Search

dfglc4e.jpg
The Imaging Source: DFG-LC4E

4 Inputs Frame Grabber

The Imaging Source DFG-LC4E is a 4 input Frame grabber. This DFG LC4E grabber comes with up to 768x576 pixels and up to 30 images/second.
 


Video formats    PAL/NTSC, RS-170/CCIR
Max resolution    PAL= 768x576 at 25 fps; NTSC= 640x480 at 30 fps
Analog inputs    4xBNC; 0xY/C (S-Video); Multiplexed
Bus interface    32 Bit - PCI 2.1, Bus Mastering
Color formats    YUV 4:2:2, YUV 4:1:1, YUV 4:1:0, RGB 32, RGB 24, RGB 8
dfgmc4pcie.jpg
The Imaging Source: DFG-MC4-PCIE

4 Inputs Frame Grabber

The Imaging Source DFG-MC4-PCIE is a 4 input Frame grabber. This DFG MC4 PCIE grabber comes with up to 768x576 pixels and up to 30 images/second.
 


Video formats    PAL/NTSC, RS-170/CCIR
Max resolution    PAL= 768x576 at 25 fps; NTSC= 640x480 at 30 fps
Analog inputs    4xBNC; 0xY/C (S-Video); Parallel
Bus interface    32 Bit - PCI Express, Bus Mastering
Color formats    YUV 4:2:2, YUV 4:1:1, YUV 4:1:0, RGB 32, RGB 24, RGB 8
dfgsv1.jpg
The Imaging Source: DFG-SV1-LP

3 Inputs Frame Grabber

The Imaging Source DFG-SV1-LP is a 3 input Frame grabber. This DFG SV1 LP grabber comes with up to 768x576 pixels and up to 30 images/second.
 


Video formats    PAL/NTSC, RS-170/CCIR
Max resolution    PAL= 768x576 at 25 fps; NTSC= 640x480 at 30 fps
Analog inputs    2xRCA (cinch); 1xY/C (S-Video); Multiplexed
Bus interface    32 Bit - PCI 2.1, Bus Mastering
Color formats    YUV 4:2:2, YUV 4:1:1, YUV 4:1:0, RGB 32, RGB 24, RGB 8
dfgsv1lppcie.jpg
The Imaging Source: DFG-SV1-LP-PCIE

3 Inputs Frame Grabber

The Imaging Source DFG-SV1-LP-PCIE is a 3 input Frame grabber. This DFG SV1 LP PCIE grabber comes with up to 768x576 pixels and up to 30 images/second.
 
Video formats    PAL/NTSC, RS-170/CCIR
Max resolution    PAL= 768x576 at 25 fps; NTSC= 640x480 at 30 fps
Analog inputs    2xRCA (cinch); 1xY/C (S-Video); Multiplexed
Bus interface    32 Bit - PCI Express, Bus Mastering
Color formats    YUV 4:2:2, YUV 4:1:1, YUV 4:1:0, RGB 32, RGB 24, RGB 8

dfgsv1pcie.jpg
The Imaging Source: DFG-SV1-PCIE

Imaging Source DFG-SV1-PCIE 3 Inputs Frame Grabber

The Imaging Source DFG-SV1-PCIE is a 3 input Frame grabber. This DFG SV1 PCIE grabber comes with up to 768x576 pixels and up to 30 images/second.
 


Video formats    PAL/NTSC, RS-170/CCIR
Max resolution    PAL= 768x576 at 25 fps; NTSC= 640x480 at 30 fps
Analog inputs    2xRCA (cinch); 1xY/C (S-Video); Multiplexed
Bus interface    32 Bit - PCI Express, Bus Mastering
Color formats    YUV 4:2:2, YUV 4:1:1, YUV 4:1:0, RGB 32, RGB 24, RGB 8
aexeon.jpg
DPict Imaging: aexeon

Bus-Mastering Video Acquisition Board For OEM Applications
The dPict Imaging Aexeon is a low-cost, full-featured video frame grabber board for analog camera solutions. Aexeon accepts multiple composite, S-Video, or component ...
RGB 32/24/16/15/8 and YUV 4   2:2 pixel formats
Operating temperature    0° C to 70° C
Relative humidity    5% up to 95% non-condensing
aexeon-quattro.jpg
DPict Imaging: aexeon-quattro

Real-Time 4-channel Video Acquisition And Compression Board
The dPict Imaging Aexeon-Quattro is a low-cost, real-time video acquisition and compression board for applications where multiple video streams are needed. Available in either PCI or ...
RGB 32/24/16/15/8 and YUV 4   2:2 pixel formats
Operating temperature    0° C to 55° C
Relative humidity    5% up to 95% non-condensing
colorado-video-441cs.jpg
Colorado Video: colorado-video-441cs

Video Frame Store, Video Frame Grabber, Video Freeze Frame

The Colorado Video 441CS Video Frame Store, Video Frame Grabber, Video Freeze Frame or Video Memory, is a full frame, high resolution, video memory for NTSC or PAL composite video....

colorado-video-448.jpg
Colorado Video: colorado-video-448

Video Frame Averager, Video Frame Grabber, Video Freeze Frame

The Colorado Video 448S Video Frame Averager, Video Freeze Frame or Video Frame Grabber creates a freeze frame picture image, upon request, representing the average of a selected n...

dominoalpha2.jpg
Euresys: domino-alpha-2

(discontinued) High-Quality Analog Image Acquisition Frame Grabber

This item has been DISCONTINUED.

