Search
https://www.avsupply.com/images/logos/kramer-logo.gif
Kramer Sierra Video Audio Video Equipment
Video & Computer Signal Processing Solutions
101l.jpg
Kramer: 101l

1:1 Composite Video Line Amplifier
The 101-L is a high-performance line amplifier for composite video signals. The 101 L provides controls to compensate for signal loss inherent in long cable...
Input    1 Composite Video on A Bnc Connector, 1vpp/75Ω
Output    1 Composite Video on A Bnc Connector, 1vpp/75Ω
Max. Output Level    2.5vpp
Bandwidth    500mhz
Diff. Gain    0.03%
102mx.jpg
Kramer: 102mx

2 Channel Stereo Audio Mixer

The 102-MX is a high-performance 2-channel stereo audio mixer for line level and mic level audio signals. The 102 MX mixes one line level input with either a...

Inputs    Mic/line 1: 10mV/1.6kΩ, 1Vpp/10kΩ, on 6.5mm phone connector; Line 2: 1Vpp/10kΩ, stereo on RCA connectors
Outputs    Line level, stereo, up to 5.6Vpp/150Ω on RCA connectors
Bandwidth (-3dB)    100kHz
Gain Range    -12dB to 68.5dB (mic); -12dB to 8.8dB (line 1)
Diff. Phase    0.05Deg
102xl.jpg
Kramer: 102xl

2 Channel Balanced Mono Audio Mixer

The 102-xl is a high-performance 2-channel mono audio mixer for balanced line level and mic level mono audio signals. The 102 xl mixes two mono inputs and...

Inputs    2 line/mic balanced mono on XLR (F) connectors
Output    1 line/mic balanced mono on an XLR (M) connector
Max. Output Level    18Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    Line: 91.5dB Mic: 62.5dB, 1kHz
103av.jpg
Kramer: 103av

1:3 Composite Video & Stereo Audio Distribution Amplifier

The 103-AV is a compact distribution amplifier for composite video and unbalanced stereo audio signals. The 103 AVtakes one input, provides correct buffering and...

Inputs    1 Composite Video, 1Vpp/75Ω on an RCA Connector; 1 Unbalanced Stereo Audio, 1Vpp/33kΩ, on 3.5 Mm Mini Jack
Outputs    3 Composite Video, 1Vpp/75Ω on RCA Connectors; 3 Unbalanced Stereo Audio, 1Vpp/150Ω on 3.5mm Mini Jacks
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    320MHz
Audio Bandwidth (-3dB)    20kHz
104ln.jpg
Kramer: 104ln

1:4 Composite Video Differential Line Amplifier

The 104-LN is a high-performance line amplifier for composite or SDI video signals. The 104 LN includes differential circuitry to help eliminate noise often found...

Input    1 Video, Differential, 1Vpp/75Ω, on A BNC Connector
Outputs    4 Composite Video, 1Vpp/75Ω on BNC Connectors
Max. Output Level    1.6Vpp
Bandwidth (-3dB)    423MHz
Diff. Gain    0.22%
104r.jpg
Kramer: 104r

1:4 RF Distribution Amplifier

The 104-R is a high-performance distribution amplifier for RF signals. The 104 R takes one RF (CATV/MATV) signal and distributes it to four identical outputs.

Input    1 RF, 0.5Vpp/75Ω (max.) on an "F" type connector
Outputs    4 RF, 0.5Vpp/75Ω (max.) on "F" type connectors
Bandwidth    40MHz to 3000MHz ( /-3dB)
Coupling    AC
RF Gain    6dB typical across band
105a.jpg
Kramer: 105a

1:5 Stereo Audio Distribution Amplifier

The 105-A is a high-performance distribution amplifier for unbalanced stereo audio signals. The 105 A takes one stereo input and distributes the signal to five...

Input    1 unbalanced stereo/balanced mono, 1Vpp/33k#8486; on a 3.5mm mini jack
Outputs    5 unbalanced stereo/balanced mono, 1Vpp/50Ω on 3.5mm mini jacks
Max. Output    5Vpp
Audio Bandwidth (-3dB)    20kHz
S/N Ratio    80dB unweighted
105v.jpg
Kramer: 105v

1:5 Composite Video Distribution Amplifier

The 105-V is a high-performance distribution amplifier for composite video signals. The 105 V takes one input, provides correct buffering and isolation and...

Input    1 Video, 1Vpp/75Ω on an RCA Connector
Outputs    5 Video, 1Vpp/75Ω on RCA Connectors
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    400MHz
Diff. Gain    0.1%
105vb.jpg
Kramer: 105vb

1:5 Composite Video Distribution Amplifier

The 105-VB is a high-performance distribution amplifier for composite video signals. The 105 VB takes one input, provides correct buffering and isolation and...

Input    1 Composite Video, 1Vpp/75Ω on A BNC Connector
Outputs    5 Composite Video, 1Vpp/75Ω on BNC Connectors
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    400MHz
Diff. Gain    0.1%
106.jpg
Kramer: 106

1:2 Microphone Line & Distribution Amplifier

The 106 is a high-quality distribution amplifier for balanced mono microphone signals. The 106 takes one dynamic or condenser microphone input and distributes the...

input    1 balanced mono microphone on a 3-pin terminal block connector
Outputs    2 balanced mono line outputs on 3-pin terminal block connectors
Max. Output Level    27Vpp (22dBu)
Bandwidth    >40kHz
S/N Ratio    81dB
123vxl.jpg
Kramer: 123vxl

1:3 Composite Video Differential Line Amplifier

The 123-Vxl is a high-performance line amplifier for composite or SDI video signals. The 123 Vxl includes controls and circuitry to compensate for signal losses...

