it is a Trigger, Strobe, and Power cable that is 3m in

zy-go-trigger-5m.jpg
Net GmbH: zy-go-trigger-5m

GimaGO - Trigger, Strobe, Power cable, length 5m

The Net GmbH ZY-GO-TRIGGER-5M is an acceessory for the GimaGO. It is a Trigger, Strobe, and Power cable that is 5m in

zy-go-trigger-7m.jpg
Net GmbH: zy-go-trigger-7m

GimaGO - Trigger, Strobe, Power cable, length 7m

The Net GmbH ZY-GO-TRIGGER-7M is an accessory for the GimaGO. It is a Trigger, Strobe, and Power cable that is 7m in

zy-icube-trigger-tc-5m.jpg
Net GmbH: zy-icube-trigger-tc-5m

iCube - Trigger, Strobe cable length 5m

The Net GmbH ZY-ICUBE-TRIGGER-TC-5M is an iCube - Trigger, Strobe cable length 5m, trailer chain. This accessory can be used for the iCube USB2.0, 3iCube USB3.0 and

ah75w.jpg
COP USA: ah75w

Intelligent Pan & Tilt Scanner for AH75WP or AHWP

The COP USA AH75W is a ID Switchable 10 Built In Protocols (including Pelco D) Controlls AH75W for Motorized Zoom

...

as20.jpg
COP USA: as20

Indoor Standard Pan-Tilt Turning Device

The COP USA  AS20 is a Indoor Standard Pan-Tilt Turning Device AVAILABLE in 110 Volt and 24 Volt used for the PTZ

as20rs485.jpg
COP USA: as20rs485

Indoor/Outdoor Pan/Tilt RS485 Device (AC24V)

The COP USA AS20RS485 Indoor/Outdoor Pan/Tilt RS485 Device (AC24V) is compatible with the COP USA's PTZ Cameras        

as20w.jpg
COP USA: as20w

Outdoor Standard Pan and Tilt Device

The COP USA AS20W Outdoor Standard Pan and Tilt Device AVAILABLE in 24 Volt and 110 Volt is compatible with the COP USA's PTZ cameras

 

Available...

no-image.jpg
AVUE: br-25

Wall mount for G25 mini PTZ

The AVUE BR-25 is a wall mount that in compatible with the G25 mini PTZ camera


bw-1.jpg
AVUE: bw-1

Outdoor ceiling Mount without dome holder

The AVUE BW-1 is a outdoor ceiling mount that does not come with a dome holder


no-image.jpg
AVUE: bw-2

Outdoor wall Mount without dome holder

The AVUE BW-2 is an outdoor wall mount that does not come with a dome holder.


ca-up600.jpg
JVC: ca-up600

Wireless Mic Receiver Bracket

The CA-UP600 Wireless Mic Receiver Bracket from JVC attaches to the right rear of the GY-HM600/650, and provides a secure attachment point for a wireless microphone receiver. The...

cb600pc.jpg
JVC: cb600pc

Wheeled Watertight Case for GY-HM600/650 ProHD Camcorders

The JVC CB600PC is a watertight hard-shell carrying case specifically designed by Pelican Cases for the GY-HM600U/650U ProHD camcorders. A special foam insert has been shaped to...

cd-ssd-256gb.jpg
Convergent Design: cd-ssd-256gb

256GB SSD for Odyssey7 and 7Q

The Convergent Design CD-SSD-256GB is a solid state server-grade drive with built-in power protection. This solid state drive’s dual-drive...

cd-ssd-512gb.jpg
Convergent Design: cd-ssd-512gb

512GB SSD for Odyssey7 and 7Q

The Convergent Design CD-SSD-512GB is a solid state server-grade drive with built-in power protection. This solid state drive’s dual-drive architecture makes...

cd-ssd-usb3.jpg
Convergent Design: cd-ssd-usb3

USB3 to SSD (SATA 2.0) Adapter for data transfer (6GHz)

The Convergent Design CD-SSD-USB3 Data Transfer Adapter allows you to copy data from your SSD to a computer or external storage system via USB 3.0 connection. The...

ce-setup.jpg
Vicon: ce-setup

IP Camera Set-up and POE Tester

The CE-SETUP provides a simple way to setup and focus PoE-powered IP cameras and is an ideal tool for installers working with both CCTV and IT PoE-based systems. The...

ctc-hm100ssc.jpg
JVC: ctc-hm100ssc

Hard Shipping Case

The JVC CTC-HM100SSC Hard Shipping Case (Black) is a tough camera shipping case that has been custom engineered by Thermodyne to fit a JVC GY-HM100U Pro HD camcorder and...