 

The Domino series is a range of high-end PCI and PCI Express frame grabbers for analog cameras. DOMINO-ALPHA-2
Form factor    32-bit, 33 MHz PCI
Analog cameras    Single-tap = Up to 4, Dual-tap = Up to 2
Video connector    On the bracket = 2 x HD15
Sampling resolution / Max. frequency    Max. line rate operation a = 8 bits @ 32 MHz
Max. line rate    Synchronous mode = 31.5 kHz, Asynchronous mode = 31.5 kHz

harmony.jpg
Euresys: domino-harmony

Analog Image Acquisition Frame Grabber With Perfect Digital Quality

The Domino series is a range of high-end PCI and PCI Express frame grabbers for analog cameras. DOMINO-HARMONY supports any system function associated to industrial acquisition, su...
Form factor    64-bit, 66 MHz PCI
Analog cameras    Single-tap = 2, RGB = 1
Video connector    On the bracket = 2 x HD15, Internally = 1 x 10-pin header
Sampling resolution / Max. frequency    Max. line rate operation a = 10 bits @ 40 MHz
Max. line rate    Synchronous mode = 42 kHz, Asynchronous mode = 31.5 kHz

melody.jpg
Euresys: domino-melody

Analog Image Acquisition Frame Grabber With Perfect Digital Quality

The Domino series is a range of high-end PCI and PCI Express frame grabbers for analog cameras. DOMINO-MELODY supports any system function associated to industrial acquisition, suc...
Form factor    32-bit, 33 MHz PCI, Low Profile compatible
Analog cameras    Single-tap = 1
Video connector    On the bracket = 1 x HD15, Internally = 1 x 10-pin header
Sampling resolution / Max. frequency    Max. line rate operation a = 10 bits @ 40 MHz
Max. line rate    Synchronous mode = 42 kHz, Asynchronous mode = 31.5 kHz

dominosymphony.jpg
Euresys: domino-symphony

High-Speed Analog PCIe Frame Grabber For 4 Single-Tap Cameras

The Domino series is a range of high-end PCI and PCI Express frame grabbers for analog cameras. DOMINO-SYMPHONY supports any system function associated to industrial acquisition, s...
Form factor    x1 PCI Express Full height, half length
Analog cameras    Single-tap = 4
Video connector    On the bracket = 1 x HD44, Internally = 1 x 10-pin header
Sampling resolution / Max. frequency    Max. line rate operation a = 10 bits @ 65 MHz
Max. line rate    Synchronous mode = 52.5 kHz, Asynchronous mode = 52.5 kHz (digital vertical synch.)

10011-001-aexeon.jpg
DPict Imaging: dpict-10011-011

32MB PCI Bus-mastering video acquisition board for general purpose OEM applications

The DPICT 10011-001 Aexeon is a low-cost, full-featured video frame grabber board for analog camera solutions. Aexeon accepts multiple composite, S-Video, or component video inputs...

10012-001-aexeon.jpg
DPict Imaging: dpict-10012-001

Aexeon 32MB PCIe

The DPICT 10012-001 Aexeon is a low-cost, full-featured video acquisition board for analog cameras. Available in either PCI or PCI Express formats, Aexeon incorporates a digital me...

10021-001-aexeon.jpg
DPict Imaging: dpict-10021-001

Aexeon Quattro 64MB PCI BNC

The DPICT 10021-001 Aexeon is a low-cost, full-featured video acquisition board for analog cameras. Available in either PCI or PCI Express formats, Aexeon incorpor...

10022-001-aexeon.jpg
DPict Imaging: dpict-10022-001

Aexeon Quattro 64MB PCIe BNC

The DPICT 10022-001 Aexeon is a low-cost, full-featured video acquisition board for analog cameras. Available in either PCI or PCI Express formats, Aexeon incorporates a digital me...

10031-001 aexeon lt.jpg
DPict Imaging: dpict-10031-001

Aexeon LT PCI Standard bracket

The DPICT 10031-001 Aexeon LT PCI is a low cost, full-featured video frame grabber board for analog camera solutions.  Aexeon LT accepts composit...

10032-001 aexeon lt.jpg
DPict Imaging: dpict-10032-001

Aexeon LT PCIe Standard Bracket

The DPICT 10032-001 Aexeon LT PCI is a low cost, full-featured video frame grabber board for analog camera solutions.  Aexeon LT accepts composite, S-video, both ...

10042001.jpg
DPict Imaging: dpict-10042-001

DPict Imaging 10042-001 Aexeon HD S

The DPICT 10042-001 Aexeon HDS video input circuitry digitizes between multiple component, S-Video, or composite video signals. With plenty of I/O triggers and ext...

10503-001 nvision.jpg
DPict Imaging: dpict-10503-001

nVision 64MB Ethernet

The DPICT 10503-001 nVision from dPict Imaging is a multi-format intelligent video acquisition device for mobile or remote capture. nVision digiti...

10533-001-nvision gx2.jpg
DPict Imaging: dpict-10533-001

nVision GX2 HD, Dual Comp, Ethernet

The DPICT 10533-001 nVision GX2 from dPict Imaging the next-generation multi-format intelligent video acquisition device for mobile or remote capture. nVision GX2 digitizes and tra...

11021-002 nexeon cl.jpg
DPict Imaging: dpict-11021-002

Nexeon CL 64MB PCI

The 11021-002 Nexeon CL is a low-cost, full-featured video frame grabber for digital camera solutions with the Camera Link standard. Nexeon supports the Base configuration of the C...

11042-001 nexeon hd.jpg
DPict Imaging: dpict-11042-001

Nexeon HD PCI Express

The 11042-001 Nexeon HD is a full-featured video frame grabber for high-definition video display and capture. It supports video inputs from standard and HDTV resolutions as well as...

