Search

asr-hd.gif
Middle Atlantic: asr-hd-series

Heavy-Duty Slide Out Rotating Shelving System
The Middle Atlantic ASR-HD-Series maximum useable depth shall be 19”. Wood finish shall be black and constructed of 3/4" & 1" thick 45 lb. density industrial MDF board with...
ax-sx-10.jpg
Middle Atlantic: ax-sx-10

10 SP EQUIPMENT ACCESS SYSTEM, 25" EXTENSION, 20" DEEP FRAME

This Middle Atlantic AXS System for Millwork and In-Wall AX-SX-10 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling. Rack mounts on...

ax-sx-20.jpg
Middle Atlantic: ax-sx-20

20 SP EQUIPMENT ACCESS SYSTEM, 25" EXTENSION, 20" DEEP FRAME

This Middle Atlantic AXS System for Millwork and In-Wall AX-SX-20 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling. Rack mounts on...

ax-sx-30.jpg
Middle Atlantic: ax-sx-30

30 SP EQUIPMENT ACCESS SYSTEM, 25" EXTENSION, 20" DEEP FRAME

This Middle Atlantic AXS System for Millwork and In-Wall AX-SX-30 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and...

ax-sx-40.jpg
Middle Atlantic: ax-sx-40

40 SP EQUIPMENT ACCESS SYSTEM, 25" EXTENSION, 20" DEEP FRAME

This Middle Atlantic AXS System for Millwork and In-Wall AX-SX-40 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling. Rack mounts on...

axsxr.gif
Middle Atlantic: ax-sxr-series

24.25" Wide Enclosure
The Middle Atlantic AX-SXR-Series rough-in millwork useable frame depth for installed components shall be from 25-1/2" to 27-1/2" depending on setback from millwork, and rack shall...
axsoutwlsm.jpg
Middle Atlantic: axs-series

Equipment Access Rack For Millwork And In Wall
The Middle Atlantic AXS-Series shall be constructed of the following materials: top, base, caster brackets, and horizontal braces shall be 13-gauge steel with black powder coat...
Available in 2 extension lengths    25" or 48".
axs-15.jpg
Middle Atlantic: axs-15

System for Millwork and In-Wall

This Middle Atlantic AXS System for Millwork and In-Wall AXS-15 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling....

axs-16.jpg
Middle Atlantic: axs-16

System for Millwork and In-Wall

This Middle Atlantic AXS System for Millwork and In-Wall AXS-16 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling. Rack mounts on...

axs-17.jpg
Middle Atlantic: axs-17

Millwork and In-Wall

This Middle Atlantic AXS System for Millwork and In-Wall AXS-17 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling....

axs-18.jpg
Middle Atlantic: axs-18

AXS System for Millwork and In-Wall

This Middle Atlantic AXS System for Millwork and In-Wall AXS-18 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling. Rack mounts on...

axs-19.jpg
Middle Atlantic: axs-19

System for Millwork and In-Wall AXS-19

This Middle Atlantic AXS System for Millwork and In-Wall AXS-19 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling. Rack mounts on...

axs-20.jpg
Middle Atlantic: axs-20

AXS System for Millwork and In-Wall

This Middle Atlantic AXS System for Millwork and In-Wall AXS-20 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling. Rack mounts on...

axs-30.jpg
Middle Atlantic: axs-30

System for Millwork and In-Wall

This Middle Atlantic AXS System for Millwork and In-Wall AXS-30 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling....

axs-40.jpg
Middle Atlantic: axs-40

40 SPACE EQUIPMENT ACCESS SYSTEM, 48 1/2” EXTENSION, 20” DEEP FRAME

This Middle Atlantic AXS System for Millwork and In-Wall AXS-40 is a versatile, high-capacity rack that offers unrestricted rear access to equipment and cabling. Rack mounts on...