i3d702.jpg
I3 International: i3d702

Pendant Pipe Mount

Consider mounting the i3D700-series Vandal Resistant Speed Dome camera to the ceiling with the i3D702 Pendant pipe mount bracket. Featuring cast aluminium & steel construction,...

i3d703.jpg
I3 International: i3d703

Simple Wall mount

Mount your i3D700-series Vandal Resistant Speed Dome camera from any wall using i3D703 wall mount bracket. Designed to make installations faster, the i3D703...

i3d704.jpg
I3 International: i3d704

Goose Wall Mount with Power Box

When mounting the i3S700-series speed dome from a perpendicular wall, the i3D704 is the right part for the job. The i3D704 is rust-proof; it is made from steel...

i3d705.jpg
I3 International: i3d7025

Pendant Pipe Mount w Power Box

When mounting the i3S700-series speed dome on the ceiling, the i3D705 is perfect for the job. The i3D705 is designed to suspend the i3S700-series speed dome in a...

i3d706.jpg
I3 International: i3d706

Parapet Mount Bracket

The i3D760 will give the i3S730 a great view when mounting off a straight wall. It is a bonus when operator can view hidden corners that before other bracket cannot do. It is easy...

i3d710.jpg
I3 International: i3d710

Sun Sheild for Vandal Outdoor Housing

The i3D710 is designed to reflect the sun rays from the camera dome and ensure that the camera provides the best picture in any weather condition. The i3D710...

ik-9480mt9212.jpg
Ikegami: ik-9480mt9212

10.9" Housing & Wall Mount for PAC-OD

The Ikegami IK-9480MT9212 10.9" Housing/Wall Mount for PAC-OD is easy to install and complements any environment. It features an aigis mechtronics HS9480 Housing and an aigis...

ik-9480mt9750.jpg
Ikegami: ik-9480mt9750

10.9" Housing & Wall Mount for PAC-OD2

The Ikegami IK-9480MT9750 10.9" Housing/Wall Mount for PAC-OD2 is easy to install and complements any environment. It features an aigis mechtronics HS9480 Housing and an aigis...

ik-dsb-pwmvcn-cg.jpg
Ikegami: ik-dsb-pwmvcn-cg

Wall Mount 170x155x250mm Aluminum Construction

The Ikegami IK-DSB-PWMVCN-CG can be used to sturdily mount an Ikegami ISD-A31 vandal resistant dome camera suspended from a ceiling.

 

Also...

ik-hs9483ss.jpg
Ikegami: ik-hs9483ss

Sun Shade for PAC- ODH & PAC- OD2H

The Ikegami IK-HS9483SS Sun Shade is an optional accessory for PAC-509 ODH and PAC-509 OD2H cameras. It protects the camera from direct sunlight and reduces the internal...

ik-vcnb-320cb.jpg
Ikegami: ik-vcnb-320cb

Pendant Mount 150x500mm, Aluminum Construction

The Ikegami IK-VCNB-320CB can be used to sturdily mount an Ikegami ISD-A31 vandal resistant dome camera suspended from a

no-image.jpg
Shany: mtb-413

Wall Mount Bracket

The Shany MTB-413 Wall Mount Bracket is an accessory used for Vadalproof Dome Series

no-image.jpg
Shany: mtb-504

Ceiling Mount Bracket

The Shany MTB-504 Ceiling Mount Bracket is a camera accessory used for the Vandalproof Dome Series

no-image.jpg
Shany: mtb-901a

Indoor/Outdoor 20cm Ceiling Mount Bracket

The Shany MTB-901A Indoor/Outdoor 20cm Ceiling Mount Bracket is used for 82-91 series


no-image.jpg
Shany: mtb-901b

Indoor/Outdoor 100cm Ceiling Mount Bracket

The Shany MTB-901B Indoor/Outdoor Ceiling Mount Bracket is 100cm in siza and is used for the 82/91

no-image.jpg
Shany: mtb-902

Indoor/Outdoor Wall Mount Bracket

The Shany MTB-902 camera accesory is an Indoor/Outdoor Wall Mount Bracket used for the 82/91

no-image.jpg
Shany: mtb-904

Indoor/Outdoor Pole Mount

The Shany MTB-904 Indoor/Outdoor Pole Mount is a camera accssory used for the 82/91

no-image.jpg
Shany: mtb-905

Indoor/Outdoor Corner Mount

The Shany MTB-905 is an Indoor and Outdoor Corner Mount Camera Accessory used for the 82/91

pism5v.jpg
Panasonic: pism5v

INDOOR VANDAL-RESIS.DOME HSG., SURF.MNT,F/NS202A,NF302,NF284

The Panasonic PISM5V Vandal Resistant Camera with 768H CCD, True Day/Night 2.8-10mm Super Dynamic Range, Adaptive Black Stretch and i-VMD. This dome is compatible with WV-NS202A,...

