Search

expb-3-w-kit.jpg
Bosch: expb-3-w-kit

IR ILLUMINATOR BRACKET KIT + HOUSING

The Bosch EXPB-3W-KIT Camera and IR Illuminator Wall-mount Kit includes a pan/tilt adjustable camera housing and is suitable for use with AEGIS UFLED and AEGIS SuperLED...

hwb1-28c1.jpg
Ganz: hwb1-28c1

iPak Housing HWB-1 with ZN-C1 VGA PixelPro Camera & T4Z2813CS-IR (2.8-12mm IR manual iris lens)

The Ganz iPak Kit  HWB1-28C1 includes a housing and wall bracket with a pre-assembled GANZ ® camera and computar ® lens. iPak Kits can be ordered with a variety of camera and...

hwb1-38c1m.jpg
Ganz: hwb1-38c1m

iPak Housing HWB-1 with ZN-C1M 720p PixelPro Camera

The Ganz HWB1-38C1M iPak Housing HWB-1 with ZN-C1M 720p PixelPro Camera & T3Z0312FCS-MPIR (3-8mm Megapixel IR manual iris lens) with Pre-wired power & ethernet cables included,...

hwb1-38c2m.jpg
Ganz: hwb1-38c2m

iPak Housing HWB-1 with ZN-C1M 1080p PixelPro Camera & T3Z0312FCS-MPIR

The Ganz HWB1-38C2M  iPak Housing HWB-1 with ZN-C1M 1080p PixelPro Camera & T3Z0312FCS-MPIR (3-8mm Megapixel IR manual iris lens) with   Pre-wired power & ethernet cables...

hwb1-413c1m.jpg
Ganz: hwb1-413c1m

iPak Housing HWB-1 with ZN-C1M 720p PixelPro Camera & H3Z4518CS-MPIR

The Ganz HWB1-413C1M iPak Housing HWB-1 with ZN-C1M 720p PixelPro Camera & H3Z4518CS-MPIR (4.5-13.2mm Megapixel IR manual iris lens) with Minimal set-up reduces installation time,...

hwb1-413c2m.jpg
Ganz: hwb1-413c2m

iPak Housing HWB-1 with ZN-C2M 1080p PixelPro Camera & H3Z4518CS-MPIR

The Ganz HWB1-413C2M iPak Housing HWB-1 with ZN-C2M 1080p PixelPro Camera & H3Z4518CS-MPIR (4.5-13.2mm Megapixel IR manual iris lens) with Minimal set-up reduces installation...

hwb2-1236c1m.jpg
Ganz: hwb2-1236c1m

iPak Housing HWB-2 with ZN-C1M 720p PixelPro Camera & M3Z1228C-MP

The Ganz HWB2-1236C1M   iPak Housing HWB-2 with ZN-C1M 720p PixelPro Camera & M3Z1228C-MP (12-36mm Megapixel manual iris lens) with IP65 rated aluminum housing suitable for all...

hwb2-1236c2m.jpg
Ganz: hwb2-1236c2m

iPak Housing HWB-2 with ZN-C2M 1080p PixelPro Camera & M3Z1228C-MP

The Ganz HWB2-1236C2M iPak Housing HWB-2 with ZN-C2M 1080p PixelPro Camera & M3Z1228C-MP (12-36mm Megapixel manual iris lens) with Multiple mounting options available and IP65...

hwb2-28ac1.jpg
Ganz: hwb2-28ac1

iPak Housing HWB-2 with ZN-C1 VGA PixelPro Camera & TG4Z2813FCS-IR

The Ganz HWB2-28AC1 iPak Housing HWB-2 with ZN-C1 VGA PixelPro Camera & TG4Z2813FCS-IR (2.8-12mm IR auto iris lens) with Feed-through mounting bracket conceals cables, Multiple...

hwb2-38ac1m.jpg
Ganz: hwb2-38ac1m

iPak Housing HWB-2 with ZN-C1M 720p PixelPro Camera & TG3Z0312FCS-MPIR

The Ganz HWB2-38AC1M iPak Housing HWB-2 with ZN-C1M 720p PixelPro Camera & TG3Z0312FCS-MPIR (3-8mm Megapixel IR auto iris lens) with Minimal set-up reduces installation time and...

hwb2-38ac2m.jpg
Ganz: hwb2-38ac2m

iPak Housing HWB-2 with ZN-C2M 1080p PixelPro Camera & TG3Z0312FCS-MPIR

The Ganz HWB2-38AC2M iPak Housing HWB-2 with ZN-C2M 1080p PixelPro Camera & TG3Z0312FCS-MPIR (3-8mm Megapixel IR auto iris lens) with Pre-wired power & ethernet cables included,...

hwb2-413c1m.jpg
Ganz: hwb2-413c1m

iPak Housing HWB-2 with ZN-C1M 720p PixelPro Camera & H3Z4518CS-MPIR

The Ganz HWB2-413C1M iPak Housing HWB-2 with ZN-C1M 720p PixelPro Camera & H3Z4518CS-MPIR (4.5-13.2mm Megapixel IR manual iris lens) with 24VAC power input, IP65 rated aluminum...

hwb2-413c2m.jpg
Ganz: hwb2-413c2m

iPak Housing HWB-2 with ZN-C2M 1080p PixelPro Camera & H3Z4518CS-MPIR

The Ganz HWB2-413C2M iPak Housing HWB-2 with ZN-C2M 1080p PixelPro Camera & H3Z4518CS-MPIR (4.5-13.2mm Megapixel IR manual iris lens) with Feed-through mounting bracket conceals...

ltc-9480-00.jpg
Bosch: ltc-9480-00

HOUSING, INDOOR, FOR CAMERA/LENS TO 7-INCH

The Bosch LTC9480/00 is a stylish, economical housing designed to accommodate fixed camera and lens combinations up to 7" in length. A rugged aluminum and polymer construction...

ltc 9488-20.jpg
Bosch: ltc-9488-20

14" Outdoor Housing with Heater - 24 VAC

The Bosch LTC9488/20 is an outdoor housing for use with 24 VAC powered cameras up to 14" in length. A sturdy construction in combination with a built-in heater keeps the camera...

vt-eh10.jpg
Vitek: vt-eh10

Indoor/Outdoor Enclosure
The VT-EH10 is an economical environmental enclosure with rugged construction and attractive design. A forward hinged cover enables easy access to camera for installation and...
vt-eh10-pkhb.jpg
Vitek: vt-eh10-pk

Indoor/Outdoor Enclosure/Wall Mount Combo No Heater/Blower Kit

Indoor/Outdoor Camera Enclosure & Wall Mount Combo

Heavy-Duty Beige Aluminum Construction

Adjustable Camera Tray & Lockable Rear Latch

Top...

vt-eh10-pkhb.jpg
Vitek: vt-eh10-pk-hb

Indoor/Outdoor Enclosure/Wall Mount Combo W/Heater/Blower

Indoor/Outdoor Enclosure/Wall Mount Combo w/Heater/Blower

Retail Pack Contains: VT-EH10, VT-HMT8 & VT-B/H-24

Weather Resistant Aluminum

Top...

Retail Pack Contains    VT-EH10, VT-HMT8 & VT-BH24
Adjustable 360°Pan & 90°Tilt/ Dimensions    8.8"L x 2.9"W x 4.5"H
24VAC Heater & Blower For Use In Extreme Climatic Conditions/Heater    24V - 0.25A, Blower: 24V - 0.14A, IP65 Rated
vt-ptfmk.jpg
Vitek: vt-ptfmk

PTZ Flush Mount Kit W/Clear Or Smoked Bubble

Available Models

Weight    2.8lbs. (1.3Kg) - with Wall Mount
vt-pthsg.jpg
Vitek: vt-pthsg

PTZ Housing W/Clear Or Smoked Bubble

Available Models

Weight    8.6lbs. (3.9Kg) - with Wall Mount
ach13.jpg
Videolarm: ach13

Outdoor Environmental Housing - Standard Body
The environmental ACH13 is an outdoor housing that can accommodate camera/ lens combinations up to 10-5/16" long and 3-3/8" wide. This housing is IP Network Ready, & can be equipped...
ach13hbwm.jpg
Videolarm: ach13hbwm

Outdoor Environmental hsg w/standard aluminium body, clear window, wall mount, 24vac H&B

The Videolarm ACH13HBWM is an outdoor housing for use with a fixed analog camera up to 10.5" in length. With its sturdy metal construction and built-in heater and blower, this...

ad1305.jpg
American Dynamics: ad1305

Camera housing, indoor, corner, 8" (20.3 cm) max. camera/lens length

The American Dynamics AD1305 is a tamper resistant corner-mounted housing. Primarily designed for use in elevators, this compact unit is also perfect for stairwells, entrances,...

ad1314.jpg
American Dynamics: ad1314

Cam housing, indr/outdr, universal, max cam/lens 12" (30.4 cm)

The AD1314 is a high quality environmental housing designed for most CCD cameras and zoom lenses. This polycarbonate housing provides excellent protection for the installed...

adch10hb.jpg
American Dynamics: adch10hb

Camera housing, indr/outdr, universal, max cam/lens 9.5" (24.1 cm), heater, blower

The American Dynamics ADCH10HB  is a high quality environmental housing designed for most CCD cameras and zoom lenses. This polycarbonate housing provides excellent protection...

adch10hbmt8.jpg
American Dynamics: adch10hbmt8

Camera housing, indr/outdr, universal, max cam/lens 9.5" (24.1 cm), htr, blwr, 8" wall mnt

The American Dynamics  ADCH10HBMT8  is a high quality environmental housing designed for most CCD cameras and zoom lenses. This polycarbonate housing provides excellent...

adch10mt8.jpg
American Dynamics: adch10mtb

Camera housing, indr/outdr, universal, max cam/lens 9.5" (24.1 cm), 8" mount

The American Dynamics  ADCH10MT8  is a high quality environmental housing designed for most CCD cameras and zoom lenses. This polycarbonate housing provides excellent protection...

adchmtpole.jpg
American Dynamics: adchmtpole

Camera housing mount, pole, with cable pass-thru

American Dynamics  ADCHMTPOLE is a pole housing mount with cable pass through.