bgr4532.jpg
Middle Atlantic: bgr-series

23" Wide Enclosure
The Middle Atlantic BGR-Series shall come equipped with two pairs of fully adjustable steel rackrail with tapped 10-32 mounting holes in universal EIA spacing, black e-coat finish...
Fully welded construction provides the following weight capacities   
c5_3phases2.jpg
Middle Atlantic: c5-series

Credenza Rack
The Middle Atlantic C5-Series credenza Rack shall be available in 1, 2 or 3 bay configurations. Usable height shall be 14 rackspaces per bay. Rack frames shall ship...
cfr.jpg
Middle Atlantic: cfr-series

Welded Cabinet Frame Rack
The Middle Atlantic CFR-Series rack shall be constructed of the following materials: top and bottom shall be 16-gauge steel, rackrail shall be constructed of 11-gauge steel...
cfr-10-16.jpg
Middle Atlantic: cfr-10-16

Cabinet Frame Rack (10 Space)

The CFR-10-16 from Middle Atlantic is a low-profile 10 space cabinet frame rack that allows you to install rack equipment in cabinets, credenzas, and other pieces of furniture....

cfr-11-16.jpg
Middle Atlantic: cfr-11-16

11 SPACE (19 1/4"), CABINET FRAME RACK, 16 DEEP

The CFR-11-16 from Middle Atlantic is a low-profile 11 space cabinet frame rack that allows you to install rack equipment in cabinets, credenzas, and other pieces of furniture....

cfr-12-16.jpg
Middle Atlantic: cfr-12-16

12 SPACE (21"), CABINET FRAME RACK, 16 DEEP

The CFR-12-16 from Middle Atlantic is a low-profile 12 space cabinet frame rack that allows you to install rack equipment in cabinets, credenzas, and other pieces of furniture....

cfr-13-16.jpg
Middle Atlantic: cfr-13-16

13 SPACE (22 3/4"), CABINET FRAME RACK, 16 DEEP

The CFR-13-16 from Middle Atlantic is a low-profile 13 space cabinet frame rack that allows you to install rack equipment in cabinets, credenzas, and other pieces of furniture....

cfr-14-16.jpg
Middle Atlantic: cfr-14-16

14 SPACE (24 1/2"), CABINET FRAME RACK, 16 DEEP

The CFR-14-16 from Middle Atlantic is a low-profile 14 space cabinet frame rack that allows you to install rack equipment in cabinets, credenzas, and other pieces of furniture....

cfr-8-16.jpg
Middle Atlantic: cfr-8-16

8 SPACE (14"), CABINET FRAME RACK, 16 DEEP

The CFR-8-16 from Middle Atlantic is a low-profile 8 space cabinet frame rack that allows you to install rack equipment in cabinets, credenzas, and other pieces of furniture. The...

cfr-9-16.jpg
Middle Atlantic: cfr-9-19

9 SPACE (15 3/4"), CABINET FRAME RACK, 16 DEEP

The CFR-9-16 from Middle Atlantic is a low-profile 9 space cabinet frame rack that allows you to install rack equipment in cabinets, credenzas, and other pieces of furniture. The...

ck.gif
Middle Atlantic: ck-series

Vertical Steel Cable Ducts
The Middle Atlantic CK-Series fits all 45 space.

The CK is 6" wide x 9" deep.
cwr.jpg
Middle Atlantic: cwr-series

Data Wall Cabinet
The Middle Atlantic CWR-Series has center section and back pan shall be 16-gauge steel, phosphate pre-treated and finished in a black textured powder coat. Rackrail shall be...
Four useable depths available    15”, 20”, 24” and 30”.
dlbx.jpg
Middle Atlantic: dlbx-series

Wall Mount Lockbox
The Middle Atlantic DLBX-Series overall dimensions shall be 23.87” W x 11.34” H x 28.24” D. Lockbox shall be constructed of fully welded 16-gauge steel. Mechanically interlocking...
dr.jpg
Middle Atlantic: dr-series

Desktop Rail Racks
The Middle Atlantic DR-Series are quickly and inexpensively organize desktop processing and test equipment with our new DR series desktop rail racks.