Input    1 Looping Video, Differential, 1Vpp/75Ω on A BNC Connector
Outputs    3 Video, 1Vpp/75Ω on BNC Connectors
Max. Output Level    1.7Vpp
Bandwidth (-3dB)    425MHz
Diff. Gain    0.5%
401c.jpg
Kramer: 401c

S-Video To Composite Video Format Converter

The 401-C is a high-performance format converter for s-Video (Y/C) signals. The 401 C converts an s-Video input to two composite and two s-Video (Y/C) outputs...

Input    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector
Outputs    2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors
Max. Output Level    1.4Vpp
Video Bandwidth (-3dB)    160MHz (Y)
Non-Linearity    0.05%
401dn.jpg
Kramer: 401dn

Composite Video To S-Video Format Converter

The 401-DN is a high-performance format converter for composite video signals. The 401 DN converts a composite video input to an s-Video (Y/C)

Input    1 composite video, 1Vpp/75Ω on a BNC connector
Output    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector
Video Bandwidth    3.5MHz
Diff. Gain    0.8%
Diff. Phase    0.1Deg
482xl.jpg
Kramer: 482xl

Balanced/Unbalanced Stereo Audio Transcoder

The 482-xl is a high-performance audio transcoder for balanced and unbalanced stereo audio signals. The 482 xl simultaneously converts balanced stereo signals to...

Input    1 unbalanced audio stereo on a 3-pin terminal block connector; 1 balanced audio stereo on a 5-pin terminal block
Output    1 balanced audio stereo on a 5-pin terminal block connector; 1 unbalanced audio stereo on a 3-pin terminal block connector
Max. Output Level    Balanced: 21dBu; unbalanced: 21dBu @max gain
Bandwidth (-3dB)    >100kHz
Controls    -57dB to 6dB (balanced to unbalanced level); -16dB to 19dB (unbalanced to balanced level)
4x1v.jpg
Kramer: 4x1v

4x1 Composite Video Mechanical Switcher

The 4x-1V is a high-performance switcher for composite video signals. the 4x 1V switches any one of four signals to a single output.

Inputs    4 video, 1Vpp/75Ω on RCA connectors
Output    1 composite or single component video, 1Vpp/75Ω on an RCA connector
Bandwidth (-3dB)    400MHz
Switching System    Mechanical, break-before-make
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
4x1vb.jpg
Kramer: 4x1vb

4x1 Composite Video Mechanical Switcher

The 4x1-VB is a high-performance switcher for composite video signals. The 4x1 VB switches any one of four signals to a single output.

Input    4 video, 1Vpp/75Ω on BNC connectors
Output    1 composite or single component video, 1Vpp/75Ω on a BNC connector
Bandwidth (-3dB)    400MHz
Switching System    Mechanical, break-before-make
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
4x4a.jpg
Kramer: 4x4a

4x1:4 Stereo Audio Switcher
The 4x4-A is a high-performance switcher for stereo audio signals. The 4x4 A switches any one of four input signals simultaneously to four identical outputs.
Inputs    4 unbalanced stereo audio, 1Vpp/33kΩ on 3.5mm mini jacks
Outputs    4 unbalanced stereo audio, 1Vpp/220Ω typical on 3.5mm mini jacks
Max Output Level    5.2Vpp ( 7dBu)
Audio Bandwidth (-3dB)    100kHz
S/N Ratio    90dB
602r-t.jpg
Kramer: 602r-t

Detachable DVI Optical Transmitter & Receiver

The 602R/T are a small and lightweight fiber optic transmitter and receiver pair for DVI signals. The 602 T converts electrical signals to optical signals and the...

Inputs    DVI IN (602T), 2 LC optical connectors (602R)
Outputs    2 LC optical connectors (602T), DVI OUT (602R)
Resolution    Up to WUXGA @60Hz (1.65Gbps)
Power Source    5V DC, <500mA
Dimensions    3.9cm x 6.9cm x 1.5cm (1.5" x 2.83" x 0.75") W, D, H
610r-t.jpg
Kramer: 610r-t

Detachable DVI Optical Transmitter & Receiver

The 610R/T are a detachable optical transmitter and receiver for sending DVI signals with resolutions of up to 1920x1200 at 60Hz over LC optical cable. The 610 T...

Input    DVI IN (610T), 4 LC optical connectors (610R)
Output    4 LC optical connectors (610T), DVI OUT (610R)
Resolution    Up to WUXGA @60Hz (1.65Gbps)
Humidity    Operating: 5% to 65%; Storage 5% to 95%
Power Source    5V DC, <500mA
611r.jpg
Kramer: 611r

Composite Video Optical Receiver

The 611T and 611-R are a high-performance fiber optic transmitter and receiver for composite video signals. The 611T transmitter converts a composite video signal into a fiber...

Input    Fiber optic ST connector
Output    Composite Video 1Vpp/75Ω on a BNC connector
Operation Distance    Up to 5km (MultiMode)
Video Bandwidth (-3dB)    55 MHz. 20 MHz
Diff. Gain    0.4%
611t.jpg
Kramer: 611t

Composite Video Optical Transmitter

The 611-T is a high-performance fiber optic transmitter for composite video signals. The 611 T transmitter converts a composite video signal into a fiber optic...

Input    Composite video, 1Vpp/75Ω on a BNC connector
Output    Fiber optic ST connector, G62.5/125um (recommended) or G50/125um multimode fiber optic cable
Operation Distance    Up to 5km (multimode)
Video Bandwidth (-3dB)    55MHz
Diff. Gain    0.4%
613r-t.jpg
Kramer: 613r-t

3G HD-SDI Mini Optical Receiver & Transmitter

The 613R/T is a receiver/transmitter pair for digital video signals up to 3G HD-SDI. The 613R/T pair consists of two compunents; the 613T...