 

Also Available:

adsdu8erhc.jpg
American Dynamics: adsdu8erhc

Dome Housing, Recessed Ceiling Mount, Indoor/Outdoor, SDU, I/O Board, Clear Bubble

The American Dynamics ADSDU8ERHC is a Speed Dome Ultra 8 series housing unit.   Other housing options include:

 

adsduhoc.jpg
American Dynamics: adsduhoc

Dome housing, outdoor, SDU, I/O board, clear bubble, 4 alarm in, white

The ADSDUHOC IP SpeedDome outdoor housings have temperature controlled environment with automatic defog and defrost heater cycle modes. Thermostatically controlled heater and...

adsdupihc.jpg
American Dynamics: adsdupihc

Dome housing, indoor, SDU, clear bubble

The SpeedDome Ultra ADSDUPIHC  indoor dome housing allows the SpeedDome Ultra dome to be installed indoors using the same design as found in the SpeedDome Ultra outdoor housing....

advesdhic.jpg
American Dynamics: advesdhic

VideoEdge SpeedDome Housing, Indoor, Clear

The ADVESDHIC precision crafted bubbles maintain the integrity of light and image, with ceiling, pole, roof, wall and corner mounts available. All housings are made of reinforced,...

advesdhoc.jpg
American Dynamics: advesdhoc

VideoEdge SpeedDome Housing, Outdoor Pendant, Clear

The ADVESDHOC IP SpeedDome outdoor housings have temperature controlled environment with automatic defog and defrost heater cycle modes. Thermostatically controlled heater and...

ams180.jpg
Videolarm: ams-90-180

Indoor Steel Housings
These premier indoor heavy-duty housings are constructed from 14-gauge steel. Seams are welded and mounting hardware is fully contained inside to prevent intrusion on the camera. In addition, a...
ams180.jpg
Videolarm: ams180

RUGGED STEEL WALL MOUNT HOUSING w/security access lock and shields w/mtg hdwe

The Videolarm AMS180 is a steel constructed locked enclosure suitable for housing a camera in potentially unstable monitoring environments such as prisons, construction sites,...

ams90.jpg
Videolarm: ams90

RUGGED STEEL CORNER MOUNT HOUSING

The Videolarm AMS90 is a steel constructed locked enclosure suitable for housing a camera in potentially unstable monitoring environments such as prisons, construction sites,...

ap16.jpg
Videolarm: ap16

Outdoor Tubular Dustproof & Pressurized Environmental Housings
The Moog Videolarm AP-16 units provide a compact camera solution for harsh environments. The units are constructed with a sealed tubular housing made from a thick aluminum that...
Image Sensor    1/4” interline transfer CCD
Output    NTSC
Number of Effective Pixels    Approx. 380,000 pixels
Resolution    470 (H) x 400 (V) TV lines
Lens    23x optical (f=3.6mm - 82.8mm)
bmt10c.jpg
Videolarm: bmt10c

ENVIRO BALLISTIC HSG W/115V HEATER

The Videolarm BMT10C unit is a bullet-resistant environmental camera housing featuring a 7-gauge steel body and is designed to meet or exceed Level  III  protection per UL...

Size (h*w*d)    6.74" x 4.52" x 13.74"
BMT10C    120 Vac, 50/60Hz, 28 VA
BMT10C2    24 Vac, 50/60Hz, 28 VA
BMT10C3    230 Vac, 50/60Hz, 28 VA
caeh13.jpg
Videolarm: caeh13

Environmental Housing Cisco 2500 & 4000 Series IP Camera

The Videoalarm CAEH13 Camera Housing supports Cisco 2500 and 4000 Series video surveillance IP cameras up to 10.5” (26.7 cm). The housing has a hinged, flip-top opening for...

d-i3-6800hb.jpg
I3 International: d-i3-6800hb

Outdoor Box Camera Housing Alum W.Bracket. & Htr-Blr

The D-i3-6800HB is a light duty wall mount camera housing designed specifically for use with any of the i3s camera series. Manufactured from die cast aluminium, the D-i3-6800 is...

d2bw1.jpg
Videolarm: d2bw1

Deputy2 Box with wall mount, support for up to 3 cameras. Stainless Steel construction

The Moog Videolarm  D2BW1 Deputy2 Box with Wall Mount is an electronic cabinet that can accommodate up to 3 cameras (PTZ/Fixed) and has an additional space for...

d4f-av1115v1-3312.jpg
Arecont Vision: d4f-av1115v1-3312

AV1115+MPL33-12 D4F FLUSH MOUNT

The D4F-AV1115v1-3312 of the D4F Series where designed to house Arecont Visions's Compact H.264 MegaVideo Megapixel Cameras with the MPL3312 Vari-Focal lens. These all in one...

All in One Indoor Dome Solution    - AV1115 camera, 2-axis gimbal, 3.3-12mm IR corrected lens and Inceiling Mount Embedded
PoE & Auxiliary Power    12-48 VDC / 24 VAC
d4f-av2115v1-3312.jpg
Arecont Vision: d4f-av2115v1-3312

AV2115V1 + MPL33-12 D4F Flush Mount,CASINO MODE

The D4F-AV2115v1-3312 of the D4F Series where designed to house Arecont Visions's Compact H.264 MegaVideo Megapixel Cameras with the MPL3312 Vari-Focal lens. These all in one...

All in One Indoor Dome Solution    - AV2115 camera, 2-axis gimbal, 3.3-12mm IR corrected lens and Surface Mount Dome
PoE & Auxiliary Power    12-48 VDC / 24 VAC
d4f-av3115v1-3312.jpg
Arecont Vision: d4f-av3115v1-3312

AV3115V1 + MPL33-12 D4F Flush Mount

The D4F-AV3115v1-3312 of the D4F Series where designed to house Arecont Visions's Compact H.264 MegaVideo Megapixel Cameras with the MPL3312 Vari-Focal lens. These all in one...

All in One Indoor Dome Solution    - AV3115 camera, 2-axis gimbal, 3.3-12mm IR corrected lens and Flush Mount Embeded
PoE & Auxiliary Power    12-48 VDC / 24 VAC
d4f-av5115v1-3312.jpg
Arecont Vision: d4f-av5115v1-3312

AV5115v1 + MPL33-12 D4F Flush Mount Indoor

The D4F-AV5115v1-3312 of the D4F Series where designed to house Arecont Visions's Compact H.264 MegaVideo Megapixel Cameras with the MPL3312 Vari-Focal lens. These all in one...

All in One Indoor Dome Solution    - AV5115 camera, 2-axis gimbal, 3.3-12mm IR corrected lens and Flush Mount Embeded
PoE & Auxiliary Power    12-48 VDC / 24 VAC
d4s-av1115v1-3312.jpg
Arecont Vision: d4s-av1115v1-3312

AV1115V1 + MPL33-12 D4S Surface Mount

The D4S-AV1115v1-3312 of the D4S Series where designed to house Arecont Visions's Compact H.264 MegaVideo Megapixel Cameras with the MPL3312 Vari-Focal lens. These all in one...

All in One Indoor Dome Solution    - AV1115 camera, 2-axis gimbal, 3.3-12mm IR corrected lens and Inceiling Mount Embedded
PoE & Auxiliary Power    12-48 VDC / 24 VAC
d4s-av2115v1-3312.jpg
Arecont Vision: d4s-av2115v1-3312

AV2115+MPL33-12 VARIFOCAL D4S SURFACE MOUNT

The D4S-AV2115v1-3312 of the D4S Series where designed to house Arecont Visions's Compact H.264 MegaVideo Megapixel Cameras with the MPL3312 Vari-Focal lens. These all in one...

All in One Indoor Dome Solution    - AV2115 camera, 2-axis gimbal, 3.3-12mm IR corrected lens and Surface Mount Dome
PoE & Auxiliary Power    12-48 VDC / 24 VAC
d4s-av3115v1-3312.jpg
Arecont Vision: d4s-av3115v1-3312

3 Megapixel, 21fps, 3.3-12mm lens, H.264/MJPEG, Indoor Surface Dome

The Arecont Vision D4S-AV3115v1-3312 is a 3 Megapixel, 21fps, 3.3-12mm lens, H.264/MJPEG, Indoor Surface Dome.The  D4S-AV3115V1-3312 has Multi-Streaming, Flexible Cropping and...

Compatible Lens    MPL3312: F1.4, 3.3-12mm, 1/2.5" MPL4.0: F1.8, 4mm, 1/2" Horizontal FOV: MPL33-12 @ 3.3mm: 75° MPL33-12 @ 12mm: 25° MPL4.0: 74°
Compatible Cameras    AV1115,AV1115DN,AV2115,AV2115DN AV3115, AV3115DN, AV5115, AV5115DN
Environmental    Operating temperature -5°C (23˚F) to 45˚C (113˚F) Storage temperature: -30°C (-22°F) to 60°C (140°F) Humidity 0% to 90% (non condensing)
Mechanical    Housing material: Acrylonitrile Butadiene Styrene (ABS) Plastic Dome Cover Protection: Acrylic (PMMA) Color: Beige Mounting Type: Surface Mount
Dome dimension    Bubble Cover: Diameter: 4 inch (101.3 mm); Height: 2.9 inch (51.7mm) Housing: Diameter: 4.7 inch (118.5 mm); Height: 3.8 inch (95.4 mm) Weight w/o camera: 0.47 lbs(0.215kg) Weight w/ camera and lens: 0.98 lbs(0.445kg)
d4s-av5115v1-3312.jpg
Arecont Vision: d4s-av5115v1-3312

AV5115+MPL33-12 VARIFOCAL D4S SURFACE MOUNT

The D4S-AV5115v1-3312 of the D4S Series where designed to house Arecont Visions's Compact H.264 MegaVideo Megapixel Cameras with the MPL3312 Vari-Focal lens. These all in one...

All in One Indoor Dome Solution    - AV5115 camera, 2-axis gimbal, 3.3-12mm IR corrected lens and Flush Mount Embeded
PoE & Auxiliary Power    12-48 VDC / 24 VAC
d4so-av1115v1-3312.jpg
Arecont Vision: d4so-av1115v1-3312

1.3 Megapixel, 42fps, 3.3-12mm lens, H.264/MJPEG, Outdoor Dome

The Arecont Vision D4SO-AV1115v1-3312 is a 1.3 Megapixel, 42fps, 3.3-12mm lens, H.264/MJPEG, Outdoor Dome. The  D4SO-AV1115v1-3312 has the Fastest MegaPixel...

Mechanical    Casing: Die-cast aluminum chassis with 4" polycarbonate dome bubble IP66 weather proof standard Vandal Resistant, IK10 rated Easily adjustable 2-axis camera gimbal w/ 360° pan, 90° tilt Total Unit dimensions: Ø5.5 x 4.9 in (H), bubble only: Ø4.0 x 2.4 in (H) Ø140.3 x 124.6 mm (H), bubble only: Ø102 x 61.8 mm (H) 2.0 lbs (0.91 kg)
Compatible Lens    MPL33-12: F1.6, 3.3-12mm, 1/2.5" optical format Horizontal FOV: 3.3mm: 61° 12mm: 21°
Compatible Cameras    AV1115, AV1115DN, AV2115, AV2115DN, AV3115, AV3115DN, AV5115, AV5115DN
Environmental    Operating temperature: No Heater: -20°C (-4 °F) to 50°C (122 °F) With Heater: -40°C (-40 °F) to 50°C (122 °F) Storage temperature: -30 °C (-22 °F) to 60 °C (140 °F) Humidity 0% to 90% (non condensing)
Accessories    MD-WMT2: Wall Mount (1.5 NTP) MD-CAP: Wall Mount Cap (1.5 NTP) MD-CMT: Pendant Mount MD-JBA: Junction Box Adapter for MegaDome® and MD-CMT MD-CRMA: Corner mount adapter MD-PMA: Pole mount adapter MD-EBA: Electrical box adapter for MegaDome® and MD-CMT MD-1HK: Optional 10W Heater Kit SV-EBA: Electrical Box Adapter for MD-WMT2 SV-JBA: Junction Box Adapter for MD-WMT2 (for retroit and on-site installation)
d4so-av2115v1-3312.jpg
Arecont Vision: d4so-av2115v1-3312

1080p, 32fps, 3.3-12mm lens, H.264/MJPEG, Outdoor Dome

The Arecont Vision D4SO-AV2115v1-3312 is a 1080p, 3.3-12mm lens, H.264/MJPEG, Outdoor Dome.   The D4SO-AV2115V1-3312 has Fast MegaPixel Image Rates 32fps and posses...