 99503 nvision.jpg
DPict Imaging: dpict-99503

nVision I/O Carrier Board

The 99503 nVision I/O Carrier board provides for standard connections for video, communications, and trigger I/O.


99504 nvision.jpg
DPict Imaging: dpict-99504

nVision GX2 I/O Carrier Board

The 99504 nVision GX2 I/O Carrier board provides for standard connections for video, communications, and trigger I/O


grablink-base.jpg
Euresys: grablink-base

Full-Featured Base Or Lite Camera Link Frame Grabber
The Grablink Full, Grablink DualBase and Grablink Base are state-of-the-art Camera Link frame grabbers representing a complete and competitive offer for machine vision systems. These new Grablink boar...
Form factor    x1 PCI Express, Low profile, half length
Camera Link configuration    Base
Max pixel-clock frequency    24 bits @ 85MHz
Color    RGB and Bayer
Delivery bandwidth    Up to 200 MB/s
grablink-dualbase.jpg
Euresys: grablink-dualbase

Full-Featured Dual Base Or Lite Camera Link Frame Grabber
The Grablink Full, Grablink DualBase and Grablink Base are state-of-the-art Camera Link frame grabbers representing a complete and competitive offer for machine vision systems. These new Grablink boar...
Form factor    x4 PCI Express, Full height, half length
Camera Link configuration    Dual Base
Max pixel-clock frequency    2x24 bits @ 85MHz
Color    RGB and Bayer
Delivery bandwidth    Up to 850 MB/s
grablinkexpress.jpg
Euresys: grablink-express

Cutting-Edge PCI Express Camera Link Image Acquisition Frame Grabber
The Grablink Full, Grablink DualBase and Grablink Base are state-of-the-art Camera Link frame grabbers representing a complete and competitive offer for machine vision systems. These new Grablink boar...
Form factor    x1 PCI Express, Full height, half length
Camera Link configuration    Base PoCL compliant
Max pixel-clock frequency    24 bits @ 85 MHz
Line scan    ADR Technology™
Delivery bandwidth    180 MB/s
grablinkfull.jpg
Euresys: grablink-full

Full-Featured 10-tap, Full, Medium Or Base Camera Link Frame Grabber
The Grablink Full, Grablink DualBase and Grablink Base are state-of-the-art Camera Link frame grabbers representing a complete and competitive offer for machine vision systems. These new Grablink boar...
Form factor    x4 PCI Express, Full height, half length
Camera Link configuration    Base, Medium, Full
Max pixel-clock frequency    24/48/64/80 bits @ 85MHz
Color    RGB and Bayer
Delivery bandwidth    Up to 850 MB/s
grablinkfullxr.jpg
Euresys: grablink-full-xr

Full-Featured 80-bit, Full, Medium or Base Camera Link Frame Grabber
The EURESYS Grablink Full XR - where XR stands for eXtended Reach - is a Camera Link frame grabber for single Camera Link camera applications featuring ECCO . In most cases, ECCO all...
grablinkvalue.jpg
Euresys: grablink-value

Cost-Effective Camera Link Acquisition Frame Grabber
The Grablink Full, Grablink DualBase and Grablink Base are state-of-the-art Camera Link frame grabbers representing a complete and competitive offer for machine vision systems. These new Grablink boar...
Form factor    32-bit, 33 MHz PCI, Full height, half length
Camera Link configuration    Base
Max pixel-clock frequency    24 bits @ 60 MHz
Delivery bandwidth    90 MB/s
On-board memory    8-MB
nexeon-cl.jpg
DPict Imaging: nexeon-cl

Camera Link® Acquisition Board For Area Or Line-Scan Camera
The dPict Imaging Nexeon-CL is a low-cost, full-featured video frame grabber for digital camera solutions with the Camera Link standard. Nexeon supports the Base configuration of the ...
RGB 32/24/16/15/8 and YUV 4   2:2 pixel formats
Operating temperature    0° C to 55° C
Relative humidity    5% up to 95% non-condensing
nexeon-hd.jpg
DPict Imaging: nexeon-hd

High-Definition Acquisition Board For Analog Or Digital Video Inputs
The dPict Imaging Nexeon-HD is a full-featured video frame grabber for high-definition video display and capture. NexeonHD supports analog RGB/YCrCb component, S-Vide...
RGB 32/24/16/15/8, YUV 4   4:4 and YUV 4:2:2
Operating temperature    0° C to 55° C
Relative humidity    5% up to 95% non-condensing
nexeon-hd-xtra.jpg
DPict Imaging: nexeon-hd-xtra

High-Definition Acquisition Board With 3G-SDI And HDTV Input Support
The dPict Imaging Nexeon-HDXtra is a full-featured video frame grabber for high-definition video display and capture. NexeonHDXtra is a full-featured video streaming ...
SMPTE 259M    360 Mb/sec with resolutions up to 960x486 (SDI)
SMPTE 292M    1.485 Gb/sec with resolutions up to 1080i (HD-SDI)
SMPTE 424M    2.97 Gb/sec with resolutions up to 1080p (3G-SDI)
RGB 32/24/16/15/8, YUV 4   4:4 and YUV 4:2:2
Operating temperature    0° C to 70° C
picolo.jpg
Euresys: picolo

Low-Cost Standard Acquisition Frame Grabber

The Euresys PIC-OLO is a top-quality video acquisition card compatible with standard PAL or NTSC cameras. They are dedicated to high-end applications in the fields of video surveil...
PCI interface(s)    32-bit, 33 MHz PCI
Video signals    Interlaced composite PAL/NTSC S-Video interlaced
Video resolution    Square - Broadcast, QCIF => Full D1
Video acquisition rate    Up to 50/60 fps, up to 25/30 ips
Nr. of real time cameras per card    1

picoloalert.jpg
Euresys: picolo-alert-pcie

PCIe video capture card with four BNC connectors for up to 16 standard PAL/NTSC cameras