Inputs    SDI, HD-SDI, 3G HD-SDI on a 75Ω BNC connector (613T); 1 fiber optic ST connector (613R)
Outputs    1 fiber optic ST connector (613T); SDI, HD-SDI, 3G HD-SDI on a 75Ω BNC connector (613R)
Maximum Data Rate    Up to 3Gbps
Maximum Range    30km (18.6 Miles) @1080p, 3G-SDI format
Format    SMPTE 424M (3G-SDI); SMPTE 292M (HD-SDI); SMPTE 259M (SD-SDI, SDI, DVB-ASI)
614r-t.jpg
Kramer: 614r-t

DVI Optical Trans & Receiver

The 614T and 614R are a small and lightweight, detachable optical transmitter and receiver pair. They transmit uncompressed DVI resolutions of up to 1920x1200 at...

616r-t.jpg
Kramer: 616r-t

DVI Optical Trans & Receiver

The 616T and 616R are a small and lightweight, detachable fiber optic transmitter and receiver pair. They transmit uncompressed resolutions of up to WQXGA...

621r.jpg
Kramer: 621r

DVI Optical Receiver

The 621R is an optical receiver for DVI signals up to 1920x1200 at 60Hz. The 621T converts a DVI signal into an optical signal and the 621R converts the optical...

Input    4 LC optical connectors for R, G, B & clock. 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
Output    DVI-D on a DVI-I connector
Bandwidth    1.65Gbps
Power Source    12V DC, 1.25A
Dimensions    12cm x 8.05cm x 2.75cm (4.72" x 3.17" x 1.08") W, D, H
621t.jpg
Kramer: 621t

DVI Optical Transmitter

The 621T is an optical transmitter for DVI signals up to 1920x1200 at 60Hz. The 621T converts a DVI signal into an optical signal and the 621R converts the...

Input    DVI-D on a DVI-I connector
Output    4 LC optical connectors for R, G, B & Clock. 1 CAT 5 (RJ-45) for DDC and HDCP bidirectional data
Bandwidth    1.65Gbps
Power Source    12V DC, 500mA
Dimensions    12cm x 8.05cm x 2.75cm (4.72" x 3.17" x 1.08") W, D, H
622r.jpg
Kramer: 622r

Dual Link DVI Optical Receiver

The 622T and 622R are an optical transmitter and receiver pair for dual link DVI signals with resolutions up to 2560x1600 at 60Hz. The 622T converts a DVI signal into an optical...

Input    8 simplex (or 4 duplex) LC optical connectors, 2 red, 2 green, 2 blue, & 2 clock; 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
Output    DVI-D on a DVI-I connector
Bandwidth    3.3Gbps
Power Source    12V DC, 200mA
Dimensions    21.4cm x 10.35cm x 4.36cm (8.4" x 4.07" x 1.71") W, D, H
622t.jpg
Kramer: 622t

Dual Link DVI Optical Transmitter

The 622T and 622R are optical transmitter and receivers for dual link DVI signals with resolutions up to 2560x1600 at 60Hz. The 622T converts a DVI signal into an...

Input    DVI-D on a DVI-I connector
Output    8 simplex (or 4 duplex) LC optical connectors, 2 red, 2 green, 2 blue & 2 clock; 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
Bandwidth    3.3Gbps
Power Source    12V DC, 200mA
Dimensions    21.4cm x 10.35cm x 4.36cm (8.4" x 4.07" x 1.71") W, D, H
6241hd.jpg
Kramer: 6241hd

HD-SDI Switcher

The 6241-HD is a high-performance switcher for HD-SDI serial digital video signals. The 6241 HD takes any one of four HD-SDI inputs, provides reclocking and...

Inputs    4 SMPTE 259M/344M serial digital video inputs (75Ω) on BNC connectors
Outputs    1 SMPTE 259M/344M serial digital video output (75Ω) on BNC connectors
Max. Data Rate    1.485Gbps
Max. Output Level    800mVpp/75Ω
Equalization    Automatic equalization for losses on 75Ω coaxial cable
6241hdxl.jpg
Kramer: 6241hdxl

4x1 3G HD-SDI Switcher

The 6241-HDxl is a high-performance switcher for 3G HD-SDI video signals. The 6241 HDxl takes any one of four 3G HD-SDI inputs, provides reclocking and...

Inputs    4 SMPTE 259M/344M serial digital video inputs (75Ω) on BNC connectors
Outputs    1 SMPTE 259M/344M serial digital video output (75Ω) on BNC connectors
Max. Data Rate    2.97Gbps
Max. Output Level    800mVpp/75Ω
Equalization    Automatic equalization for losses on 75Ω coaxial cable
6241n.jpg
Kramer: 6241n

4x1 SDI Switcher

The 6241-N is a high-performance switcher for serial digital video signals. The 6241 N takes any one of four SDI inputs, provides reclocking and equalization, and...