Mechanical    Casing: Die-cast aluminum chassis with 4" polycarbonate dome bubble IP66 weather proof standard Vandal Resistant, IK10 rated Easily adjustable 2-axis camera gimbal w/ 360° pan, 90° tilt Total Unit dimensions: Ø5.5 x 4.9 in (H), bubble only: Ø4.0 x 2.4 in (H) Ø140.3 x 124.6 mm (H), bubble only: Ø102 x 61.8 mm (H) 2.0 lbs (0.91 kg)
Compatible Lens    MPL33-12: F1.6, 3.3-12mm, 1/2.5" optical format Horizontal FOV: 3.3mm: 92° 12mm: 31°
Compatible Cameras    AV1115, AV1115DN, AV2115, AV2115DN, AV3115, AV3115DN, AV5115, AV5115DN
Environmental    Operating temperature: No Heater: -20°C (-4 °F) to 50°C (122 °F) With Heater: -40°C (-40 °F) to 50°C (122 °F) Storage temperature: -30 °C (-22 °F) to 60 °C (140 °F) Humidity 0% to 90% (non condensing)
Accessories    MD-WMT2: Wall Mount (1.5 NTP) MD-CAP: Wall Mount Cap (1.5 NTP) MD-CMT: Pendant Mount MD-JBA: Junction Box Adapter for MegaDome® and MD-CMT MD-CRMA: Corner mount adapter MD-PMA: Pole mount adapter MD-EBA: Electrical box adapter for MegaDome® and MD-CMT MD-1HK: Optional 10W Heater Kit SV-EBA: Electrical Box Adapter for MD-WMT2 SV-JBA: Junction Box Adapter for MD-WMT2 (for retroit and on-site installation)
d4so-av3115v1-3312.jpg
Arecont Vision: d4so-av3115v1-3312

3 Megapixel, 21fps, 3.3-12mm lens, H.264/MJPEG, Outdoor Dome

The Arecont Vision D4SO-AV3115v1-3312 is a 3 Megapixel, 21fps, 3.3-12mm lens, H.264/MJPEG, Outdoor Dome. The D4SO-AV3115V1-3312 has Privacy Mask, Extended Motion...

Mechanical    Casing: Die-cast aluminum chassis with 4" polycarbonate dome bubble IP66 weather proof standard Vandal Resistant, IK10 rated Easily adjustable 2-axis camera gimbal w/ 360° pan, 90° tilt Total Unit dimensions: Ø5.5 x 4.9 in (H), bubble only: Ø4.0 x 2.4 in (H) Ø140.3 x 124.6 mm (H), bubble only: Ø102 x 61.8 mm (H) 2.0 lbs (0.91 kg)
Compatible Lens    MPL33-12: F1.6, 3.3-12mm, 1/2.5" optical format Horizontal FOV: 3.3mm: 75° 12mm: 25°
Compatible Cameras    AV1115, AV1115DN, AV2115, AV2115DN, AV3115, AV3115DN, AV5115, AV5115DN
Environmental    Operating temperature: No Heater: -20°C (-4 °F) to 50°C (122 °F) With Heater: -40°C (-40 °F) to 50°C (122 °F) Storage temperature: -30 °C (-22 °F) to 60 °C (140 °F) Humidity 0% to 90% (non condensing)
Accessories    MD-WMT2: Wall Mount (1.5 NTP) MD-CAP: Wall Mount Cap (1.5 NTP) MD-CMT: Pendant Mount MD-JBA: Junction Box Adapter for MegaDome® and MD-CMT MD-CRMA: Corner mount adapter MD-PMA: Pole mount adapter MD-EBA: Electrical box adapter for MegaDome® and MD-CMT MD-1HK: Optional 10W Heater Kit SV-EBA: Electrical Box Adapter for MD-WMT2 SV-JBA: Junction Box Adapter for MD-WMT2 (for retroit and on-site installation)
d4so-av5115v1-3312.jpg
Arecont Vision: d4so-av5115v1-3312

5 Megapixel, 14fps, 3.3-12mm lens, H.264/MJPEG, Outdoor Dome

The Arecont Vision D4SO-AV5115v1-3312 is a 5 Megapixel, 14fps, 3.3-12mm lens, H.264/MJPEG, Outdoor Dome. The D4SO-AV5115V1-3312 also has Multi-Streaming, Flexible Cropping and Bit...

Mechanical    Casing: Die-cast aluminum chassis with 4" polycarbonate dome bubble IP66 weather proof standard Vandal Resistant, IK10 rated Easily adjustable 2-axis camera gimbal w/ 360° pan, 90° tilt Total Unit dimensions: Ø5.5 x 4.9 in (H), bubble only: Ø4.0 x 2.4 in (H) Ø140.3 x 124.6 mm (H), bubble only: Ø102 x 61.8 mm (H) 2.0 lbs (0.91 kg)
Compatible Lens    MPL33-12: F1.6, 3.3-12mm, 1/2.5" optical format Horizontal FOV: 3.3mm: 95° 12mm: 32°
Compatible Cameras    AV1115, AV1115DN, AV2115, AV2115DN, AV3115, AV3115DN, AV5115, AV5115DN
Environmental    Operating temperature: No Heater: -20°C (-4 °F) to 50°C (122 °F) With Heater: -40°C (-40 °F) to 50°C (122 °F) Storage temperature: -30 °C (-22 °F) to 60 °C (140 °F) Humidity 0% to 90% (non condensing)
Accessories    MD-WMT2: Wall Mount (1.5 NTP) MD-CAP: Wall Mount Cap (1.5 NTP) MD-CMT: Pendant Mount MD-JBA: Junction Box Adapter for MegaDome® and MD-CMT MD-CRMA: Corner mount adapter MD-PMA: Pole mount adapter MD-EBA: Electrical box adapter for MegaDome® and MD-CMT MD-1HK: Optional 10W Heater Kit SV-EBA: Electrical Box Adapter for MD-WMT2 SV-JBA: Junction Box Adapter for MD-WMT2 (for retroit and on-site installation)
dd5-fm-series.jpg
Pelco: dd5-fm

Fixed Camera Mount for Spectra Domes
The DD5-FM is a fixed camera mount that can be installed in any Spectra III™ Series, Spectra® IV Series, or newer model back box. This makes it ideal for applications that require...
Camera Voltage    18-30 VAC; 24 VAC nominal
Camera Connections - Video    BNC
Camera Connections - Power    2 wires, 26 AWG
Maximum Camera/Lens Size    Accepts camera and lens combinations* including BNC connector up to 5.00" L x 2.75" W x 2.75" H (12.70 x 6.99 x 6.99 cm)
Pan Adjustment    360°
dfh10c2w.jpg
Videolarm: dfh10c2w

Dust-proof tubular housing, 24vac or 12 vdc input, heater & blower with feed-thru wall/pole mount

The Videolarm  DFH10C2W Fusion Pressurized and Fusion Dust-Proof tubular camera enclosures protect fixed IP cameras and lenses from debris, chemicals and other contaminants,...

dfh10c8wy.jpg
Videolarm: dfh10c8wy

Dust-proof tubular housing, dynamic power allocation PoE input

The Videolarm DFH10C8WY Fusion Pressurized and Fusion Dust-Proof tubular camera enclosures protect fixed IP cameras and lenses from debris, chemicals and other contaminants,...

dome4-i.jpg
Arecont Vision: dome4-i

Indoor/Outdoor 4" Vandal Resistant Dome

The Arecont Vision DOME4-I is an excellent indoor protection for the entire MegaVideo ® line of Arecont Vision cameras. Combining this 4" dome with the superior imaging of an AV...

Pixel Density    0.00 MP
Frame Rate     0.0
Mechanical    Housing Material: Aluminum Dome Cover Protection: Vandal Resistant Polycarbonate Dome Cover Diameter: 4.5" (160mm) Back Plate Diameter: 6.3" (160mm) Housing Height: 4.9" (125mm) Dome Cover Height: 2.8" (70mm) Housing Diameter: 6.3" (160mm) Weight Without Camera: 2.2lbs (1kg) Security: Tamper Proof Screws
Environment    Operating Temperature: 0°C (32 °F) to 50°C (122 °F) Humidity: 0 to 95% relative, non-condensing Enclosure Protection: IP66 Rating
dome5-i.jpg
Arecont Vision: dome5-i

5" REC DOME FOR SINGLE/DUAL SENSOR CAMERA - INDOOR ONLY

The Arecont Vision DOME5-I is an Indoor 5" recessed dome for single/dual sensor cameras.   The DOME5-I could beuse with any Arecont Vision camera and has 3-Axis hinge mechanism...

Pixel Density    0.00 MP
Mechanical    Bubble Diameter: 5" (127mm) Housing Height: 3" (76mm) Dome Height: 2.8" (70mm) Housing Diameter: 7" (178mm) Dome Cover Height: 2.8" (70mm)
Environment    Operating Temperature: 0C (32 °F) to 50C (122 °F) Humidity: 0 to 95% relative, non-condensing Enclosure Protection: Indoor Only
e706-series.jpg
Pelco: e706-series

Outdoor Dust-Tight Enclosure
The E706 Series dust-tight enclosure permits the use of cameras in small-particle and dusty environments. The enclosure is constructed from aluminum and is also available in...
Camera Mounting    Removable sled with multiple mounting holes
Cable Entry    Two adjustable, sealable glands: One with 0.375" (0.95 cm) inside diameter and one with 0.50" (1.27 cm) inside diameter
Viewing Window    0.187" (4.74 mm) thick Lucite® SAR acrylic
Latches    Draw latch with security features
Maximum Camera and Lens Size    With or Without Blower and/or Heater Kits: 3.50" H x 4.25" W x 13.25" L (8.89 x 10.79 x 33.66 cm) or 13.25" L x 4.8" diameter (33.66 x 12.20 cm)
eh1000.jpg
Pelco: eh1000-series

In-Ceiling Large Wedge Enclosure
The EH1000 Series is a low profile ceiling enclosure for use with large format cameras. The unobtrusive, streamlined design compliments any business or office decor.
Camera Mounting    Adjustable bracket capable of supporting a maximum of 10 lb (4.53 kg)
Maximum Camera and Lens Size    Accepts camera and lens combinations* (including BNC connector) up to: 4.50" H x 6.50" W x 15.00" L (11.43 x 16.51 x 38.10 cm)
Ceiling Mounting    Upper section flange-mounted to fixed ceiling or E1003 rotating mounting plate for false ceilings
Cable Entry    Conduit knockouts on upper back box; two on each end
Lock    Key lock
eh2020-series.jpg
Pelco: eh2020-series