The...
drk.jpg
Middle Atlantic: drk-series

30" Wide Enclosure Built-In Cable Ducts
The Middle Atlantic DRK-Series has fully welded construction shall provide a static load capacity of 10,000 lbs. and a UL Listed 2,500 lb. weight capacity. Enclosure shall...
Fully welded construction provides   
Static load capacity    10,000 lbs.
UL Listed load capacity    2,500lbs.
Seismic Certified load capacity    815 lbs.
Seismic certified to the following codes and standards    2007 & 2010 CBC; 2006, 2009
dtrk.jpg
Middle Atlantic: dtrk-series

Desktop Rack
The Middle Atlantic DTRK-Series shall come equipped with two pairs of steel rackrail with tapped 10-32 mounting holes in universal EIA spacing, black e-coat finish and numbered...
dwr.jpg
Middle Atlantic: dwr-series

Sectional Wall Mount Rack
The Middle Atlantic DWR-Series shall be constructed to swing open for component cabling access, center section shall pivot for either left or right opening.. Center section and...
Seismic certified to the following codes and standards    2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition)
egr_rack.jpg
Middle Atlantic: egr-series

23" Stand-Alone Enclosures
The Middle Atlantic EGR-Series welded construction shall provide a static load capacity of 10,000 lbs. and a UL Listed 2,500 lb. weight capacity. Top and bottom shall be 14-gauge...
Fully welded construction provides the following weight capacities - UL Listed load capacity    2,500 lbs - Static load capacity: 10,000 lbs. - Seismic certified load capacity: 900 lbs.
erk.gif
Middle Atlantic: erk-series

22" Wide Economical Enclosure
The Middle Atlantic ERK-Series weight capacity shall be 2,500 lbs. Rack shall be constructed of the following materials: top and bottom shall be 16-gauge steel, horizontal braces...
Seismic certified to the following codes and standards    2007 & 2010 CBC; 2006, 2009
erk.gif
Middle Atlantic: erk-kd-series

22" Wide Ready-To-Assemble Stand-Alone Enclosure
The Middle Atlantic ERK-KD-Series weight capacity shall be 1,000 lbs. [453kg]. Rack shall be constructed of the following materials: top and bottom shall be 14-gauge...
ewr.jpg
Middle Atlantic: ewr-series

Economical Sectional Wall Mount Rack
The Middle Atlantic EWR-Series weight capacity shall be 150 lbs. Tool-Free Quick-MountTM system shall enable one-person installation. Center section and backpan shall be 16-gauge...
frs1000.jpg
Nitek: frs1000

Fiber equipment sub rack and 100 watt linear power supply

The FRS1000 fiber equipment sub rack can be configured to support any combination of Nitek fiber transmitters or receivers from any one of the four series available. A wide...

hpm.jpg
Middle Atlantic: hpm-series

Hinged Panel Mount Adjustable Depth
The Middle Atlantic HPM-Series shall be Middle Atlantic Products HPM-x (x = # of rackspaces). HPM shall be constructed of the following materials: rack and continuous hinge...
idf.jpg
Middle Atlantic: idf-series

Overhead Top Hanging Rack
The Middle Atlantic IDF-Series overall dimensions of enclosure shall be 23.52" W x 28.73" D x (24.125", 31.125") H. Enclosure shall be constructed of the following materials: top...
isrk.jpg
Middle Atlantic: isrk-series

Desk Rolling Mobile Presentation Rack
The Middle Atlantic ISRK-Series overall dimensions shall be 23” W x 26.875”H x 26” D. ISRK shall be constructed of 18-gauge steel, scuff resistant Glide-AwayTM front door shall...
rkbrk.jpg
Middle Atlantic: laminated-racks

Black Wood Grain
The Middle Atlantic Laminated-Racks rackrail shall be equipped with one set of 11-gauge steel with tapped 10-32 holes in universal EIA spacing (2 sets included for racks with 22”...
middle atlantic d2.jpg
Middle Atlantic: middle-atlantic-d2