rhiuth.jpg
American Dynamics: rhiuth

Dome housing, indoor, SDU, Top Hat with deluxe trim ring, plenum rated

The RHIUTH  Metal enclosure houses the domes, and include trim ring and plastic base. This housing mounts directly to a ceiling or indoor structure and is plenum...

v-lcd4-pro-l-kit.jpg
Marshall Electronics: v-lcd4-pro-l-kit

V-LCD4-PRO with Battery Pack and Case

This Marshall Electronics  V-LCD4-PRO-L-KIT 4"LCD kit includes monitor (V-LCD4-PRO-L), battery pack (V-BP12-LCD) and FREE carrying case. The V-LCD4Pro-L-CASE is ideal for field...

v-pl-hitemp-slr-adaptor.jpg
Marshall Electronics: v-pl-hitemp-slr-adaptor

HiTemp CS-mt to SLR Camera Adaptor

The Marshall Electronics V-PL-HITEMP SLR ADAPTOR  HiTemp CS-mt to SLR Camera Adaptor Converts most Cannon, Nikon SLR camera models to 600mm long CS-Mount High Temperature Pinhole...

v-ps12-5v.jpg
Marshall Electronics: v-ps12-5v

12V 5 Amp Barrel Plug Power Supply for IP Cameras

The Marshall Electronics V-PS12-5V-XLR is a 12 VDC 5A power supply with a female 4-Pin XLR connector for powering professional video

vms-128.jpg
Marshall Electronics: vms-128

128 Channel Network Video Management and Recording Software

The Marshall Electronics VMS-128 VMS is a powerful IP Video Surveillance Software Package providing rich features and ease of operation. VMS offers live monitoring and recording...

vms-36.jpg
Marshall Electronics: vms-36

36 Channel Network Video Management and Recording Software

The Marshall Electronics  VMS-36 VMS is a powerful IP Video Surveillance Software Package providing rich features and ease of operation. VMS offers live monitoring and recording...

vms-64.jpg
Marshall Electronics: vms-64

64 Channel Network Video Management and Recording Software

The Marshall Electronics VMS-64 VMS is a powerful IP Video Surveillance Software Package providing rich features and ease of operation. VMS offers live monitoring and recording of...

vs-b370-10w.jpg
Marshall Electronics: vs-b370-10w

Wall Mount Bracket (Indoor / Outdoor use for VS-370-X10)

The Marshall Electronics VS-B370-10W is a Wall Mount Bracket used for indoors and outdoors.   This accessory is compatible with the Marshall Electronics

vs-hae.jpg
Marshall Electronics: vs-hae

HDMI Audio Extractor

The Marshall Electronics VS-HAE HDMI Audio Extractor is a device that allows you to extract audio signals from your HDMI source. When connecting with a TV or display you don't...

vs-hai.jpg
Marshall Electronics: vs-hai

HDMI Audio Inserter

The Marshall Electronics VS-HAI HDMI Audio Inserter is a device that lets you insert external audio into your HDMI/DVI source. The device allows you to insert stereo and...

vs-lsc.jpg
Marshall Electronics: vs-lsc

Lip Sync Corrector

The Marshall Electronics VS-LSC Stereo Lip SYNC Corrector is a compact device that corrects audio delay between audio and video. When distributing video over long distances...

vs-m246a.jpg
Marshall Electronics: vs-m246a

2.4~6mm F1.4 varifocal CS mount lens for VS Series CS Mount Box Cameras

The Marshall Electronics VS-M246A Varifocal lenses permit users to change the effective focal length (EFL) and the horizontal angle of view. This flexibility allows camera...

vs-p1000v.jpg
Marshall Electronics: vs-p1000v

POE In-Line Injector. For use with VS-370, 570, 571, 572 Dome Cameras

The Marshall Electronics VS-P1000V PoE+ injectors are for use with the VS-370, VS-570, VS-571, and VS-572 PTZ Dome cameras. This allows both IP Ethernet and camera power to be...

wat-ad901.jpg
Watec: wat-ad901

Watec Power Supply
The Watec WAT-AD901 is a power supply with plug that has DC 12V and 250mA.

SUPPORTED DEVICES:

Input voltate    AC120V 60Hz
Output voltage    DC12V
Output current    Max. 250mA
Connector    EIAJ-2 (Outside diameter: Ø5.5mm, Inside diameter: 2.1mm)
Safety Standard    UL/CUL
no-image.jpg
Ikegami: xhg-3329

Ceiling Mount Adaptor

The Ikegami XHG-3329 Indoor Ceiling Mount is designed for mounting the ISD-A33 Hyper Wide Light Dynamic Dome Camera on to the ceiling.

 

Also Available:...



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.