Inputs    4 SMPTE 259M/344M serial digital video inputs (75Ω) on BNC connectors
Outputs    1 SMPTE 259M/344M serial digital video output (75Ω) on BNC connectors
Max. Data Rate    540Mbps
Max. Output Level    800mVpp/75Ω
Equalization    Automatic equalization for losses on 75Ω coaxial cable
6410n.jpg
Kramer: 6410n

Digital Audio To Balanced Stereo Audio Format Converter

Inputs    4 digital audio inputs: AES-3id on a terminal block connector; AES/EBU on a BNC connector; S/PDIF on an RCA connector; TOSLINK® optical connector
Outputs    2 analog outputs: balanced line out on detachable terminal blocks; 3.5mm headphone jack
Sample Rate Conversion    32kHz, 44.1kHz, 48kHz, 96kHz
Conversion Gain    12dB, 16dB, 20dB, 24dB
Bandwidth ( 4dBu/-3dBu)    20Hz to 22kHz
6420n.jpg
Kramer: 6420n

Balanced Stereo Audio To Digital Audio Format Converter

Input    1 analog input balanced line in (10k) on detachable terminal blocks
Outputs    4 digital audio outputs: AES-3id on a BNC connector; AES/EBU on a terminal block connector; S/PDIF on an RCA connector; TOSLINK® optical connector
Sample Rate Conversion    32kHz, 44.1kHz, 48kHz, 96kHz
Max. Input Level    11.2Vpp @1kHz
Conversion Gain    -12dB, -16dB, -20dB, -24dB
6502.jpg
Kramer: 6502

4x1:2 S/PDIF Switcher

The 6502 is a high-performance switcher for S/PDIF digital audio signals. The 6502 takes any one of four inputs, provides reclocking and equalization and...

Inputs    4 digital audio S/PDIF on RCA connectors
Outputs    2 digital audio S/PDIF on RCA connectors
Sampling Rate    32kHz to 192kHz
Standards    CP1201, IEC 60958, AES3ID and S/PDIF
Dimensions    12cm x 6.95cm x 2.44cm (4.72" x 2.74" x 0.96") W, D, H
6505.jpg
Kramer: 6505

1:5 S/PDIF Distribution Amplifier

The 6505 is a high-performance distribution amplifier for S/PDIF digital audio signals. The 6505 takes one S/PDIF input and distributes the signal to five...

Input    1 S/PDIF digital audio input on an RCA connector
Outputs    5 S/PDIF digital audio outputs on RCA connectors
Standards    CP1201, IEC-60958, AES-3id and S/PDIF
Sample Rate    32kHz to 192kHz
Input Impedance    75Ω
650r.jpg
Kramer: 650r

DVI Over Coax Receiver

The 650R is a high-performance receiver for DVI, RS-232, and IR signals. The 650T converts the input signals to five coax signals and the 650R converts them back...

Inputs    5 BNC connectors
Outputs    1 DVI connector
Ports    IR on 3.5mm mini jack, RS-232 on 9-pin D-sub connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Power Source    12V DC, 330mA
650t.jpg
Kramer: 650t

DVI Over Coax Transmitter

The 650T is a high-performance transmitter for DVI, RS-232 and IR signals. The 650T converts the input signals to five coax signals and the 650R converts them...

Inputs    1 DVI connector
Outputs    5 BNC connectors
Ports    IR on 3.5mm mini jack, RS-232 on 9-pin D-sub connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Power Source    12V DC, 330mA
670r.jpg
Kramer: 670r

HDMI Over Fiber Optic Receiver

The 670R is a high-performance fiber optic receiver for HDMI signals. The 670R receives an optical signal from the 670T and converts the light pulses back to an...

Inputs    1 optical connector
Outputs    HDMI connector
Bandwidth    Supports up to 3.5Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3, using fiber optic communication links and DDC2B
Extension Limit    1700m (>5570 feet) for 1080p/60Hz
670t.jpg
Kramer: 670t

HDMI Over Fiber Optic Transmitter

The 670T is a high-performance fiber optic transmitter for HDMI signals. The 670T converts an HDMI signal to light pulses that it transmits over one single fiber...

Inputs    HDMI connector
Outputs    1 optical connector
Bandwidth    Supports up to 3.5Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3, using fiber optic communication links and DDC2B
Extension Limit    1700m (>5570 feet) for 1080p/60Hz
671r.jpg
Kramer: 671r

DVI Over Fiber Optic Receiver

The 671T and 671R are a high-performance fiber optic transmitter/receiver duo for DVI signals. The unit converts a DVI signal to light pulses that are transmitted over one single...

Inputs    1 optical connector
Outputs    DVI connector
Data Rate    Up to 1.65Gbps
Extension Limit    2000m (>6560 feet) for UXGA (1600x1200) and 1080p
Fiber-Optic Connection    SC connectors for multimode (OM3) fiber cable
671t.jpg
Kramer: 671t

DVI Over Fiber Optic Transmitter

The 671T is a high-performance fiber optic transmitter for DVI signals. The 671T converts a DVI signal to light pulses that are transmitted over one single fiber...

Inputs    DVI connector
Outputs    Optical connector
Data Rate    Up to 1.65Gbps
Extension Limit    2000m (>6560 feet) for UXGA (1600x1200) and 1080p
Fiber-Optic Connection    SC connectors for multimode (OM3) fiber cable
673r-t.jpg
Kramer: 673r-t

4-Channel 3G HD-SDI Over Single Fiber Optic Transmitter & Receiver

The 673RT are a high-performance fiber optic transmitter and receiver pair for video signals up to 3G HD-SDI and dual link HD-SDI signals. The 673R/T duo consists...

Inputs    3G HD-SDI/HD-SDI/Dual-link SDI serial video, 75Ω on BNC connectors (673T); 1 optical connector (673R)
Outputs    1 optical connector (673T); 3G HD-SDI/HD-SDI/Dual-link SDI serial video, 75Ω on BNC connectors (673R)
Bandwidth    Up to 3Gbps for each SDI input
Fiber Optic Extension    Up to 1000m (>3200ft) for 3G HD-SDI
Input Cable Equalization (673T)    140m for HD-SDI, 120m for 3G HD-SDI
6808hdxl.jpg
Kramer: 6808hdxl

3G HD-SDI AES De-Embedder

The 6808HDxl is a high-performance audio de-embedder for 3G HD-SDI video signals. The 6808 HDxl can de-embed two selectable AES audio streams.