2 SPACE (3 1/2") RACK DRAWER, BLACK BRUSHED FINISH

The MIDDLE ATLANTIC D2   Rack Drawer (Black Brushed) is part of     modular rack systems.   This two-space drawer is fully enclosed with inside dimensions...

middle atlantic d3.jpg
Middle Atlantic: middle-atlantic-d3

3 SPACE (5 1/4") RACK DRAWER, BLACK BRUSHED FINISH

The MIDDLE ATLANTIC D3 Rack Drawer (Black Brushed) is part of the modular rack systems.   This three-space drawer is fully enclosed with inside dimensions...

middle atlantic d4.jpg
Middle Atlantic: middle-atlantic-d4

4 SPACE (7") RACK DRAWER, BLACK BRUSHED FINISH

The MIDDLE ATLANTIC D4 Space Rack Drawer (Black Brushed) is part of the modular rack systems.   This four-space drawer is fully enclosed with inside dimensions measuring 15.9"...

middle atlantic d5.jpg
Middle Atlantic: middle-atlantic-d5

5 SPACE (8 3/4") RACK DRAWER, BLACK BRUSHED FINISH

The MIDDLE ATLANTIC D5 5-Space Rack Drawer (Black Brushed) is of the modular rack systems.   This five-space drawer is fully enclosed with...

mk.jpg
Middle Atlantic: mk-series

Cable Management Rack
The Middle Atlantic MK-Series overall dimensions of cable management rack shall be 84.28” H x 23.96” W x (16.44”, 24.00”) D, depth of rail channels shall be (6.44”, 14.00”),...
2 mounting depths available    16-7/16" (6-3/8" useable) and New! 24" (14" useable)
MK-1945-24 shall be seismic certified to the following codes and standards    2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) "D". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 500 lbs.
mrk_l.gif
Middle Atlantic: mrk-series

22" Wide Enclosure
The Middle Atlantic MRK-Series welded construction shall provide a static capacity of 10,000 lbs. and a UL Listed load capacity of 2,500 lbs. Rack shall be constructed of the...
Fully welded construction provides the following weight capacities   
pcd.jpg
Middle Atlantic: pcd-series

Vertical Cable Ducts Plastic Fingers
The Middle Atlantic PSD-Series shall be constructed of interior grade rigid PVC and include a hinged plastic cover.

The PSD shall be RoHS EU...
ppm812.jpg
Middle Atlantic: ppm-series

Pivoting Panel Mount
The Middle Atlantic PPM-Series shall be 16-gauge steel, phosphate pre-treated with a durable black powder coat. Rackrail shall be 11-gauge steel with tapped 10-32 holes in...
Available in 3 depths    6", 12" & 18".
ptrkb.jpg
Middle Atlantic: ptrk-series

Portable Rolling Rack
The Middle Atlantic PTRK-Series rack shall have a 500 lb. weight capacity. Rack shall be of fully welded construction. Top, bottom and sides of PTRK-__ (refer to chart) shall be...
r2.jpg
Middle Atlantic: r2-series

Seismic Certified 19" Open Frame Racks
The Middle Atlantic R2-Series rack shall be welded and include two 3-1/4” wide, 11-gauge steel vertical channels with 10-32 tapped mounting holes with marked rackspace increments...
Seismic certified to the following codes and standards    2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) "D". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 850 lbs.
r4124524b.jpg
Middle Atlantic: r4-series

Four Post Open Frame Rack
The Middle Atlantic R4-Series rack shall provide a static load capacity of 2,500 lbs. (threaded rail), 2,000 lbs. (cage nut rail) and a UL listed load capacity of 800 lbs. Rack...
Robust design provides the following weight capacities   
UL listed load capacity    800 lbs.
Static load capacity    2,500 lbs. (threaded rail), 2,000 lbs. (cage nut rail)
rdr.jpg
Middle Atlantic: rdr-series

Residential Designer Rack
The Middle Atlantic RDR-Series shall provide a weight capacity of capacity of 800 lbs. Rack shall be constructed of the following materials: top shall be 1-1/8” thick black...
reb18rotate.jpg
Middle Atlantic: reb-series