In-Ceiling Small Wedge Enclosure
The EH2020 Series is a small, low profile ceiling enclosure designed for use with small-to-medium format cameras. The unobtrusive, compact design complements any business or office...
Camera Mounting    Adjustable bracket capable of supporting a maximum weight of 10 lb (4.53 kg)
Maximum Camera and Lens Size    Accepts camera and lens combinations* (including BNC connector) up to: 3.0" H x 2.8" W x 8.0" L (7.62 x 7.11 x 20.32 cm)
Ceiling Mounting    Upper section flange-mounted to fixed ceiling or ceiling tile. Two soft-ceiling mounting brackets provided. Can also be mounted in E2020 rotating mounting plate for false ceiling applications
Cable Entry    Two 0.875-inch (2.22 cm) diameter conduit knockouts on front and rear of back box
Security    Two tamper-resistant screws (hollow Allen wrench supplied)
eh2100.jpg
Pelco: eh2100-series

In-Ceiling Medium Wedge Enclosure
The EH2100 and EH2100P are low profile ceiling enclosures designed for use with medium-to-large format cameras. The unobtrusive, compact design complements any...
Camera Mounting    Adjustable camera sled capable of supporting a maximum weight of 10 lb (4.53 kg). Sled can be adjusted horizontally or vertically
Maximum Camera and Lens Size    Accepts camera and lens combinations* (including BNC connector) up to: 3.0" H x 4.0" W x 10.0" L (7.62 x 10.16 x 25.4 cm)
Ceiling Mounting    Upper section flange-mounted to fixed ceiling or ceiling tile. Ceiling support rails are provided
Cable Entry    Conduit knockouts, EH2100 only; must be drilled for EH2100P
Lock    Phillips screw
eh2500-series.jpg
Pelco: eh2500-series

Rain and Dustproof Cylindrical Enclosure
The enclosures of the EH2500 Series are rain- and dustproof to protect CCTV cameras from adverse environmental conditions.

Constructed from aluminum, the enclosures...
Camera Mounting    Multiple mounting holes on removable camera sled
Latching    Two captivated screws
Maximum Camera/Lens Size    Accepts camera and lens combinations* (including BNC connector) up to - EH2508: 6.25" L x 2.75" W x 2.75" H (15.88 x 6.99 x 6.99 cm)
Maximum Camera/Lens Size    Accepts camera and lens combinations* (including BNC connector) up to - EH2508-1/-2/-3: 5.25" L x 2.75" W x 2.75" H (13.34 x 6.99 x 6.99 cm)
Maximum Camera/Lens Size    Accepts camera and lens combinations* (including BNC connector) up to - EH2512: 10.25" L x 2.75" W x 2.75" H (26.04 x 6.99 x 6.99 cm)
eh3508-series.jpg
Pelco: eh3508-series

Small Enclosure with Forward-Opening Lid
The EH3508 Series are indoor/outdoor, low cost camera enclosures constructed from die-cast and extruded aluminum.

The EH3508 Series is the smallest...
Camera Mounting    Multiple holes on adjustable camera sled; camera sled mounts in threaded strip for easier removal and can be inverted for additional camera elevation
Cable Entry    Two PG13.5 compression glands on bottom; maximum cable diameter 1.19 cm (0.47-inch)
Cable Entry Holes    2.22 cm (0.875-inch) diameter; will accept 1.27 cm (0.5-inch) conduit fitting when compression gland is removed
Latch    Link-lock No. 3, stainless steel; can be secured with padlock (not supplied)
Input Voltage - EH3508-1    120 VAC, 50/60 Hz
eh3512_3515-series.jpg
Pelco: eh3512-e3515-series

Small Enclosure with Forward-Opening Lid and Optional Blower
The EH3512/EH3515 Series are indoor/outdoor, low cost camera enclosures constructed from die-cast and extruded aluminum. The EH3512 Series has a lower body length...
Camera Mounting    Multiple holes on adjustable camera sled; camera sled can be inverted for additional camera elevation
Maximum Camera Size    Accepts camera and lens combinations* (including BNC connector) up to 7.92 x 7.62 cm (3.12" W x 3.00" H) and the following length - EH3512: 26.03 cm (10.25")
Maximum Camera Size    Accepts camera and lens combinations* (including BNC connector) up to 7.92 x 7.62 cm (3.12" W x 3.00" H) and the following length - EH3512-1/-2/-3: 22.86 cm (9.00")
Maximum Camera Size    Accepts camera and lens combinations* (including BNC connector) up to 7.92 x 7.62 cm (3.12" W x 3.00" H) and the following length - EH3512-1HD/-2HD/-3HD: 25.40 cm (10.00")
Maximum Camera Size    Accepts camera and lens combinations* (including BNC connector) up to 7.92 x 7.62 cm (3.12" W x 3.00" H) and the following length - EH3515: 33.66 cm (13.25")
eh4000.jpg
Pelco: eh4000-series

Medium Fixed Mount or Pan/Tilt Enclosure
The EH4000 Series are low cost camera enclosures designed especially for indoor applications.

The enclosure features a removable rear cap for easy access to camera...
Camera Mounting - EH4010    Adjustable L-shaped bracket with one mounting hole attached to the slide-out rail
Maximum Camera and Lens Size    Accepts camera and lens combinations* (including BNC connector) up to - EH4010: 3.50" H x 5.25" W x 8.00" L (8.89 x 13.33 x 20.32 cm)
Maximum Camera and Lens Size    Accepts camera and lens combinations* (including BNC connector) up to - EH4014 3.50" H x 5.25" W x 12.00" L (8.89 x 13.33 x 30.48 cm)
Viewing Window    0.125" (3.17 mm) thick Lexan®
Viewing Window Area    2.50" H x 3.75" W (6.35 x 9.52 cm)
eh4700-series.jpg
Pelco: eh4700-series

Medium Enclosure with Forward-Opening Lid
The EH4700 Series are indoor/outdoor enclosures constructed from die-cast and extruded aluminum. Available in an 18-inch (45.72 cm) length (EH4718) and 22-inch...
Cable Entry    Two PG13.5 compression glands on bottom; 0.47-inch (1.19 cm) maximum cable diameter
Cable Entry Holes    0.875-inch (2.22 cm) diameter; will accept 0.5-inch (1.27 cm) conduit fitting when compression gland is removed
Camera Mounting    Removable camera sled; can be inverted
Rear Latch    Link-lock, No. 3, stainless steel; can be secured with padlock (not supplied)
Input Voltage    24 VAC, 120 VAC or 230 VAC, 50/60Hz.
eh4700db-series.jpg
Pelco: eh4700db-series

Small-to-Medium Top Mounting Enclosure with Drop-Bottom Access
The EH4700DB Series are indoor/outdoor enclosures constructed from die cast and extruded aluminum. They are available in 13-inch (33.02 cm) (EH4712DB) or 18-inch...
Cable Entry    Two PG13.5 UL compression glands on lid; maximum cable diameter 0.47 inch (1.19 cm)
Cable Entry Holes    0.875-inch (2.22 cm) diameter; will accept 0.5-inch (1.27 cm) conduit fitting when gland is removed
Camera Mounting    Removable camera sled
Access Door Latch    1/4-turn latch with molded vinyl cap
Input voltage    24 VAC, 120 VAC, or 230 VAC, 50/60 Hz
eh5700-series.jpg
Pelco: eh5700-series

Large Outdoor Enclosure
The EH5700 Series are indoor/outdoor enclosures designed for use with Pelco’s medium- and heavy-duty pan and tilts or fixed mounts. Constructed of aluminum and available in a...
Input Voltage    24, 120 or 230 VAC, 50/60 Hz
Electrical Connection    Connectors for power input, lens, camera and accessories (-1/-2/-3 models only)
(-1/-2/-3 models only)    Heater and defroster activate ON at 42-58°F (6-14°C) and OFF at 72-88°F (22-31°C). Blower activates ON at 77-93°F (25-34°C) and OFF at 62-78°F (17-26°C)
Camera Mounting    Removable camera sled; can be inverted
Cable Entry    Two PG13.5 UL glands on bottom of enclosure; 0.47-inch (1.19 cm) maximum cable diameter
ehxe-series.jpg
Pelco: ehxe

Outdoor Explosion Proof Enclosure
The EHX*E Series explosionproof camera enclosures are designed to meet the rigorous requirements of explosionproof and dustignitionproof electrical equipment for installation and...
Cable Entry    2 explosionproof sealable fittings (supplied); 0.50-inch (1.27 cm) maximum inside diameter; pipe plug supplied for possible unused gland in rear plate
Front Window    Fully tempered plate glass - EHX4E: 4.25-inch (10.80 cm) diameter, 0.475-inch (1.21 cm) thick
Front Window    Fully tempered plate glass - EHX6E/EHX6E-16: 4.50-inch (11.43 cm) diameter, 0.50-inch (1.27 cm) thick
Front Window    Fully tempered plate glass - EHX8E: 5.75-inch (14.92 cm) diameter, 0.50-inch (1.27 cm) thick
Window Viewing Area - EHX4E    3.19-inch (8.10 cm) diameter
exhc000.jpg
Videotec: exhc000

Housing RAL7032, certified IECEx Ex d IIC T6 Ex tD A21 IP66 T85 °C

The Videotec EXHC000 is a Explosion-proof housings with Solid anticorodal aluminium construction, 2 holes for cable glands 3/4" NPT, and has Internal usable area (WxHxL):...

exhc000g.jpg
Videotec: exhc000g

Housing for thermal camera equipped with 114mm Germanium glass

The Videotec EXHC000G is Explosion-proof housings for thermal cameras, it is made of Solid anticorodal aluminium construction and has Germanium

exptc000.jpg
Videotec: exptc000

P&T 24Vac with integrated housing RAL7032

The Videotec EXPTC000 is an Explosions-proof integrated Pan&tilts with camera housing with Solid anticorodal aluminium construction, Horizontal range 360 ° with speed 6 °/s,...

exptc010g.jpg
Videotec: exptc010g

Explosion-proof Pan&Tilt for thermal cameras

The Videotec EXPTC010G is Explosion-proof Pan&Tilt for thermal cameras with Epoxypolyester powder painting, RAL7032, Germanium window, and has a Solid anticorodal aluminium...

fch11c2wq.jpg
Videolarm: fch11c2wq

Environmental housing with heat exchanger, feed-thru wall/pole mount

The Videolarm FCH11C2WQ Fusion Camera Housing is an IP66-rated weatherproof enclosure designed to protect the camera from external factors such as dust, accidental contact, and...

fch11c2wy.jpg
Videolarm: fch11c2wy

Environmental housing with feed-thru wall/pole mount

The Videolarm FCH11C2WY Fusion Camera Housing with Heater & Blower is designed to fit a multitude of rugged outdoor surveillance applications. The housing is constructed of...

fch11c4wq.jpg
Videolarm: fch11c4wq

24vac input, output 802.3af PoE for the camera, heater/blower, adjustable sunshield

The Videolarm FCH11C4WQ rugged, ergonomic and technologically-advanced Fusion Camera Housing Line of professional-grade environmental enclosures protects fixed IP cameras and...

fch11c4wy.jpg
Videolarm: fch11c4wy

24vac input, output 802.3af PoE for the camera, heater/blower

The Videolarm  FCH11C4WY Fusion Camera Housing Series of environmental camera enclosures is designed to fit a multitude of rugged outdoor surveillance applications. The housing...