The Euresys PICOLO ALERT PCIe is a top-quality video acquisition card compatible with standard PAL or NTSC cameras. They are dedicated to high-end applications in the fields of vid...
PCI interface(s)    64-bit, 66 MHz PCI or PCI Express x1
Video signals    Interlaced composite PAL/NTSC
Video resolution    Square - Broadcast, QCIF => Full D1
Video acquisition rate    200/240 fps, up to 100/120 ips constantly available
Nr. of real time cameras per card    4

picolohd_3g.jpg
Euresys: picolo-hd-3g

(discontinued)SDI/HDMI/DVI High-Definition 1080p Video Capture Cards

This product has been discontinued. Please consider another Picolo series product, such as the Picolo Pro...

picolohdh264.jpg
Euresys: picolo-hd-h264

SDI/HDMI/DVI High-Definition 1080p Video Capture Cards

This product has been discontinued. Please consider another Picolo series product, such as the Picolo Pro...

picolohd_one.jpg
Euresys: picolo-hd-one

(discontinued)SDI/HDMI/DVI High-Definition 1080p Video Capture Cards

This product has been discontinued. Please consider another Picolo series product, such as the Picolo Pro...

picolojunior.jpg
Euresys: picolo-junior-4

Low Cost Capture Frame Grabber For Video Surveillance Applications
The Euresys PICOLO-JUNIOR-4 is a top-quality video acquisition card compatible with standard PAL or NTSC cameras. They are dedicated to high-end applications in the fields of video su...
PCI interface(s)    32-bit, 33 MHz PCI
Video signals    Interlaced composite PAL/NTSC
Video resolution    Square - Broadcast, QCIF => Full D1
Video acquisition rate    Up to 50/60 fps, up to 25/30 ips
Nr. of real time cameras per card    1
picolo-pcie.jpg
Euresys: picolo-pcie

Low-Cost Acquisition Frame Grabber
The Euresys PICOLO-PCIe is a top-quality video acquisition card compatible with standard PAL or NTSC cameras. They are dedicated to high-end applications in the fields of video survei...
PCI interface(s)    PCI Express x1 standard- and low-profile brackets
Video signals    Interlaced composite PAL/NTSC S-Video interlaced
Video resolution    Square - Broadcast, QCIF => Full D1
Video acquisition rate    Up to 50/60 fps, up to 25/30 ips
Nr. of real time cameras per card    1
picolopro2.jpg
Euresys: picolo-pro-2

Frame Grabber With Standard Acquisition For Video Surveillance
The Euresys PICOLO-PRO-2 is a top-quality video acquisition card compatible with standard PAL or NTSC cameras. They are dedicated to high-end applications in the fields of video surve...
PCI interface(s)    32-bit, 33 MHz PCI or PCI Express x1
Video signals    Interlaced composite PAL/NTSC
Video resolution    Square - Broadcast, QCIF => Full D1
Video acquisition rate    Up to 50/60 fps, up to 25/30 ips
Nr. of real time cameras per card    1
picolotymo.jpg
Euresys: picolo-tymo

Compact And Cost-effective Video Capture Frame Grabber With 16 Inputs
The Euresys PICOLO-TYMO is a top-quality video acquisition card compatible with standard PAL or NTSC cameras. They are dedicated to high-end applications in the fields of video survei...
PCI interface(s)    32-bit, 66 MHz PCI standard- and low-profile brackets
Video signals    Interlaced composite PAL/NTSC S-Video interlaced
Video resolution    Square - Broadcast, QCIF => Full D1
Video acquisition rate    Up to 200/240 fps, up to 100/120 ips
Nr. of real time cameras per card    4
pixci-a310.jpg
EPIX: pixci-a310

PCIe X4 Frame Grabber For High Resolution, High Quality, Analog Video

The EPIX Analog Video for PCI Express PIXCI-A310 video frame grabber acquires images from monochrome or component RGB color, interlaced or progressive scan, from cameras or other v...
Video Formats    UXGA, WSGA , WXGA, SXGA , SXGA, XGA, SVGA, VGA, RS343, CCIR, RS-170, and others
Supported Resolutions Include    1920x1080p, 1920x1080i, 1280x720p, 720x480p, 720x576p, and others
Bit Depth    30, 24, 10, or 8 bits per pixel
Pixel Clock Range    12 MHz to 165 MHz
Maximum PCIe Data Rate    700 Megabyte per second sustained data transfer

pixci cl1.jpg
EPIX: pixci-cl1

Camera Link Interface

The EPIX Camera Link for PCI PIXCI-CL1 accepts data from a Camera Link camera while providing exposure, reset, and serial control. The PIXCI® CL1 capture and control board reduces...
Resolution    8 to 4,096 pixels per line; 1 to 4,096 lines per image (area scan); 1 to 65,534 lines per image (line scan)
Signals    Differential RS-644; Differential Trigger IN / Strobe OUT; 2 TTL input/outputs
Connections    1 26-pin Camera Link; 1 9-pin D-Subminiature; 2 10-pin headers
Maximum frame rate    Camera Dependent
CE / FCC Certification    PIXCI CL1 was tested per EMC directive 89/336/EEC and performed to class B

pixci cl2.jpg
EPIX: pixci-cl2

64-Bit/66MHz PCI Interface Board For Full, Medium & Base Configuration Camera Link Cameras