Slide Out Rotating Base
The Middle Atlantic REB-Series shall have overall depth of (14”, 18”). Equipment base shall mount within customer-supplied cabinet or entertainment center using included...
rl.gif
Middle Atlantic: rl-series

2 Post Steel Open Frame Rack
The Middle Atlantic RL-Series weight capacity shall be 800 lbs., evenly distributed with the base securely fastened, and 1600 lbs., evenly distributed with the base of the rack...
rla19124sm.jpg
Middle Atlantic: rla-series

2 Post Aluminum Open Frame Racks
The Middle Atlantic RLA-Series rack shall ship unassembled and include two 3” wide, 3/16” thick extruded aluminum vertical channels with mounting holes tapped 12-24 on EIA...
UL Listed Load Capacity    400 lbs.
sbx.jpg
Middle Atlantic: sbx-series

Economical Fixed Wall Rack
The Middle Atlantic SBX-Series shall be constructed of the following materials: top and bottom shall be 16-gauge steel, sides and door shall be 18-gauge steel, all rack elements...
sfr.jpg
Middle Atlantic: sfr-series

Effective, Open Wall Mount Racks
The Middle Atlantic SFR-Series shall be constructed of the following materials: backpan shall be 14-gauge steel with durable black powder coat finish, rackrail shall be 11-gauge...
slim2.jpg
Middle Atlantic: slim-2m-series

Desktop Racks
The Middle Atlantic Slim-2M-Series Desktop Turret Rack shall be Middle Atlantic Products model # 2(6,10)M. Desktop Turret Rack shall offer (6,10) rackspaces. SLIM-2M racks assemble...
slim5_1.gif
Middle Atlantic: slim-5-series

19" Gangable Ready-to-assemble Equipment Rack
The Middle Atlantic Slim-5-Series shall have a static load capacity of 1,000 lbs. and a UL Listed 400 lb. weight capacity. Slim 5 series rack shall be of...
spm.jpg
Middle Atlantic: spm-series

Economical Low Profile Wall Rack
The Middle Atlantic SPM-Series rack shall have three position adjustable rackrail to allow for three combinations of front clearance and useable depth. Rackrail can be set flush...
sr.jpg
Middle Atlantic: sr-series

Large Pivoting Wall Rack
The Middle Atlantic SR-Series shall be constructed of the following materials: top and base shall be 14-gauge steel, center section and backpan shall be 16-gauge steel and all...
Seismic certified to the following codes and standards    2007 & 2010 CBC;
srs.jpg
Middle Atlantic: srs-series

Slide Out Rail System
The Middle Atlantic SRS-Series rackrail shall be finished in black e-coat with marked rackspaces. SRS rough-in pan shall be 14-gauge steel. Finish on SRS assembly shall be...
srsr.jpg
Middle Atlantic: srsr-series

Slide Out Rotating Rail System
The Middle Atlantic SRSR-Series rack shall pull out (19" or 23") on integrated ball bearing slides and rotate 90º for equipment servicing. Detachable rack allows for off-site...
swr.jpg
Middle Atlantic: swr-series

Shallow Wall Rack
The Middle Atlantic SWR-Series overall dimensions shall be 23.44” W x 25.13”/32.13” H x 12.5” D. Weight capacity shall be 150 lbs. Center section and backpan shall be constructed...
stor.jpg
Middle Atlantic: tor-series

Tilt Out Wall Mount Rack
The Middle Atlantic TOR-Series overall dimensions shall be 24.5” W x 30.2” H x XX” D. TOR rack shall be constructed of 18-gauge steel, ears and fascia shall be constructed of...
Two models available    surface mount or flush between studs.
vcd1045dc.jpg
Middle Atlantic: vcd-series

Vertical Cable Ducts Wire Fingers
The Middle Atlantic VCD-Series will dress cables from the front and rear, and includes two locking doors for hiding bundles from view.