fch11c8wq.jpg
Videolarm: fch11c8wq

Environmental housing with heat exchanger, feed-thru wall/pole mount

The Videoalarm FCH11C8WQ Fusion Camera Housing with Thermic Cooling Technology is a professional grade outdoor camera housing designed to keep advanced IP fixed cameras operating...

fch11c8wy.jpg
Videolarm: fch11c8wy

Environmental housing with feed-thru wall/pole mount, dynamic power allocation PoE input

The Videolarm FCH11C8WY Environmental Camera Housing with Heater/Blower is an IP66-rated weatherproof enclosure designed to protect the camera from dust,...

fch11cw.jpg
Videolarm: fch11cw

Environmental housing with feed-thru wall/pole mount

The Videolarm FCH11CW Fusion Rugged Environmental Camera Housing is an IP66-rated weatherproof enclosure that is designed to protect the camera from dust,...

fch360c2wy.jpg
Videolarm: fch360c2wy

Environmental housing with feed-thru wall/pole mount, bubbled window for Immervision 360 fixed cameras

The Videolarm  FCH360C2WY Fusion Camera Housing  360o enables Panomorph lenses, manufactured by ImmerVision, to be used in conjunction with wall or pole mount applications. The...

fch360c8wy.jpg
Videolarm: fch360c8wy

Environmental housing with feed-thru wall/pole mount, bubbled window for Immervision 360 fixed cameras

The Videolarm FCH360C8WY Fusion Camera Housing  360o enables Panomorph lenses, manufactured by ImmerVision, to be used in conjunction with wall or pole mount applications. The...

fch360cw.jpg
Videolarm: fch360cw

Env. housing with feed-thru wall/pole mount, accommodates 360 panomorph lens

The Videolarm FCH360CW Fusion Camera Housing  360o enables Panomorph lenses, manufactured by ImmerVision, to be used in conjunction with wall or pole mount applications. The...

fdp75c12n.jpg
Videolarm: fdp75c12n

IP Ready 7” Outdoor dome hsg w/pendant mount

The Videolarm FDP75C12N is an industrial grade outdoor housing that can be used with an IP PTZ dome camera up to 7" in width. In addition to its high degree of structural...

fdp75c2n.jpg
Videolarm: fdp75c2n

IP Ready 7" Outdoor dome hsg w/pendant mount, clear polycarbonate dome

The Videolarm FDP75C2N is an industrial grade outdoor housing that can be used with an IP PTZ dome camera up to 7" in width. In addition to its high degree of structural...

fdp75c8n.jpg
Videolarm: fdp75c8n

POE Ready, 7" outdoor pendant mount dome housing for POE & POE Plus enabled PTZ cameras

The Moog Videolarm FDP75C8N PoE Ready Fusion Dome (7" / 177.8mm, Clear) is an outdoor dome camera enclosure for PoE (Power over Ethernet)-enabled cameras. The advanced technology...

fdp75cf2n.jpg
Videolarm: fdp75cf2n

IP Ready 7" Outdoor dome hsg w/pendant mount, clear polycarbonate dome

The Videolarm FDP75CF2N is an industrial grade outdoor housing that can be used with a fixed IP camera up to 7" in length. In addition to its high degree of structural integrity,...

fdp75cf8n.jpg
Videolarm: fdp75cf8n

POE Ready, 7" outdoor pendant mount dome housing for POE & POE Plus enabled fixed cameras

The Moog Videolarm FDP75CF8N PoE Ready Fusion Dome (7" / 177.8mm, Clear) is an outdoor dome camera enclosure for PoE (Power over Ethernet)-enabled cameras. The advanced technology...

fdp75t2n.jpg
Videolarm: fdp75t2n

IP Ready 7" Outdoor dome hsg w/pendant mount, tinted polycarbonate dome

The Videolarm FDP75T2N is an industrial grade outdoor housing that can be used with an IP PTZ dome camera up to 7" in width. In addition to its outstanding structural integrity,...

fdp75tf2n.jpg
Videolarm: fdp75tf2n

IP Ready 7” Outdoor dome hsg w/pendant mount, tinted polycarbonate dome

The Videolarm FDP75TF2N is an industrial grade outdoor housing that can be used with a fixed IP camera up to 7" in length. In addition to its high degree of structural integrity,...

fdw75c12n.jpg
Videolarm: fdw75c12n

IP Ready 7” Outdoor dome hsg w/wall mount

The Videolarm FDW75C12N is an outdoor dome housing designed to accommodate a single IP network PTZ camera up to 7.5" in length. Its built in heater and blower operate on 12 VDC...

fdw75c2n.jpg
Videolarm: fdw75c2n

IP Ready 7" Outdoor dome hsg w/wall mount, clear polycarbonate dome

The Videolarm FDW75C2N is a 7" indoor pendant-mount dome enclosure for IP-networked/wireless PTZ cameras. The system can accommodate cameras from Axis, Canon, Elmo, JVC, Panasonic...

fdw75c8n.jpg
Videolarm: fdw75c8n

POE Ready, 7" outdoor wall mount dome housing for POE & POE Plus enabled fixed cameras

The Videolarm Moog  FDW75C8N PoE Ready FusionDome™ camera enclosure provides a simple and quick installation that reduces project cost. The advanced technology engineered...

fdw75cf2n.jpg
Videolarm: fdw75cf2n

IP Ready 7” Outdoor dome hsg w/wall mount, clear polycarbonate dome

The Videolarm FDW75CF2N is an outdoor dome enclosure specifically designed to house a fixed IP camera. It features an integrated heater and blower system, and comes with a wall...

fdw75t12n.jpg
Videolarm: fdw75t12n

IP Ready 7" Outdoor dome hsg w/wall mount

The Videolarm FDW75T12N is an industrial grade outdoor housing that can be used with an IP PTZ dome camera up to 7" in width. In addition to its high degree of structural...

fdw75t2n.jpg
Videolarm: fdw75t2n

IP Ready 7" Outdoor dome hsg w/wall mount, tinted polycarbonate dome

The Videolarm FDW75T2N is an industrial grade outdoor housing that can be used with an IP PTZ dome camera up to 7" in width. It comes equipped with a heater and blower system to...

fdw75tf2n.jpg
Videolarm: fdw75tf2n

IP Ready 7" Outdoor dome hsg w/wall mount, tinted polycarbonate dome

The Videolarm FDW75TF2N is an industrial grade outdoor enclosure that can be used to house a professional fixed analog or IP network CCTV camera up to 7" in length. In addition to...

heg housing 14.jpg
Videotec: heg-housing-14

Large-sized housing 14"

The Videotec HEG HOUSING 14 is Large-sized housing with Slide extractable body and has a Version available with a very efficient cooling system for installation with IP cameras...

heg housing 18.jpg
Videotec: heg-housing-18

Large-sized housing 18"

The Videotec HEG HOUSING 18 is Large-sized housing with a Slide extractable body and has Versions with reinforced double heater (down to -40 °C(-40 °F) or triple (down to -58...

hgv housing.jpg
Videotec: hgv-housing

Housing 20.4" (520mm) w/ Sunshield, Triple Fan-assisted Heater

The Videotec HGV HOUSING is an Extra large-sized housing with Extra-large dimensions to fit the largest motorized zoom lenses, Removable top body with safety cord, and is Equipped...

hov.jpg
Vicon: hov

HOUSING; 12 in.; aluminum construction; side opening

The Vicon HOV HOUSING; 12 in.; aluminum construction; side opening with Weatherproof IP66/IP67 Model with heater and sunshield and has a Wall mounting option

...

hpmvn-c6.jpg
JVC: hpmvn-c6

7" Outdoor Pendant Mount Dome Housing with Heater & Blower for VNC655U, VNC625U and TKC-625U Cameras

The JVC HPMVN-C6 is a 7" pendant mount dome housing perfectly constructed to protect a camera outdoors, with its built-in heater and blower working in harmony to...

hprvn-c6.jpg
JVC: hprvn-c6

PRESSURIZED DOME HOUSING

The JVC HPRVNC-6 pressurized dome housing is sealed and charged with dry nitrogen. The nitrogen charge provides maximum protection from moisture, dust and insects, elements that...

hs1500-series.jpg
Pelco: hs1500-series

Indoor Corner Mount Enclosure
The HS1500 Series high security enclosure is designed for applications such as elevators, parking garages, classrooms, detention cells, etc., requiring maximum protection from...
Camera Mounting    Adjustable tilt table
Maximum Camera and Lens Size    Accepts camera and lens combinations* (including BNC connector) up to: 10.16 x 10.16 x 20.32 cm (4.0" H x 4.0" W x 8.0" L)
Enclosure Mounting    Four 0.99 cm (0.390-inch) diameter holes on protected rear surface
Cable Entry    Access through back and top
Security    Tamper-resistant screw (hollow Allen wrench supplied)
hs2100-series.jpg
Pelco: hs2100-series

Indoor Low Profile Wedge Enclosure
The HS2100 Series is a low profile ceiling enclosure designed for use with solid-state CCD cameras. The unobtrusive, compact design compliments any business or office decor and...
Camera Mounting    Adjustable bracket capable of supporting a maximum of 10 lb (4.53 kg)
Maximum Camera and Lens    Size Accepts camera and lens combinations* (including BNC connector) up to: 3.00" H x 4.00" W x 10.00" L (7.62 x 10.16 x 25.40 cm)
Viewing Window Area    4.00" W x 2.25" H (10.16 x 5.72 cm)
Ceiling Mounting    Upper section flange-mounted to fixed ceiling or ceiling tile. Ceiling support rails provided.
Cable Entry    Two conduit knockouts on upper back box
hs3000_3020-series.jpg
Pelco: hs3000-hs3020-series

Indoor Ceiling, Wall Mount Enclosure
The HS3000 Series is a high security camera enclosure designed for installations such as ATM bank machines, prisons, detention cells, etc., requiring maximum protection from...
Camera Mounting    Adjustable tilt table
Maximum Camera and Lens Size    Accepts camera and lens combinations* (including BNC connector) up to: 3.75" H x 3.25" W x 9.00" L (9.53 x 8.25 x 22.86 cm)
Window Viewing Area    2.75" H x 3.00" W (6.99 x 7.62 cm)
Enclosure Mounting    Four 0.39-inch (0.99 cm) diameter holes on protected rear surface
Cable Entry    Three 0.50-inch (1.27 cm) cable knock-out holes; two on flat mounting surface and one on end opposite viewing window
hs8080_8134-series.jpg
Pelco: hs8080-hs8134-series

Indoor Ceiling Mount Enclosure
The HS8080/HS8134 Series are high security ceiling mount enclosures designed for applications requiring maximum protection from vandalism. The HS8080 Series is...
Camera Mounting    Removable, adjustable camera mount
Maximum Camera and Lens Size Accepts camera and lens combinations* (including BNC connector) up to    3.50" H x 3.00" W x 9.75" L (8.89 x 7.62 x 24.77 cm)
Viewing Window - HS8080    0.25-inch (6.35 mm) thick Lexan®
Viewing Window - HS8134    0.50-inch (12.7 mm) thick Lexan®
Viewing Window Area    3.25" W x 4.75" H (8.25 x 12.07 cm)
hsg2.jpg
Arecont Vision: hsg2

HSG2 Outdoor PoE, IP67 Housing

The Arecont Vision HSG2 environmental PoE housing provides excellent protection for the entire line of MegaVideo and MegaVideo Compact IP cameras. This housing requires the...