The EPIX Camera Link for PCI PIXCI-CL2 frame grabber supports Full, Medium, and Base configuration Camera Link cameras. Compatible with the 64-bit/ 66MHz PCI bus, the CL2 board int...
PCI Bus    64-bit/66MHz or PCI-X

pixci d2x.jpg
EPIX: pixci-d2x

Frame Grabber Supports Over 300 Digital Output Cameras

The EPIX Camera Link for PCI PIXCI-D2X is designed for scientific and machine vision applications that require the highest image quality. To insure that precise camera data is alwa...
Resolution    8 to 4,096 pixels per line, 1 to 4,096 lines per image (area scan), 1 to 65,534 lines per image (line scan)
Signals    Differential RS-644 or RS-422 camera / board signaling (camera dependent). Differential Trigger IN / Strobe OUT 2
Maximum frame rate    Camera Dependent
Connections    1 68-pin (SCSI II) cable receptacle, 2 10-pin headers
CE / FCC Certification    PIXCI D2X was tested per EMC directive 89/336/EEC and performed to class B.

pixci d3x.jpg
EPIX: pixci-d3x

Frame Grabber Supports Over 24 Multi-Channel Digital Output Cameras

The EPIX Camera Link for PCI PIXCI-D3X is a PCI-compatible imaging board supporting camera configurations with 3 to 8 data channels, or with 30 to 64 total data bits - cameras that...
Resolution    8 to 4,096 pixels per line, 1 to 4,096 lines per image (area scan), 1 to 65,534 lines per image (line scan)
Signals    Differential RS-644, Differential Trigger IN / Strobe OUT (Optional "TTL Module" allows TTL Trigger IN and TTL Strobe OUT)
Connections    1 100-pin cable receptacle, 2 10-pin headers
Maximum frame rate    Camera Dependent
CE / FCC Certification    PIXCI D3X was tested per EMC directive 89/336/EEC and performed to class B.

pixci_e104x4.jpg
EPIX: pixci-e104x4

Embedded Camera Link Applications PCIe/104 Frame Grabber

The EPIx PIxCI e104x4 is a PCIe/104 Frame Grabber For Embedded Camera Link Applications.


SIGNAL INPUT & OUTPUT    EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz.
CONNECTIONS    Four 26 pin MDR Camera Link connectors for up to four Base cameras or one or two 10 tap, Full, or Medium cameras.
Two 10 pin headers for trigger inputs and strobe outputs.
BUS REQUIREMENTS    Type 1 Bottom-Stacking PCIe/104 V2.01 With Gen 2.0 Protocol (2.5 to 5 GT/s)
POWER REQUIREMENTS    12 V @ 120 mA
3.3 V @ 720 mA
Total 3.816 Watts
DIMENSIONS    11.56 cm long by 9.59 cm high (4.55"" long x 3.775"" high)
pixci-e4db.jpg
EPIX: pixci-e4db

Dual Base Camera Link Frame Grabber For PCI Express

The EPIX Camera Link for PCI Express PIXCI-E4DB frame grabber connects two Base camera link cameras to the PCI Express bus. The PIXCI E4DB is handled by EPIX software as if two PIX...

pixci-e8.jpg
EPIX: pixci-e8

PCI Express X8 Frame Grabber For High Bandwidth Camera Link Cameras

The EPIX Camera Link for PCI Express PIXCI-E8 is a Camera Link frame grabber supporting the highest data rate cameras. The PIXCI E8 supports more than 900 Extended, Full, Medium, B...

pixci-eb1.jpg
EPIX: pixci-eb1

Low Cost & Profile, PoCL Base Camera Link PCI Express Frame Grabber

The EPIX Camera Link for PCI Express PIXCI-EB1 is a low cost, low profile frame grabber with Power over Camera Link (PoCL). The PIXCI EB1P is compatible with all area scan and line...
Signal Input & Output    EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz
Conections    One 26-pin 3M MDR Camera Link connector for Base. 6-pin connector for Trigger, Frame Enable, and Strobe. Camera Link cables available
Data Transfers    Supports cameras with data output rates up to 250 MBytes/second. 64-bit memory addressing
Bus Requirements    PCI Express x1 slot. Operates in PCI Express x16, x8, x4, or x1 slot
Dimesions    8.38 cm long by 6.88 cm high (3.30" long x 2.71" high)

pixci-eb1mini.jpg
EPIX: pixci-eb1mini

EPIX PIXCI EB1 mini Smallest Camera Link Frame Grabber

The PIXCI EB1mini frame grabber provides a vertical Camera Link SDR connector with FPGA on a single printed circuit board using a full size mini card slot. At the maximum Camera Li...

pixci eb1minif.jpg
EPIX: pixci-eb1minif

Smallest Camera Link Frame Grabber Series

The PIXCI EB1miniF moves the Camera Link connector to a separate board and connects the two with detachable flat ribbon cable. This allows for more mounting options in space constr...

pixci eb1minig.jpg
EPIX: pixci-eb1minig

Smallest Camera Link Frame Grabber Series

The PIXCI EB1miniG has the Camera Link connector on a separate circuit board and connects to the FPGA circuit board with two very flexible cables. This version requires less spac...

pixci eb1minih.jpg
EPIX: pixci-eb1minih

Smallest Camera Link Frame Grabber Series

The PIXCI EB1miniH has an SDR Camera Link connector and FPGA on a separate circuit board for mounting to the side of a small chassis. Two very flexible cables connect to a half len...

pixci-ec1.jpg
EPIX: pixci-ec1

ExpressCard - Notebook Camera Link Frame Grabber

The EPIX Camera Link for ExpressCard PIXCI-EC1 frame grabber supports all Full, Medium, and Base configuration Camera Link cameras with bandwidth requirements of 191 Megabytes (152...