Input    1 SD/HD/3G HD-SDI
Outputs    1 SD/HD/3G HD-SDI, 2 AES/EBU audio on BNC connectors
Power Source    5V DC, 390mA
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 3.0" x 1.0") W, D, H
Weight    0.3kg (0.7lbs)
6810hdxl.jpg
Kramer: 6810hdxl

3G HD-SDI Audio Embedder & De-embedder

The 6810HDxl is a high-performance audio embedder and de-embedder for 3G HD-SDI video signals. The 6810 HDxl can embed and de-embed four AES/3id audio streams.

Inputs    1 x SD/HD/3G HD-SDI, 1 x SD/HD/3G HD-SDI loop, 4 x AES/3id on BNC connectors
Outputs    1 x SD/HD/3G HD-SDI, 4 x AES/3id on BNC connectors
Sample Rate Conversion    48kHz
Power Source    5V DC, 1.04A
Dimensions    21.5cm x 16.3cm x 4.4cm (8.6" x 7" x 1.8") W, D, H
690r.jpg
Kramer: 690r

3G HD−SDI Fiber Receiver

The 690R is a high−performance fiber optic receiver for SDI video signals up to 3G HD−SDI. The 690T converts two 3G HD−SDI signals to single−mode fiber optic...

690t.jpg
Kramer: 690t

3G HD−SDI Fiber Transmitter

The 690T is a high−performance fiber optic transmitter for SDI video signals up to 3G HD−SDI. The 690T converts two 3G HD−SDI signals to single−mode fiber...

705xl.jpg
Kramer: 705xl

Composite Video Over Twisted Pair Branching Transmitter

The 705xl is a twisted pair transmitter for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the 706xl...

Input    1 composite video 1Vpp/75Ω on a BNC connector; 1 loop 1Vpp/75Ω on a BNC connector
Output    2 twisted pair outputs on terminal block connectors
Bandwidth (-3dB)    108MHz (-3dB)
Diff. Gain (PAIR)    0.08%
Diff. Phase (PAIR)    0.07Deg
706xl.jpg
Kramer: 706xl

Composite Video Over Twisted Pair Branching Receiver

The 705xl and 706-xl are a twisted pair transmitter and receiver for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the...

Input    1 twisted pair input on terminal block connectors; 1 loop on terminal block connectors
Output    2 composite video 1Vpp/75Ω on BNC connectors
Bandwidth (-3dB)    108MHz (-3dB)
Diff. Gain (PAIR)    0.08%
Diff. Phase (PAIR)    0.07Deg
711n.jpg
Kramer: 711n

Composite Video & Stereo Audio Over Twisted Pair Transmitter

The 711-N is a twisted pair transmitter for composite video and unbalanced stereo audio signals. The 711 N transmitter converts composite video and stereo audio...

Input    1 composite video 1Vpp/75Ω, on a BNC connector; 1 stereo unbalanced audio 4dBu/50kΩ, on two RCA connectors
Output    1 RJ-45 CAT 5 shielded connector (LINE OUT)
Video Max. Signal Level    2.8Vpp
Audio Max. Signal Level    7.6Vpp
Video Bandwidth (-3dB)    85MHz
712n.jpg
Kramer: 712n

Composite Video & Stereo Audio Over Twisted Pair Receiver

The 712-N is a twisted pair receiver for composite video and unbalanced stereo audio signals. The 711N transmitter converts composite video and stereo audio to a twisted pair...

Input    1 RJ-45 CAT 5 shielded connector (LINE IN)
Output    1 composite video 1Vpp/75Ω, on a BNC connector; 1 stereo unbalanced audio 4dBu/50kΩ, on two RCA connectors
Video Max. Signal Level    2.8Vpp
Audio Max. Signal Level    7.6Vpp
Video Bandwidth (-3dB)    85MHz
717.jpg
Kramer: 717

1 BNC M/M Cable 15'

The 717 is a twisted pair (TP) transmitter for composite video and unbalanced stereo audio signals. The unit converts composite video and stereo audio signals into a twisted pair...

7408.jpg
Kramer: 7408

SDI To Multi-Format Analog Video Format Converter & Processor

The 7408 is a format converter for SDI (SMPTE 259M) signals. It converts an SDI video signal to composite video and s-Video (Y/C), or component (YUV)

Input    1 SDI: SMPTE-259M, ITU-R BT.601 on a BNC connector
Outputs    1 reclocked SDI: SMPTE-259M, ITU-R BT.601 on a BNC connector; 1 composite video: 1Vpp/75Ω on a BNC connector; 1 s-Video: 1Vpp, 0.3Vpp/75Ω on two BNC connectors;1 component video (Y, U and V) on three BNC connectors
Bandwidth (-3dB)    5.7MHz
Diff. Gain    <1%
Diff. Phase    <1Deg
7508.jpg
Kramer: 7508

Multi-Standard Composite Video & S-Video To SDI Format Converter

The 7508 is a multi-format converter for composite video or s-Video (Y/C) signals. It converts either PAL, SECAM, and NTSC composite or s-Video (Y/C) signals into two SDI video...

Input    1 composite video, 1Vpp/75Ω on a BNC connector; 1 s-Video, 1Vpp, 0.3Vpp/75Ω on a 4-pin connector
Output    2 SDI SMPTE-259M, ITU-R BT.601 on BNC connectors
Digital Resolution    10 bits
Bandwidth    5MHz (-0.2dB)
Signal to Noise Ratio    57dB
810.jpg
Kramer: 810

Composite Video & S-Video Color Bar/Audio Tone Generator

The 810 is a high-performance composite video and s-Video (Y/C) color bar and 1kHz audio tone generator. The 810 outputs two composite video and one s-Video color...