Mechanical    Housing material: Aluminum Color: Ivory Die Casting Housing Dimension: 136(W)x95(H)x322(L)mm / 5.3"(W)x3.7"(H)x12.6"(L) Internal Usable Area: 111(W)x75(H)x240(L)mm / 4.3"(W)x2.9"(H)x9.4"(L) Internal Cable Management Weight w/o camera: Housing: 2500g (5.51 lbs)
Electrical    Power Supply: PoE 802.3 af class 3 to support camera, dual fans and heater Auxiliary Power: 12VDC Power Consumption: 13 Watts Maximum, including, Heater: 3 watts Fan: 1.4 watts (each) Heater on: (PoE or 12VDC); 4°C ± 3°C Fan on: (PoE or 12VDC); Fan#1: Always on; Fan #2: 35°C ± 5°C
Environment    Operating Temperature - 40°C (-40°F) to 60°C (140°F) Operating Humidity 90% RH (max)
Compatibility    MegaVideo® Camera MegaVideo® Compact Camera
Compatible Accessories and Cameras    HSG2-WMT: Wall Mount SV-JBA: Junction Box Adapter SV-EBA: Electrical Box Adapter MD-CRMA: Corner Mount Adapter MD-PMA: Pole Mount Adapter
htg37k1a000.jpg
Videotec: htg37k1a000

Large housing for thermal camera

The Videotec HTG37K1A000 is Large housing for thermal camera its comes with a Germanium window, intergrated heater, and has Available accessories: camera power supply.

...

i3-6801hb.jpg
I3 International: i3-6801hb

Vandal-proof, Side-opening Housing & Bracket

The i3 International I3-6801HB Vandal-proof, Side-opening Housing & Bracket with Waterproof complies with the IP67 standard, Die-cast aluminium, resistant to impacts, and has an...

i3h725.jpg
I3 International: i3h725

Di-Cast IP67 Aluminum Housing

The i3 International I3H725 Di-Cast IP67 Aluminum Housing with Die-cast aluminium,resistant to impacts, Internal cable management, and Complies with the IP67 standard

...

i3i070hb.jpg
I3 International: i3i070hb

Di-Cast Alum Housing IP67 24Vac VP Htr-Blr w.IRs 230ft w.Bkt 25w

The i3i1070HB turns non-weatherproof cameras into an outdoor rated unit. An excellent visual deterrent in a longer version. i3 International produces a range of camera and DVR...

i3s725.jpg
I3 International: i3s725

Di-Cast Alum Sun Shroud For Di-Cast Housings

The i3 International I3S725 Di-Cast Alum Sun Shroud For Di-Cast Housings  


ifdp75cf.jpg
Videolarm: ifdp75cf

IP Ready 7" Indoor dome hsg w/pendant mount, clear dome, for an IP Network fixed camera, no electronics

Videolarm is a world renowned manufacturer of quality housings and camera systems for the security industry. With its supreme structural integrity and contemporary design, the Videolarm...

ifdp75tf.jpg
Videolarm: ifdp75tf

IP Ready 7” Indoor dome hsg w/pendant mount, tinted dome

The Videolarm IFDP75TF is an indoor dome housing designed to accommodate a single fixed IP network camera up to 7.5" in length. With its durable engineered plastic top and...

ifdp8cf.jpg
Videolarm: ifdp8cf

8" Indoor FusionDome hsg w/pendant mount, clear dome, plus (1) fixed camera bracket

The Videoalarm IFDP8CF FusionDome - Pendant Mount (Clear) is an 8” (20.6) indoor dome that supports cameras up to 8.5”...

ifdw75cf.jpg
Videolarm: ifdw75cf

7" Indoor dome hsg w/wall mount, clear dome, for an IP Network fixed camera, no electronics

Videolarm is a world renowned manufacturer of quality housings and camera systems for the security industry. With its supreme structural integrity and contemporary design, the...

ifdw75tf.jpg
Videolarm: ifdw75tf

7" Indoor dome hsg w/wall mount, tinted dome, for an IP Network fixed camera, no electronics

Videolarm is a world renowned manufacturer of quality housings and camera systems for the security industry. With its supreme structural integrity and contemporary design, the Videolarm...

igloo-dome.jpg
Videolarm: igloo-dome

Air-Conditioned Dome
Restricted by intense heat and humidity® Videolarm's Igloo Dome provides you with an air-conditioned solution to monitor in excessive heat climates with temperatures up-to 75° C / 167° F. The...
Over-temperature protection for cooling system   
Over-temperature protection for cooling system   
Over-temperature protection for cooling system   
Over-temperature protection for cooling system   
Over-temperature protection for cooling system   
no-image.jpg
Toshiba: ipx-ed-24v

24 VAC Outdoor Dome Housing (IK-WB16A)

The Toshiba IPX-ED-24V Environmental Dome Enclosure with Outdoor Use / 24 VAC Heater & Fan and Operates under 95% Humidity

irhp75cf.jpg
Videolarm: irhp75cf

7" Vandal-Resistant Indoor dome hsg w/pendant mount, rugged cast aluminum top and polycarbonate clear dome

The Videolarm IRHP75CF 7" Vandal-Resistant Indoor Dome Housing can be used to house an analog or IP camera, up to 7.5" in length, in an indoor location....

irhp75tf.jpg
Videolarm: irhp75tf

7" Vandal-Resistant Indoor dome hsg w/pendant mount, rugged cast aluminum top and polycarbonate tinted dome

The Videolarm IRHP75TF is an indoor dome housing capable of accommodating analog and network cameras from Canon, Elmo Axis, JVC, Panasonic and Sony. With its...

irhw75tf.jpg
Videolarm: irhw75tf

7" Vandal-Resistant Indoor dome hsg w/wall mount, rugged cast aluminum top and polycarbonate tinted dome

The Videolarm IRHW75TF is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. Its rugged construction makes it the perfect...

irm7cf.jpg
Videolarm: irm7cf

7" Vandal-Resistant Indoor Recessed dome hsg, w/recessed ceiling mount, clear dome, for an IP Network fixed camera

The Videolarm IRM7CF is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. Its rugged construction makes it the perfect...

irm7tf.jpg
Videolarm: irm7tf

7" Vandal-Resistant Indoor Recessed dome hsg, w/recessed ceiling mount

The Videolarm IRM7TF is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. Its rugged construction makes it the perfect...

ism5cn.jpg
Videolarm: ism5cn

Indoor 6" compact vandal resistant polycarbonate surface mount dome. Clear dome, for an IP Network PTZ camera

The Videolarm ISM5CN Indoor Vandal-Resistant Surface Mount Dome (Clear) protects IP and analog camera systems (fixed and PTZ) against vandalism. Low profile design makes the...

jk-ach13hbn.jpg
Toshiba: jk-ach13hbn

Outdoor Housing (IK-WB30A)

The Toshiba JK-ACH13HBN Camera Enclosure for Box Cameras with Equipped with thermostatically controlled heater/blower and a wall mount and Supports a maximum camera length of...

no-image.jpg
Toshiba: jk-h01a

In-Ceiling Housing (IK-DP30A)

The Toshiba JK-H01A In-Ceiling PTZ Dome Camera Housing (Indoor) is  Use with IK-DP01A/IK-DP02A

jk-mr5c.jpg
Toshiba: jk-mr5c

In-Ceiling Housing with Tinted Dome (IK-WB16A/A-W)

The Toshiba JK-MR5C Camera Enclosure comes with a recessed ceiling mount and clear dome. It is compatible with Toshiba IK-WB16A, IK-WB16A-W, and IK-WB21A IP video surveillance...

no-image.jpg
Toshiba: jk-mr5t

In-Ceiling Housing with Tinted Dome (IK-WB16A/A-W)

The Toshiba JK-MR5T Camera Enclosure comes with a recessed ceiling mount and tinted dome. It is compatible with Toshiba IK-WB16A, IK-WB16A-W, and IK-WB21A IP video surveillance...

jk-phi.jpg
Toshiba: jk-phi

Indoor Pendant Housing-Clear (IK-DP30A)

The Toshiba JK-PHI Indoor Pendant Housing with Clear Lower Dome is designed to house and protect a single fixed camera. It is compatible with the...

no-image.jpg
Toshiba: jk-phit

Indoor Pendant Housing-Tinted (IK-DP30A)

The Toshiba JK-PHIT Indoor Pendant Housing with Tinted Lower Dome is designed to house and protect a single fixed camera. It is compatible with the IK-DP01A and IK-DP02A color PTZ...

jk-pho.jpg
Toshiba: jk-pho

Outdoor Pendant Housing-Clear (IK-DP30A)

The Toshiba JK-PHO Outdoor Pendant Housing with Clear Lower Dome is designed to house and protect a single fixed camera. It is compatible with the IK-DP01A and IK-DP02A color PTZ...

jk-pho12.jpg
Toshiba: jk-pho12

Outdoor Dome Housing (IK-WR12A)

The Toshiba JK-PHO12 Outdoor Housing for IK-WR12A Dome Camera is a vandal-resistant enclosure with cable feed-through and a clear bubble finish. It can be used in outdoor...

no-image.jpg
Toshiba: jk-phot

Outdoor Pendant Housing-Tinted (IK-DP30A)

The Toshiba JK-PHOT Outdoor Pendant Housing-Tinted (IK-DP30A) is Compatible with IK-DP01A and IK-DP02A color PTZ dome cameras and it Includes a fan for cooling the camera in hot...

no-image.jpg
Toshiba: jk-rphi

Indoor Vandal Dome Housing (IK-DP30A)

The Toshiba JK-RPHI Indoor Dome Housing comes to the rescue in monitoring installations that are less attended, like prisons, and schools or areas more prone to...

no-image.jpg
Toshiba: jk-rpho

Outdoor Vandal Dome Housing (IK-DP30A)

The Toshiba JK-RPHO Outdoor Dome Housing comes to the rescue when monitoring an outdoor location where cameras are more susceptible to acts of vandalism and...

jk-sm5c-i.jpg
Toshiba: jk-sm5c-i

Indoor Housing with Clear Dome (IK-WB16A/A-W)

The Toshiba JK-SM5C-I Indoor Housing with Clear Dome is a vandal-resistant enclosure designed for Toshiba IK-WB16A, IK-WB16A-W, and IK-WB21A...

jk-sm5c-o.jpg
Toshiba: jk-sm5c-o

Outdoor Housing with Clear Dome (IK-WB16A/A-W)

The Toshiba JK-SM5C-O Outdoor Housing with Clear Dome is a vandal-resistant enclosure designed for Toshiba IK-WB16A, IK-WB16A-W, and IK-WB21A network cameras....

jk-sm5t-i.jpg
Toshiba: jk-sm5t-i

Indoor Housing with Tinted Dome (IK-WB16A/A-W)