pixci-ecb1.jpg
EPIX: pixci-ecb1

ExpressCard - Notebook Base Camera Link Frame Grabber

The EPIX Camera Link for ExpressCard PIXCI-ECB1 frame grabber supports all Base configuration Camera Link cameras with bandwidth requirements of 191 Megabytes (1528 Mbits) per seco...

pixci-ecb1-34.jpg
EPIX: pixci-ecb1-34

Base Camera Link ExpressCard/34 Frame Grabber

The EPIX Camera Link for ExpressCard PIXCI ECB 134 base Camera Link frame grabber plugs into an ExpressCard/34 or ExpressCard/54 slot in a notebook computer. With 200 megabyte per ...

pixci-ecb2.jpg
EPIX: pixci-ecb2

ExpressCard - Notebook Dual Base Camera Link Frame Grabber

The EPIX Camera Link for ExpressCard PIXCI-ECB2 frame grabber provides two interfaces for any two Base camera link cameras. The PIXCI ECB2 is handled by EPIX' software as if two PI...

pixci-el1.jpg
EPIX: pixci-el1

Low Cost PCI Express X1 Frame Grabber For Camera Link Cameras

The EPIX Camera Link for PCI Express PIXCI-EL1 frame grabber supports Full, Medium, and Base configuration Camera Link cameras. Compatible with the PCI Express x1 (by one) bus, the...

pixci-el1db.jpg
EPIX: pixci-el1db

Dual Base Camera Link Frame Grabber In One PCI Express X1 Expansion Slot

The EPIX Camera Link for PCI Express PIXCI-EL1DB frame grabber provides two interfaces for any two Base camera link cameras. The PIXCI EL1DB is handled by EPIX' software as if two ...

pixci-si2.jpg
EPIX: pixci-si2

Silicon Video Frame Grabbers, Up To 2 Cameras

The EPIX Silicon Video Frame Grabbers PIXCI-SI2 frame grabber provides low cost high resolution capture from two SILICON VIDEO cameras. Two cameras, operating at maximum resolution...
Bus requirements    PCI Express bus x1 thru x16 slot.
Power requirements    1.56 Amps @ 3.3 Volts, 0.21 Amps @ 12 Volts With two SV9T001C 3-megapixel color cameras at 48 MHz pixel clock.
Dimensions (excluding bracket)    3.94 inches long by 2.75 inches high, 100 mm long by 70 mm high (Available with standard or low profile bracket.)
Transfer rates    Provides burst transfer rates, from cameras to on-board memory, up to 280 megabytes per second. Transfer rates from on-board memory through the PCI Express bustypically reach 202 megabytes per second
On-board memory    64 megabytes of frame buffer memory

pixci-si1.jpg
EPIX: pixci-si1

Silicon Video Frame Grabbers, Supports One Camera

The EPIX Silicon Video Frame Grabbers PIXCI-SI2 frame grabber provides low cost high resolution capture from two SILICON VIDEO cameras. Two cameras, operating at maximum resolution...

pixci si4.jpg
EPIX: pixci-si4

Silicon Video Frame Grabbers, Up To 4 Cameras

The EPIX Silicon Video Frame Grabbers PIXCI-SI4 frame grabber supports 1 to 4 SILICON VIDEO cameras. Cameras may be identical or mixed, and can operate simultaneously or independen...

pixci-sv5.jpg
EPIX: pixci-sv5

Analog Video For PCI, 2 BNC And 1 S-Video Multiplexed Inputs

The EPIX Analog Video for PCI PIXCI-SV5 is a video-rate frame grabber that captures high quality, uncompressed, scientific quality digital images from standard analog output video ...
4 Pin DIN    S-Video Input
Two BNC-Jacks    Composite Video Inputs
DB15    TTL I/O Triggers
Color or Monochrome Video Acquisition    S-Video, RS-170, CCIR, NTSC, PAL
Resolution-Pixels    754x480: RS-170, NTSC, S-Video 922x580: CCIR, PAL, S-Video

pixci-sv5a.jpg
EPIX: pixci-sv5a

Analog Video For PCI, 3 Multiplexed BNC Inputs

The EPIX Analog Video for PCI PIXCI-SV5A offers 3 multiplexed BNC inputs. All other features on the PIXCISV5A are identical to the PIXCI SV5.