Video Outputs    2 75% color bar on BNC connectors, 1Vpp/75Ω; 1 75% s-Video color bar on a 4-pin connector, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C)
Audio Outputs    1kHz, 4dBu/47Ω; balanced stereo audio on a detachable terminal block
Video S/N Ratio    75dB
Control    PAL/NTSC selector switch; audio level control (trimmer)
Line Jitter    2ns
841.jpg
Kramer: 841

Portable Computer Graphics Video Test Pattern Generator

The 841 is a high-performance portable computer graphics video test pattern generator. The 841 displays 31 preset patterns at 14 popular output resolutions...

Output    1 VGA, RGBHV on a 15-pin HD connector
Output Resolutions    SVGA (800x600), XGA (1024x768), SXGA (1280x1024), UXGA (1600x1200), WXGA (1280x800), WSXGA (1680x1050), WUXGA (1920x1200), WXGA (1440x900), SXGA (1400x1050), 1920x1080, 1280x720, 1152x864, 1280x960, 1920x1200 (reduced blanking); all resolutions are 60Hz progressive
Controls    Control buttons: PATTERN , PATTERN –, UXGA, SXGA, XGA, SVGA, SHIFT (ON), power (ON/OFF)
Indicators    ON – green, CHARGE – blue, lights when charging, 2-character display on the front panel
Power Source    5V DC, 1.4A (charge VGA), 1.0A (charge only)
900n.jpg
Kramer: 900n

Stereo Power Amplifier (8.4 Watts Per Channel)

The 900-N is a high-performance power amplifier for balanced or unbalanced stereo audio signals. With the 900 N, either input can deliver a speaker output of 8.4...

Inputs    1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector
Output    1 stereo loudspeaker output on a 4-pin terminal block connector
Output Power    8.4W RMS per channel into a 4Ω load
Output Music Power    35W RMS per channel into a 4Ω load
Bandwidth (-3dB)    24kHz
900xl.jpg
Kramer: 900xl

Stereo Audio Power Amplifier

The 900-xl is a high-performance power amplifier for line level stereo audio signals. The 900 xl accepts unbalanced audio signals on either of two RCA or 3.5mm...

Inputs    1 unbalanced stereo audio on a 3.5mm mini jack connector; 1 unbalanced stereo audio on RCA connectors
Output    1 stereo differential speaker output
Output Power    2x10W (4Ω)
Input Sensitivity    460mV
Output Music Power    2x40W (4Ω)
901.jpg
Kramer: 901

2x1 Personal Stereo Audio Power Amplifier & Switcher

The 901 is a high-performance integrated personal stereo amplifier for unbalanced stereo signals. The 901 accepts a stereo audio signal and delivers a speaker...

Inputs    1 unbalanced stereo audio, 1Vpp/50Ω on RCA connectors; 1 mono microphone, 5mV/3.2Ω (condenser) 4.8Ω (dynamic) with a type selector, on a 6.5mm phone jack
Outputs    Unbalanced stereo audio 2W/4Ω per channel on both 3.5mm mini jack and 4-pole detachable terminal block speaker output
Max. Output Level    8Vpp at Hi-Z load (headphones)
Bandwidth (-3dB)    37kHz
S/N Ratio    74dB
903.jpg
Kramer: 903

4x1 Personal Stereo Audio Amplifier & Switcher (10W/Channel)

The 903 is a high-performance integrated personal amplifier for unbalanced stereo audio signals. The 903 allows selection between four inputs and delivers a...

Inputs    1 unbalanced stereo audio 1Vpp/50Ω on a 3.5mm mini jack; 3 unbalanced stereo audio 1Vpp/50Ω on RCA connectors
Outputs    Stereo headphone on a 6.5mm connector; loudspeakers on a terminal block connector; automatic switching when a headphone is plugged in
Output Power    2x10W (4Ω)
Output Music Power    2x40W (4Ω)
Bandwidth (-3dB)    20kHz
906.jpg
Kramer: 906

2x1 Stereo Audio Amplifier & Switcher (6.8 Watts Per Channel)

The 906 is a high-performance controllable power amplifier for line-level stereo audio signals. The 906 accepts either an unbalanced stereo audio signal on RCA...

Inputs    1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector; 1 USB connector
Outputs    1 speaker stereo audio on a 4-pin terminal block connector
Output Power    2 x 5.3W per channel into 8Ω; 2 x 6.8W per channel into 4Ω
Output Music Power    2 x 22W per channel into 8Ω; 2 x 28W per channel into 4Ω
Bandwidth (-3dB)    32.5kHz
907.jpg
Kramer: 907

Stereo Audio Power Amplifier (40 Watts Per Channel)

The 907 is a high-performance power amplifier for line-level stereo audio signals. The 907 accepts a balanced stereo audio signal on a terminal block connector...

Input    1 balanced stereo audio on a terminal block connector
Output    1 balanced stereo audio (speakers) on a terminal block connector
Output Power    40 watts per channel into 8Ω
Output Music Power    150W per channel into 8Ω
Input Sensitivity    1.2Vrms
907xl.jpg
Kramer: 907xl

Stereo Power Amplifier

The 907xl is a high−performance power amplifier for line−level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and an...

908.jpg
Kramer: 908

Stereo Audio Amplifier & Switcher (40 Watts Per Channel)

The 908 is a high-performance audio amplifier for line-level stereo audio signals. The 908 accepts either a balanced or unbalanced stereo audio signal and...