The Toshiba JK-SM5T-I Indoor Housing with Tinted Dome is a vandal-resistant enclosure designed for Toshiba IK-WB16A, IK-WB16A-W, and IK-WB21A network cameras. The...

jk-sm5t-o.jpg
Toshiba: jk-sm5t-o

Outdoor Housing with Tinted Dome (IK-WB16A/A-W)

The Toshiba JK-SM5T-O Outdoor Housing with Tinted Dome is a vandal-resistant enclosure designed for Toshiba IK-WB16A, IK-WB16A-W, and IK-WB21A network cameras....

ldw75c2n.jpg
Videolarm: ldw75c2n

Liberty Series Power Dome

The Videolarm LDW75C2N Freedom Dome Modular All Weather Enclosure is a ruggedized dome enclosure with space for peripheral equipment. This enclosure has a 110 / 220 VAC voltage...

ldw75clg.jpg
Videolarm: ldw75clg

Liberty series wireless dome, 100/240vac in, IP reset, 3/4G

The Videolarm LDW75CLG Liberty Wireless IP Ready Dome is a 3G/4G cellular enclosure, which provides an ideal surveillance solution by controlling existing...

mr5c.jpg
Videolarm: mr5c

Recessed 5" ceiling dome w/decorative trim ring, includes fixed camera bracket, tinted dome

The Videolarm MR5C is a compact dome housing designed to install a CCTV camera inside a hard or drop ceiling. Once installed, only 2.5" of the lower dome with its white trim ring...

mr5t.jpg
Videolarm: mr5t

Recessed 5" ceiling dome w/decorative trim ring, includes fixed camera bracket, tinted dome

The Videolarm MR5T is a compact dome housing designed to install a CCTV camera inside a hard or drop ceiling. Once installed, only 2.5" of the lower dome with its white trim ring...

mr7cl.jpg
Videolarm: mr7cl

7" Recessed Ceiling mount dome hsg, clear dome, plus (1) fixed camera bracket

The Videolarm MR7CL is a low-profile, indoor, recessed, ceiling mount dome housing. It features a 7” (177.8mm) dome camera that accommodates standard-body fixed cameras up to...

Size    9” x 11” x 12.25” (230 x 280 x 312mm)
Weight    10 Lbs. (4.6 Kg.)
Construction - BACK BOX    18-and 20-Gauge Steel
Construction - TRIM RING    19-Gauge Steel
Construction - DOME    OptiClear™ Polycarbonate
mr7tl.jpg
Videolarm: mr7tl

7" Recessed Ceiling mount dome hsg, tinted dome

The Videolarm MR7TL is a low-profile, indoor, recessed, ceiling mount dome housing. It features a 7” (177.8mm) dome camera that accommodates standard-body fixed cameras up to...

ntl1k1000.jpg
Videotec: ntl1k1000

Housing w/ Sunshield and Heater, 110VAC/230VAC (CE Rated, Non-UL), 2.1" Germanium glass

The Videotec NTL1K1000 is Large housing for thermal cameras with Germanium window, different window dimensions: Ø 55mm (2.1in), Ø 70mm (2.8in) and Ø 110mm (4.3in), and is...

ntm1k1000.jpg
Videotec: ntm1k1000

Housing for thermal cameras in aggressive environments

The Videotec NTM1K1000 is Housing for thermal cameras in aggressive environments with Germanium window, 2 PG13,5 cable glands nickel-plated brass for external connections, and is...

ntw cooled.jpg
Videotec: ntw-cooled

Liquid-cooled housing for thermal cameras

The Videotec NTW COOLED is Liquid-cooled housing for thermal cameras Made of AISI 316L electropolished stainless steel, its Designed to operate in high temperature environments,...

nxl large aisi.jpg
Videotec: nxl-large-aisi

Large housing for aggressive environments

The Videotec NXL LARGE AISI is Large housing for aggressive environments that is Made of AISI 316L electropolished stainless steel.   The NXL LARGE AISI has a...

nxm aisi 316.jpg
Videotec: nxm-aisi-316

Housing for installation in aggressive environments

The Videotec NXM AISI 316 Housing for installation in aggressive environment that is Entirely constructed from AISI 316L electropolished stainless steel.   The NXM AISI...

nxm36.jpg
Videotec: nxm36

Housing for installation in aggressive environments

The Videotec NXM36 Housing for installation in aggressive environments with IP66/IP68, submersible down to -40m (-130ft), equal to 4 BAR max pressure, 2 PG13,5 cable glands...

nxw cooled.jpg
Videotec: nxw-cooled

Liquid-cooled housing

The Videotec NXW COOLED is Liquid-cooled housing Made of AISI 316L electropolished stainless steel Steel cylindrical chamber for internal circulation of cooling liquid linked to...

oh081tl.jpg
Videolarm: oh081tl

8" dome, 2 x 2 tile replace, fixed camera bracket, dust cover and liner

The Videolarm OH081TL is an indoor dome housing designed to install in a suspended ceiling, replacing a standard 2 x 2' drop ceiling tile. Once installed, only 4" of the lower...

pfdw75c12n.jpg
Videolarm: pfdw75c12n

IP Ready 7" Outdoor pressurized dome hsg w/WM20G gooseneck wall mount, clear dome

The Videolarm PFDW75C12N is a 7" dome housing that uses air pressure to provide maximum protection against moisture, dust, wind, insects, pollution and other outdoor conditions....

pfdw75c2n.jpg
Videolarm: pfdw75c2n

IP Ready 7" Outdoor pressurized dome hsg w/ WM20G gooseneck wall mount

The Videolarm PFDW75C2N is a 7" network-ready pressurized outdoor housing designed for IP PTZ cameras. The enclosure boasts both pressure and temperature regulation systems. These...

pfdw75c8n.jpg
Videolarm: pfdw75c8n

IP Ready 7" Outdoor pressurized dome hsg w/ WM20G gooseneck wall mount, clear dome

The outdoor PFDW75C8N Pressurized FusionDome Housing from Videolarm eliminates the negative effects of moisture, dirt, and pollution on valuable camera equipment....

pfdw75cf2n.jpg
Videolarm: pfdw75cf2n

IP Ready 7" Outdoor pressurized dome hsg w/ WM20G gooseneck wall mount, clear dome

The Videolarm PFDW75CF2N IP Ready Outdoor Pressurized FusionDome (Clear Dome) comes with a 7" (18 cm) clear dome and protects the IP network fixed camera from moisture, dirt, and...

pfdw75t2n.jpg
Videolarm: pfdw75t2n

IP Ready 7" Outdoor pressurized dome hsg w/ WM20G gooseneck wall mount, tinted dome

The Videolarm PFDW75T2N is an industrial grade outdoor enclosure that can be used to house a professional PTZ camera up to 7" in width. It uses pressurization...

pfdw78c2n.jpg
Videolarm: pfdw78c2n

Outdoor pressurized 7" dome hgs, WM20G, 24vac, H&B, Network, 100va trans, deep

The Videolarm PFDW78C2N protects your surveillance investment while offering an effective monitoring solution. Essential for monitoring ocean shore environments, traffic,...

pfh10c2w.jpg
Videolarm: pfh10c2w

Pressurized tubular housing, 24vac or 12vdc input

The Videolarm  PFH10C2W Fusion Pressurized and Fusion Dust-Proof tubular camera enclosures protect fixed IP cameras and lenses from debris, chemicals and other contaminants,...

pfh10c8wy.jpg
Videolarm: pfh10c8wy

Pressurized tubular housing, dynamic power allocation PoE input

The Videolarm  PFH10C8WY Fusion Pressurized and Fusion Dust-Proof tubular camera enclosures protect fixed IP cameras and lenses from debris, chemicals and other contaminants,...

r360-iv.jpg
Videolarm: r360-iv

Compact recessed ceiling housing for Immervision 360 fixed cameras

The Videolarm R360-IV indoor camera housing provides an easy to install, aesthetically designed, and completely self-contained enclosure for 360 ° panomorph lens compatible box...

rc200c.jpg
Videolarm: rc200c

CCD Wedge Shape Housing

The Videolarm RC200C camera housing is designed to install inside a drop ceiling, replacing a standard 2' x 2' drop ceiling tile. Once installed, the housing can be manually...

rh410.jpg
American Dynamics: rh410

Hsng Kit: indoor, 10" (25.4 cm) max camera/lens, wall mount, tamper resistant

The American Dynamics RH410  is a box camera housing and mount kit for both indoor and outdoor environment to suit your needs and save you

rhiuth.jpg
American Dynamics: rhiuth

Dome housing, indoor, SDU, Top Hat with deluxe trim ring, plenum rated

The RHIUTH  Metal enclosure houses the domes, and include trim ring and plastic base. This housing mounts directly to a ceiling or indoor structure and is plenum...

rhodulp-01.jpg
American Dynamics: rhodulp-01

Dome housing, outdoor, SDU, I/O board, clr bubble, pressurized, White

The RHODULP-01 SpeedDome Ultra Outdoor Housings allows the SpeedDome Ultra to be installed in virtually any environment; available in standard and vandal resistant models. Our...

rhp75c12n.jpg
Videolarm: rhp75c12n

IP Ready 7" Vandal-Resistant Outdoor dome hsg w/pendant mount

The Videolarm RHP75C12N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and integrated...

rhp75c2n.jpg
Videolarm: rhp75c2n

IP Ready 7" Vandal-Resistant Outdoor dome hsg w/pendant mount

The Videolarm RHP75C2N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and integrated heater...

rhp75cf2n.jpg
Videolarm: rhp75cf2n

IP Ready 7" Vandal-Resistant Outdoor dome hsg w/pendant mount

The Videolarm RHP75CF2N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and integrated...

rhp75t2n.jpg
Videolarm: rhp75t2n

IP Ready 7" Vandal-Resistant Outdoor dome hsg w/pendant mount

The Videolarm RHP75T2N is a 7" network-ready pressurized outdoor housing with reinforced materials, making it virtually tamper- proof. The enclosure boasts both pressure and...

rhp75tf2n.jpg
Videolarm: rhp75tf2n

IP Ready 7" Vandal-Resistant Outdoor dome hsg w/pendant mount

The Videolarm RHP75TF2N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and integrated...

rhw75c12n.jpg
Videolarm: rhw75c12n

IP Ready 7" Vandal-Resistant Outdoor dome hsg w/wall mount

The Videolarm RHW75C12N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and...

rhw75c2n.jpg
Videolarm: rhw75c2n

IP Ready 7" Vandal-Resistant Outdoor dome hsg w/wall mount

The Videolarm RHW75C2N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and integrated heater...

rhw75cf2n.jpg
Videolarm: rhw75cf2n

IP Ready 7" Vandal-Resistant Outdoor dome hsg w/wall mount

The Videolarm RHW75CF2N is an outdoor housing for use with fixed analog cameras from Canon and Elmo and many network cameras from AXIS, JVC, Panasonic and Sony. It will also...

rhw75t12n.jpg
Videolarm: rhw75t12n

IP Ready 7” Vandal-Resistant Outdoor dome hsg w/wall mount

The Videolarm RHW75T12N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and integrated...

rhw75t2n.jpg
Videolarm: rhw75t2n

IP Ready 7" Vandal-Resistant Outdoor dome hsg w/wall mount

The Videolarm RHW75T2N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and integrated heater...