Capture FIELDs to Double the Capture Rate    If fast capture rate is more important than vertical resolution, then selecting the Field at Field mode doubles a field capture rate while cutting vertical resolution in half. Capture 50 fields per second from a PAL or CCIR camera; capture 60 fields per second from an NTSC or RS-170 camera
Capture FIELDs instead of full Frames    If memory or storage capacity is limited, and field resolution is sufficient, then selecting, Field at Frame allows the capturing of a sequence of fields instead of a sequence of frames (at the camera’s 25 frames per second (fps) PAL/CCIR or 30 fps NTSC/RS-170). The PIXCI SV5 Video Format menu allows resolution selection in single pixel increments for greater control, but Field at Frame offers a simple “one-click” option for added convenience
Capture Frame at Frame    This is the default capture option offering maximum vertical resolution images at the camera’s frame rate. Selected Capture from Three Video Sources using one PIXCI SV5(A): The PIXCI SV5 imaging board features a 3-input video multiplexer that allows signal selection from two BNC and one S-Video input. The PIXCI SV5A allows signal selection from three BNC inputs
Capture from Multiple PIXCI SV5 boards    As many as eight PIXCI® SV5 boards can be installed in one computer allowing selected capture from multiple video sources controlled by a single program. Because the multiplexer on each board allows connection of up to 3 sources, a total of 24 sources can be connected. Simultaneous capture from up to eight sources is possible – subject to the bandwidth constraints of the PCI bus or buses on the selected motherboard. There are motherboards with multiple PCI buses. Each PCI bus has a bandwidth of approximately 110 megabytes per second. Capture Short Sequence with Selected Image Save: The XCAP-Lite imaging program, provided at no charge with the purchase of the PIXCI SV5 imaging board, allows sequence capture into as much as 64 Mbytes of computer memory. Individual images can be saved one at a time
Capture and Save Sequence into PC Memory    The optional XCAP-Ltd imaging program allows maximum resolution and frame rate sequence capture into the computer’s available memory, to a maximum of approximately 3 to 3.5 gigabytes. At full resolution and frame rate, capture a color sequence with duration of 150 seconds, or a monochrome sequence with duration of 300 seconds. Capture and Save Sequence to Hard Drive: The optional XCAP-Std imaging program ($1495) allows maximum resolution and frame rate sequence capture direct to a 7200 rpm drive or to a RAID system. Using a 750 gigabyte drive, XCAP-Std can capture a full resolution uncompressed sequence for up to 5 hours from a color source, or for up to 10 hours from a monochrome source. Longer sequence capture is available with more drives
pixci-sv5b.jpg
EPIX: pixci-sv5b

Analog Video For PCI, 1 BNC Input And 1 Loop Thru BNC Output

The EPIX Analog Video for PCI PIXCI-SV5B offers 1 BNC input and 1 Loop Thru BNC output. The S-Video and trigger connectors are removed to allow for a low-profile PCI form factor wi...
Capture FIELDs to Double the Capture Rate    If fast capture rate is more important than vertical resolution, then selecting the Field at Field mode doubles a field capture rate while cutting vertical resolution in half. Capture 50 fields per second from a PAL or CCIR camera; capture 60 fields per second from an NTSC or RS-170 camera
Capture FIELDs instead of full Frames    If memory or storage capacity is limited, and field resolution is sufficient, then selecting, Field at Frame allows the capturing of a sequence of fields instead of a sequence of frames (at the camera’s 25 frames per second (fps) PAL/CCIR or 30 fps NTSC/RS-170). The PIXCI SV5 Video Format menu allows resolution selection in single pixel increments for greater control, but Field at Frame offers a simple “one-click” option for added convenience
Capture Frame at Frame    This is the default capture option offering maximum vertical resolution images at the camera’s frame rate. Selected Capture from Three Video Sources using one PIXCI SV5(A): The PIXCI SV5 imaging board features a 3-input video multiplexer that allows signal selection from two BNC and one S-Video input. The PIXCI SV5A allows signal selection from three BNC inputs
Capture from Multiple PIXCI SV5 boards    As many as eight PIXCI® SV5 boards can be installed in one computer allowing selected capture from multiple video sources controlled by a single program. Because the multiplexer on each board allows connection of up to 3 sources, a total of 24 sources can be connected. Simultaneous capture from up to eight sources is possible – subject to the bandwidth constraints of the PCI bus or buses on the selected motherboard. There are motherboards with multiple PCI buses. Each PCI bus has a bandwidth of approximately 110 megabytes per second. Capture Short Sequence with Selected Image Save: The XCAP-Lite imaging program, provided at no charge with the purchase of the PIXCI SV5 imaging board, allows sequence capture into as much as 64 Mbytes of computer memory. Individual images can be saved one at a time
Capture and Save Sequence into PC Memory    The optional XCAP-Ltd imaging program allows maximum resolution and frame rate sequence capture into the computer’s available memory, to a maximum of approximately 3 to 3.5 gigabytes. At full resolution and frame rate, capture a color sequence with duration of 150 seconds, or a monochrome sequence with duration of 300 seconds. Capture and Save Sequence to Hard Drive: The optional XCAP-Std imaging program ($1495) allows maximum resolution and frame rate sequence capture direct to a 7200 rpm drive or to a RAID system. Using a 750 gigabyte drive, XCAP-Std can capture a full resolution uncompressed sequence for up to 5 hours from a color source, or for up to 10 hours from a monochrome source. Longer sequence capture is available with more drives