The VCD...
vlbx.jpg
Middle Atlantic: vlbx-series

Time-Lapse VTR Lockboxes
The Middle Atlantic VLBX-Series lockbox shall be constructed of fully welded 16-gauge steel. Mechanically interlocking top provides added security and removes easily for equipment...
vmrk.gif
Middle Atlantic: vmrk-series

22" Wide 54 Space Extra Tall Enclosure
The Middle Atlantic VMRK-Series fully welded construction provides a static load capacity of 10,000 lbs. and a UL Listed 2,500 lb. weight capacity. Top and bottom shall be 14-gauge...
Fully welded construction provides   
Static load capacity    10,000 lbs.
UL Listed load capacity    2,500 lbs.
Seismic Certified load capacity    640 lbs.
Seismic certified to the following codes and standards    2007 & 2010 CBC; 2006, 2009
vpm.jpg
Middle Atlantic: vpm-series

Vertical Panel Mount
The Middle Atlantic VPM-Series mounts horizontally or vertically allowing versatile component placement.

This VPM can accommodate all depths of...
vrk.jpg
Middle Atlantic: vrk-series

22" Wide Enclosure With Cable Lacing Bars
The Middle Atlantic VRK-Series rack shall be Middle Atlantic Products model # VRK-44 (31,36)H. Suffix of LRD shall indicate a model without the standard vented latching rear door....
Fully welded construction provides   
Static load capacity    10,000 lbs.
UL Listed load capacity    2,500 lbs.
Seismic Certified load capacity    845 lbs.
Seismic certified to the following codes and standards    2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) "D". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 740 lbs. when used with VRK-Z4 seismic floor anchor brackets.
wm.jpg
Middle Atlantic: wm-series

Open Frame Wall Rack
EIA/TThe Middle Atlantic WM-Series shall be constructed of the following materials: top and bottom shall be 14-gauge steel, rackrail shall be 11-gauge steel with tapped 10-32...
wmrktempdec.jpg
Middle Atlantic: wmrk-series

24" Wide Configured Server Enclosure
The Middle Atlantic WMRK-Series welded construction shall provide a static capacity of 10,000 lbs. and UL Listed load capacity of 2,500 lbs. Rack shall be constructed of the...
Fully welded construction provides the following weight capacities    UL Listed load capacity:
wr4422open.jpg
Middle Atlantic: wr-series

Roll Out Rotating System In Steel Host Enclosure
The Middle Atlantic WR-Series rack shall be of fully welded construction. Weight capacity shall be 750 lbs. when 1/2 of total equipment weight is mounted in lower 1/3 of the rack....
wrk24mdk.gif
Middle Atlantic: wrk-series

Stand-alone Equipment Rack
The Middle Atlantic WRK-Series welded construction shall provide a static load capacity of 10,000 lbs. and a UL Listed 2,500 lb. weight capacity. Top and bottom shall be 14-gauge...
wrk-sa.jpg
Middle Atlantic: wrk-sa-series

24.25" Wide Enclosure
The Middle Atlantic WRK-SA-Series fully welded construction shall provide a static load capacity of 10,000 lbs. and a UL Listed 2,500 lb. weight capacity. Top and bottom shall be...
Fully welded construction provides   
Static load capacity    10,000 lbs.
UL Listed load capacity    2,500 lbs.
Seismic Certified load capacity    900 lbs.
Seismic certified to the following codes and standards    2007 & 2010 CBC; 2006,
wrp.jpg
Middle Atlantic: wrp-series

Low Profile Wall Mount Cabinet, Plexi Top Cover
The Middle Atlantic WRP-Series body and backpan of rack shall be constructed of 18-gauge steel, rackrail shall be 11-gauge steel with threaded 10-32 holes in universal EIA...
wrs.jpg
Middle Atlantic: wrs-series

Low-Profile Wall Rack
The Middle Atlantic WRP-Series body and backpan of rack shall be constructed of 18-gauge steel, rackrail shall be 11-gauge steel with threaded 10-32 holes in universal EIA...


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.