rhw75tf2n.jpg
Videolarm: rhw75tf2n

IP Ready 7" Vandal-Resistant Outdoor dome hsg w/wall mount

The Videolarm RHW75TF2N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and integrated...

rhw7cf2.jpg
Videolarm: rhw7cf2

7"Outdoor dome hsg w/wall mount, rugged cast aluminum top and polycarbonate clear dome

The Videolarm RHW7CF2 is a wall mount dome enclosure for housing a single fixed CCTV camera up to 6.5" in length. Constructed of a rugged metal top and equipped with a built-in...

rm7c2n.jpg
Videolarm: rm7c2n

IP Ready 7" Vandal-Resistant Outdoor Recessed dome hsg, w/recessed ceiling mount, clear dome

The Videolarm RM7C2N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and integrated heater...

rm7cf2.jpg
Videolarm: rm7cf2

Outdoor Vandal Resistant recessed housing for fixed cameras, clear 7" dome, 24vac input, heater & blower

The Videolarm RM7CF2 Vandal-Resistant Recessed Ceiling Dome Housing is a outdoor/indoor clear 7" (0.1778 m) dome that supports fixed cameras up...

rm7cf2n.jpg
Videolarm: rm7cf2n

IP Ready 7" Vandal-Resistant Outdoor Recessed dome hsg, w/recessed ceiling mount, clear dome

The Videolarm RM7CF2N is an industrial grade enclosure that can be used to house a professional CCTV camera up to 7" in length. With its rugged construction and integrated heater...

rthoutdr.jpg
American Dynamics: rthoutdr

Hsng kit, includes AD1314-HB24, wall mount, 120 VAC to 24 VAC transformer

This polycarbonate housing provides excellent protection for the installed camera. The unique 180 ° opening of the cover provides full and easy access to the camera and lens for trouble-free...

scu-vac.jpg
Samsung: scu-vac

ANALOG POSITIONING SYSTEM HOUS360 ENDLESS PAN,-85 to 40 TILT

The SCU-VAC is an integrated positioning systems that accept various camera/lens combinations to provide high speed pan & tilt. They offer continuous 360 ° rotation with an...

Input Voltage    24VAC
Power Consumption    Max. 100W
Pan Range    360° Endless
Pan Speed    Preset - 0.1°~120°/sec, Manual - 0.1°~ 36 °/sec (Turbo - 120 °/sec)
Tilt Range    -85°~ 40°
sdp12c.jpg
Videolarm: sdp12c

12" Outdoor/Indoor dome hsg w/pendant mount, clear dome, (1) fixed camera bracket

The Videolarm SDP12C SuperDome-12 12" Indoor Dome with Pendant Mount is a general-purpose dome camera housing for indoor use. It comes with a pendant mount with 1.5" pipe thread...

sdp12chb.jpg
Videolarm: sdp12chb

12" Outdoor dome hsg w/pendant mount, clear dome, 24Vac input, heater/blower/thermostat, (1) fixed camera bracket

The Videolarm SDP12CHB SuperDome-12 12" Outdoor Dome with Pendant Mount is a general-purpose dome camera housing for outdoor use. It comes with a pendant mount with 1.5" pipe...

sdp16c.jpg
Videolarm: sdp16c

16"OUTDOOR CLR PEND MNT HGS & FM1

The Videolarm SDP16C 16” Indoor Dome Housing with Pendant Mount has a clear dome and houses cameras up to 7" (17.78 cm)-long. A fixed camera bracket with security fasteners...

sdp16chb.jpg
Videolarm: sdp16chb

16" OUTDOOR CLR PEND MNT HGS W/24V H&B & FM1

The Videolarm  SDP16CHB SuperDome is a general purpose dome camera housing. This unit is available with either a 12” or 16” dome and comes with a pendant mount. It...

sm5c2n.jpg
Videolarm: sm5c2n

6" compact vandal resistant polycarbonate surface mount dome. Clear domeCompact Vandal-Resistant, Surface-Mount Dome

The Videolarm  SM5C2N 5.9" (149.9mm) Outdoor Vandal-Resistant Surface-Mount Dome (Clear) is designed for use with PTZ camera systems up to 5" (127mm)-long, and features a rugged,...

Size (h*w*d)    8" x 8.5" x 8.4" (203.2 x 215.9 x 213.36mm)
Weight    2.3 Lbs. (1.04 Kg)
Construction - BODY    Polycarbonate
Construction - TRIM RING    Polycarbonate
DOME    Polycarbonate
sm5c8n.jpg
Videolarm: sm5c8n

Compact outdoor surface mount dome for POE plus enabled IP ptz cameras

The Videolarm  SM5C8N Dome enclosure provides a simple and quick installation that reduces project cost. This small form factor enclosure is ideal for indoor fixed dome cameras...

Operating Temperature    -20°F to 120°F (-29°C to 49°C)
Heater Activates At    60°F /-8° (15°C, /-8°)
Heater Deactivates At    80°F /-8° (27°C, /-8°)
Power Requirements    100/240Vac, 50-60 Hz (midspan input)
PoE Power    48-56Vdc, 33 watts (60 watts for FDW75 models)
sm75.jpg
Videolarm: sm75

Vandal-Resistant Surface Mount Dome
The MOOG Videolarm's SM-75 Series offers superior protection against vandalistic attacks. It is also capable of being mounted either facing down or up toward the sky. Constructed of...
Size    11.4" x 10.0" x 11.6" (292 x 287 x 297mm)
Weight    13 Lbs. (6.0 Kg.)
Construction - BODY    Cast Aluminum
Construction - TRIM RING    Cast Aluminum
DOME    Polycarbonate
ssdp75c2n.jpg
Videolarm: ssdp75c2n

Stainless steel dome, pendant mount, 24vac input, heater & blower

The Videolarm  SSDP75C2N Fusion Stainless Steel (SS) Dome is a rugged, anti-corrosive camera enclosure engineered to protect PTZ cameras and lenses in the harshest environments,...

ssdp75c2ny.jpg
Videolarm: ssdp75c2ny

Stainless steel dome, pendant mount, 24vac input, heater & blower, sunshield

The Moog Videolarm SSDP75C2NY Fusion Stainless Steel Outdoor Dome Housing with Heater & Blower ensures that your camera captures clear, uninterrupted footage even...

ssdp75cn.jpg
Videolarm: ssdp75cn

Stainless steel dome, pendant mount, no electronics

The Videolarm  SSDP75CN Fusion Stainless Steel (SS) Dome is a rugged, anti-corrosive camera enclosure engineered to protect PTZ cameras and lenses in the harshest environments,...

ssh10c2y.jpg
Videolarm: ssh10c2y

Stainless steel tubular housing, 24vac input, heater & blower, sunshield

The Moog Videolarm  SSH10C2Y Fusion Stainless Steel Tubular Camera Housing with Heater & Blower ensures that your camera captures clear, uninterrupted footage...

ssh10cy.jpg
Videolarm: ssh10cy

Stainless steel tubular housing, sunshield, no electronics

The Videolarm SSH10CY Fusion Stainless Steel (SS) Tubular Camera Housing is a rugged, anti-corrosive camera enclosure engineered to protect fixed cameras and lenses in the...

sspdp75c2n.jpg
Videolarm: sspdp75c2n

Pressurized Stainless steel dome, pendant mount, 24vac input, heater & blower

The Videolarm  SSPDP75C2N Fusion Stainless Steel (SS) Dome is a rugged, anti-corrosive camera enclosure engineered to protect PTZ cameras and lenses in the harshest environments,...

ulisse maxi.jpg
Videotec: ulisse-maxi

PTZ unit for dynamic monitoring of large outdoor areas

The Videotec ULISSE MAXI is a PTZ unit for dynamic monitoring of large outdoor areas with Variable speed: 0.02 °-20 °/s Pan and Tilt, Horizontal continuous rotation, vertical...

ulisse maxi netcam.jpg
Videotec: ulisse-maxi-netcam

Positioning unit with XL sized housing

The Videotec ULISSE MAXI NETCAM is a Positioning unit with XL sized housing, Direct access to camera web pages via VT Tunneling, Camera and lens maximum allowed weight is 7.6kg,...

ulisse maxi thermal.jpg
Videotec: ulisse-maxi-thermal

Positioning unit with housing for thermal cameras

The Videotec ULISSE MAXI THERMAL is a positioning unit with housing for thermal cameras. The ULISSE MAXI THERMAL has a Germanium window for thermal cameras,...

ulisse netcam thermal.jpg
Videotec: ulisse-netcam-thermal

PTZ thermal cameras and units for highest precision Day/Night monitoring

The Videotec ULISSE NETCAM THERMAL is a PTZ thermal cameras and units for highest precision Day/Night monitoring with Germanium window for thermal cameras, Housing for compact...

ulisse plus-netcam.jpg
Videotec: ulisse-plus-netcam

Outdoor Full IP PTZ unit for Network cameras with medium size lenses

The Videotec ULISSE PLUS NETCAM is an Outdoor Full IP PTZ unit for Network cameras with medium size lenses, Optical sensors for absolute positioning feedback, and Horizontal...

ulisse thermal.jpg
Videotec: ulisse-thermal

Outdoor PTZ thermal cameras and units for highest precision Day/Night monitoring

The Videotec ULISSE THERMAL Outdoor PTZ thermal cameras and units for highest precision Day/Night monitoring with Germanium window for thermal cameras, Horizontal continuous...

ulisse-plus.jpg
Videotec: ulisse-plus

Outdoor PTZ unit for cameras with medium size lenses

The Videotech ULISSE-PLUS is an Outdoor PTZ unit for cameras with medium size lenses, Weatherproof housing for medium/large-size lenses, and has Optical sensors for absolute...

verso compact.jpg
Videotec: verso-compact

Side opening polycarbonate compact housin

The Videotec VERSO COMPACT is a Side opening polycarbonate compact housing with Vandalproof protection (IK10), Pre-arranged for internal cable management bracket,...

verso polycarbonate.jpg
Videotec: verso-polycarbonate

Side opening polycarbonate housings

The Videotec VERSO POLYCARBONATE is a Side opening polycarbonate housing with Vandalproof protection (IK10), Pre-arranged for internal cable management bracket, and has Available...

vs-h60.jpg
Marshall Electronics: vs-h60

Outdoor Housing

The Marshall VS-H60 series are high quality outdoor housing solutions designed for use with Marshall Electronics' line of IP and HD-SDI cameras. They feature solid die cast...

vs-pth-500.jpg
Marshall Electronics: vs-pth-500

Pan Tilt Housing for Exterior Use, NON-HDSDI VS Box Camera

The Marshall Electronics VS-PTH-500 is a rugged weather-proof pan & tilt housing for below and above the horizon viewing with 360 ° panning (endless) capability. The integrated...

vs-pth-550.jpg
Marshall Electronics: vs-pth-550

Pan Tilt Housing IR for Exterior Use, for VS-HDSDI Cameras

The Marshall Electronics VS-PTH-550 is a rugged weather-proof pan & tilt housing for below and above the horizon viewing with 360 ° panning (endless) capability. The integrated...



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.