pixci-sv5l.jpg
EPIX: pixci-sv5l

Analog Video For PCI, 2 Mini BNC And 1 S-Video Multiplexed Inputs

The EPIX Analog Video for PCI PIXCI-SV5L offers 2 Mini BNC and 1 S-Video multiplexed inputs. The PIXCISV5L trigger connector has been removed to allow for a low-pr...
Capture FIELDs to Double the Capture Rate    If fast capture rate is more important than vertical resolution, then selecting the Field at Field mode doubles a field capture rate while cutting vertical resolution in half. Capture 50 fields per second from a PAL or CCIR camera; capture 60 fields per second from an NTSC or RS-170 camera
Capture FIELDs instead of full Frames    If memory or storage capacity is limited, and field resolution is sufficient, then selecting, Field at Frame allows the capturing of a sequence of fields instead of a sequence of frames (at the camera’s 25 frames per second (fps) PAL/CCIR or 30 fps NTSC/RS-170). The PIXCI SV5 Video Format menu allows resolution selection in single pixel increments for greater control, but Field at Frame offers a simple “one-click” option for added convenience
Capture Frame at Frame    This is the default capture option offering maximum vertical resolution images at the camera’s frame rate. Selected Capture from Three Video Sources using one PIXCI SV5(A): The PIXCI SV5 imaging board features a 3-input video multiplexer that allows signal selection from two BNC and one S-Video input. The PIXCI SV5A allows signal selection from three BNC inputs
Capture from Multiple PIXCI SV5 boards    As many as eight PIXCI® SV5 boards can be installed in one computer allowing selected capture from multiple video sources controlled by a single program. Because the multiplexer on each board allows connection of up to 3 sources, a total of 24 sources can be connected. Simultaneous capture from up to eight sources is possible – subject to the bandwidth constraints of the PCI bus or buses on the selected motherboard. There are motherboards with multiple PCI buses. Each PCI bus has a bandwidth of approximately 110 megabytes per second. Capture Short Sequence with Selected Image Save: The XCAP-Lite imaging program, provided at no charge with the purchase of the PIXCI SV5 imaging board, allows sequence capture into as much as 64 Mbytes of computer memory. Individual images can be saved one at a time
Capture and Save Sequence into PC Memory    The optional XCAP-Ltd imaging program allows maximum resolution and frame rate sequence capture into the computer’s available memory, to a maximum of approximately 3 to 3.5 gigabytes. At full resolution and frame rate, capture a color sequence with duration of 150 seconds, or a monochrome sequence with duration of 300 seconds. Capture and Save Sequence to Hard Drive: The optional XCAP-Std imaging program ($1495) allows maximum resolution and frame rate sequence capture direct to a 7200 rpm drive or to a RAID system. Using a 750 gigabyte drive, XCAP-Std can capture a full resolution uncompressed sequence for up to 5 hours from a color source, or for up to 10 hours from a monochrome source. Longer sequence capture is available with more drives

pixci-sv5s.jpg
EPIX: pixci-sv5s

Analog Video For PCI, 2 BNC And 1 S-Video Multiplexed Inputs

The EPIX Analog Video for PCI PIXCI-SV5S offers 2 BNC and 1 S-Video multiplexed inputs. The PIXCISV5S adds additional circuitry that separates the vertical sync. f...
Capture FIELDs to Double the Capture Rate    If fast capture rate is more important than vertical resolution, then selecting the Field at Field mode doubles a field capture rate while cutting vertical resolution in half. Capture 50 fields per second from a PAL or CCIR camera; capture 60 fields per second from an NTSC or RS-170 camera
Capture FIELDs instead of full Frames    If memory or storage capacity is limited, and field resolution is sufficient, then selecting, Field at Frame allows the capturing of a sequence of fields instead of a sequence of frames (at the camera’s 25 frames per second (fps) PAL/CCIR or 30 fps NTSC/RS-170). The PIXCI SV5 Video Format menu allows resolution selection in single pixel increments for greater control, but Field at Frame offers a simple “one-click” option for added convenience
Capture Frame at Frame    This is the default capture option offering maximum vertical resolution images at the camera’s frame rate. Selected Capture from Three Video Sources using one PIXCI SV5(A): The PIXCI SV5 imaging board features a 3-input video multiplexer that allows signal selection from two BNC and one S-Video input. The PIXCI SV5A allows signal selection from three BNC inputs
Capture from Multiple PIXCI SV5 boards    As many as eight PIXCI® SV5 boards can be installed in one computer allowing selected capture from multiple video sources controlled by a single program. Because the multiplexer on each board allows connection of up to 3 sources, a total of 24 sources can be connected. Simultaneous capture from up to eight sources is possible – subject to the bandwidth constraints of the PCI bus or buses on the selected motherboard. There are motherboards with multiple PCI buses. Each PCI bus has a bandwidth of approximately 110 megabytes per second. Capture Short Sequence with Selected Image Save: The XCAP-Lite imaging program, provided at no charge with the purchase of the PIXCI SV5 imaging board, allows sequence capture into as much as 64 Mbytes of computer memory. Individual images can be saved one at a time
Capture and Save Sequence into PC Memory    The optional XCAP-Ltd imaging program allows maximum resolution and frame rate sequence capture into the computer’s available memory, to a maximum of approximately 3 to 3.5 gigabytes. At full resolution and frame rate, capture a color sequence with duration of 150 seconds, or a monochrome sequence with duration of 300 seconds. Capture and Save Sequence to Hard Drive: The optional XCAP-Std imaging program ($1495) allows maximum resolution and frame rate sequence capture direct to a 7200 rpm drive or to a RAID system. Using a 750 gigabyte drive, XCAP-Std can capture a full resolution uncompressed sequence for up to 5 hours from a color source, or for up to 10 hours from a monochrome source. Longer sequence capture is available with more drives

pixci-sv7.jpg
EPIX: pixci-sv7

Epix PIXCI SV7 Dual Composite Video Express Bus Frame Grabber

The EPIX Analog Video for PCI Express PIXCI-SV7 digitizes analog video from one or two standard composite video cameras (NTSC, RS-170, PAL or CCIR). The two inputs are independent,...
Camera video formats    TSC, RS-170, PAL or CCIR

pixci_sv8.jpg
EPIX: pixci-sv8

Color & Monochrome Analog Video Frame Grabber

The EPIx PIxCI SV8 is a Frame grabber for color and monochrome analog video: S-Video, NTSC, PAL, RS-170, CCIR.


Video connections    One S-Video input.
Four HD-BNC inputs.
Six optional video inputs.
Trigger and I/O Header    Trigger in and out.
Frame Enable in and out.
Dual GPIO in and out.
Eight optional ins or outs.
Bus    PCI Express x1 or wider.
Power Requirements    12 V @ 70 mA
3.3 V @ 390mA
Total 2.127 Watts
Dimensions    3.45 inches long by 2.713 inches high.
(8.67 cm long by 6.89 cm high).