Inputs    1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector; 1 USB connector
Output    1 speaker stereo audio on a 4-pin terminal block connector
Input Sensitivity    Unbalanced: 360mVpp; balanced: 220mVpp
Max. Voltage Gain    Unbalanced: 35dB; balanced: 40.5dB
Output Power    40W per channel into 8Ω
912.jpg
Kramer: 912

Stereo Audio Power Amplifier

The 912 is a high−performance power amplifier for balanced or unbalanced stereo audio signals. Either input can deliver a speaker output of 8.4 watts RMS power per channel...

f110.jpg
Kramer: f-110

VGA Line Transmitter

The F−110 is a wall plate insert transmitter for computer graphics video signals with resolutions up to and exceeding UXGA. It converts a computer graphics video signal into...

fc-10eth.jpg
Kramer: fc-10eth

RS-232/RS-485 To Ethernet Converter

The FC10ETH is a bi-directional RS-232 or RS-485 to Ethernet control signal converter. The FC-10ETH allows two RS-232 (or one RS-232 and one RS-485) controllable...

Ethernet Interface    10/100BaseT Ethernet
Serial Interfaces    2 RS-232 connectors, signals: RX, TX, RTS, CTS, ground on 9-pin D-sub (M) ports; 1 RS-485 on a detachable terminal block connector
Network Protocols    ICMP, ARP (ping), TCP, UDP
Power Source    12V DC, <80mA
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
fc-113.jpg
Kramer: fc-113

HDMI To 3G HD-SDI Format Converter

The FC113 is a high-performance format converter for HDMI signals. The FC113 converts an HDMI input signal to two identical SDI video signals with embedded...

Input    1 HDMI connector
Outputs    2 SD/HD-SDI, 3G HD-SDI on BNC connectors
Max. Data rate    Up to 3Gbps
Standard Compliance    HDMI
Input Formats    525i, 625i; 1080p @23.98/24/25/29.97/30/50/59.94/60; 1080i @50/59.94/60; 720p @50/59.94/60
fc29.jpg
Kramer: fc-29

IR Learner

The FC-29 learns and stores IR (infrared) commands on a PC via a USB connection. The stored IR commands can be uploaded later to multiple room

fc-31xl.jpg
Kramer: fc-31xl

Computer Graphics Video To DVI Format Converter

The FC31xl is a high-performance format converter for computer graphics signals with resolutions up to and including WUXGA. The FC 31xl converts a computer...

Input    1 UXGA on a 15-pin HD connector
Output    1 DVI , 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Supported Resolutions    640x480 @60Hz/72Hz/75Hz/85Hz; 720x400 @70Hz/85Hz; 800x600 @56Hz/60Hz/72Hz/75Hz/85Hz; 848x480 @60Hz; 1024x768 @60Hz/72Hz/75Hz/85Hz; 1152x864 @75Hz; 1280x768 @60Hz (RB)/75Hz/85Hz; 1280x800 @60Hz; 1280x960 @60Hz/85Hz; 1280x1024 @60Hz/75Hz/85Hz; 1360x768 @60Hz; 1400x1050 @60Hz(RB)/75Hz; 1440x900 @60Hz; 1440x1050 @60Hz; 1600x1200 @60Hz; 1680x1050 @60Hz; 1920x1080 @60Hz; 1920x1200 @60Hz(RB)
DVI Bandwidth    1.65GHz
Controls    DIP-switches
fc-32.jpg
Kramer: fc-32

DVI To Computer Graphics/Component/HDTV Video Format Converter

The FC32 is a high-performance format converter for DVI-D signals. The FC 32 converts (without scaling) a DVI-D input to a computer graphics or component video...

Input    1 DVI-D, 1.2Vpp on a Molex 24-pin (F) connector, DDC signal 5Vpp (TTL)
Outputs    1 VGA or YPbPr on a 15-pin HD (F) connector; YPbPr is with bi-level sync
Resolution    Up to WUXGA, 1080p
Control    Switch for RGB/YPbPr selection
Power Source    5V DC, 490mA
fc-321.jpg
Kramer: fc-321

2x1 3G HD-SDI To HDMI Format Converter

The FC321 is a high-performance format converter for 3G HD-SDI signals. The FC 321 converts one of two 3G HD-SDI signals to an HDMI output signal with the same...

Inputs    2 SDI, HD-SDI, 3G HD-SDI on a BNC connector
Output    1 HDMI connector
Max. Data Rate    Up to 3Gbps
Standard Compliance    HDMI
Indicator LEDs    SD/HD, OUT, ON
fc-322.jpg
Kramer: fc-322

2x1:2 3G HD-SDI To HDMI Format Converter

The FC322 is a high-performance format converter for 3G HD-SDI signals. The FC 322 converts one of two 3G HD-SDI signals to two HDMI output signals with the same...

Inputs    2 SDI, HD-SDI, 3G HD-SDI on BNC connectors
Outputs    2 HDMI connectors
Max. Data Rate    Up to 3Gbps
Standard Compliance    HDMI
Indicator LEDs    SD/HD, OUT, ON
fc-331.jpg
Kramer: fc-331

3G HD-SDI To HDMI Format Converter

The FC331 is a high-performance format converter for video signals up to 3G HD-SDI. The FC 331 converts the input video format (with embedded audio) to an HDMI...

Input    1 SDI, HD-SDI, 3G HD-SDI on a BNC connector
Outputs    1 SDI, HD-SDI, 3G HD-SDI loop on a BNC connector, 1 HDMI connector
Max. Data Rate    Up to 3Gbps
Standard Compliance    HDMI
Indicator LEDs    SD/HD, OUT, ON
fc-332.jpg
Kramer: fc-332

3G HD-SDI To HDMI Format Converter

The FC332 is a high-performance format converter for video signals up to 3G HD-SDI. The FC 332 converts the input video format (with embedded audio) to two HDMI...

Input    1 SDI, HD-SDI, 3G HD-SDI on a BNC connector
Outputs    1 SDI, HD-SDI, 3G HD-SDI loop on a BNC connector; 2 HDMI connectors
Max. Data Rate    Up to 3Gbps
Standard Compliance    HDMI
Indicator LEDs    SD/HD, OUT, ON
fc340.jpg
Kramer: fc-340

3G HD−SDI Scan Converter

The FC−340 is a broadcast−quality video scaler, audio embedder/de−embedder and scan converter for digital video signals up to 3G HD−SDI. The unit inputs an SDI...

fc-400.jpg
Kramer: fc-400

Time Base Corrector, Synchronizer & Format Converter

The FC400 is a TBC and synchronizer for composite and s-Video (Y/C) signals. The FC 400 corrects timing errors and outputs both composite and s-Video signals...

Inputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 SYNC (genlock): looped 75Ω/Hi-Z on BNC connectors
Outputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1 Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4- pin connector
Video Standards    NTSC (3.58) or PAL-B (DIP-switch selectable). No standards conversion
Digital Resolution    10 bits
Bandwidth (-0.5dB)    5MHz
fc4002.jpg
Kramer: fc-4002

Analog Video Transcoder

The FC−4002 is a high−performance broadcast quality, universal video transcoder for analog video signals. It converts a composite video, s−Video (Y/C) or component...

fc-46xl.jpg
Kramer: fc-46xl

HDMI Audio De-embedder

The Kramer FC-46XL is a HDMI audio de-embedder


Input    1 HDMI connector
Outputs    1 HDMI connector, 1 TOSLINK® optical digital audio connector, 1 S/PDIF digital audio on an RCA connector, 1 unbalanced stereo audio on a 3.5mm mini connector
Operation Frequency    Supports up to 2.25Gbps (1080p @60Hz) 36-bit Deep Color
Compliance with Standards    Supports HDMI, HDCP 1.4
Controls    Audio source select button
fc-49.jpg
Kramer: fc-49

DVI & Audio To HDMI Format Converter & Audio Embedder

Input    1 DVI-D, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp; 1 S/PDIF (digital audio) on an RCA connector; 1 unbalanced stereo audio on a 3.5mm mini jack; 1 TOSLINK® optical connector
Output    HDMI connector
Compliance with HDMI Standard    Supports DVI 1.0, HDMI, and HDCP
Operation Frequency    Supports up to 1.65Gbps (UXGA, 1080p)
Controls    EDID button
fc-7402.jpg
Kramer: fc-7402

SDI To Multi-Format Analog Video Format Converter & Processor

The FC7402 is a format converter for SDI (SMPTE 259M) signals. The FC 7402 converts an SDI video signal to composite video, s-Video (Y/C), and RGB/component (RGsB...

Input    1 SDI: SMPTE 259M, ITU-R BT.601 (CCIR-601), 75Ω on a BNC connector
Outputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (luma), 0.3Vpp/75Ω (chroma) on a 4-pin connector; 1 component: RGB/Y, R-Y, B-Y (1V, 0.7V, 0.7V/75Ω) on BNC connectors; 1 SDI (reclocked): SMPTE 259M, ITU-R BT.601 (CCIR-601) 75Ω on a BNC connector
Resolution    10-bit
Bandwidth (-3dB)    5.7MHz
Non-Linearity    /-1.0%
fc-7501.jpg
Kramer: fc-7501

Multi-Standard Composite Video, S-Video & Component Video To SDI Format Converter

The FC-7501 is a format converter for composite video, s-Video or component video (YUV) signals. The FC7 501 converts either PAL, SECAM, and NTSC composite video,...

Input    1 composite video: 1Vpp/75Ω (Y) looping on BNC connectors with a termination switch; 1 (B-Y): 0.7Vpp/75Ω looping on BNC connectors with a termination switch; 1 (R-Y)/C 0.7Vpp/0.3Vpp/75Ω looping on BNC connectors with a termination switch
Outputs    2 SDI on BNC connectors
Video Standards    CV, Y/C: NTSC (M, Japan, 4.43), PAL (B, D, G, H, I, M, N, Nc) and SECAM (B, D, G, K, K1, L)
Bandwidth (-3dB)    6MHz
Resolution    10 bits
kds-en1.jpg
Kramer: kds-en1

H.264 HD IP Encoder

The KDS−EN1 is an H.264−based encoder for digital signals up to 3G HD−SDI, composite and component video, HDMI and balanced audio. All signals are encoded and...

kds-en2r.jpg
Kramer: kds-en2r

HDMI over IP Receiver

The KDS−EN2R is an IP−based receiver for HDMI signals. Using JPEG2000 compression technology, the KDS−EN2R receives a visually lossless HD image...

kw11.jpg
Kramer: kw-11

Wireless HDMI Trans/Receiver

The KW−11T and KW−11R is a high−definition, wireless, HDMI transmitter and receiver combination for indoor use over short range distances. The...

mv6.jpg
Kramer: mv-6

3G HD-SDI 6-Input Multi-Viewer

The MV−6 is a versatile, high−performance multiviewer for 3G HD−SDI video signals. The device can display up to six inputs in any combination and output the image...

pip-4.jpg
Kramer: pip-4

4 Composite Video Picture-in-Picture Inserter

The PIP4 is a high-performance picture-in-picture inserter for composite video signals. The PIP 4 output can display up to four images simultaneously, each of...

Inputs    4 composite video 1Vpp @75Ω on BNC connectors
Outputs    1 s-Video 1Vpp, 0.3Vpp/75Ω on a 4-pin s-Video connector; 1 composite video 1Vpp/75Ω on a BNC connector
Digital Resolution    10 bit
Video Bandwidth    5.4MHz
K-Factor    0.9%
pl50.jpg
Kramer: pl-50

5-Channel AC Power Controller

The PL−50 is a power controller that monitors and controls up to five power channels by detecting the power status of the connected units. Using an embedded Web server, the...

ps1dvi.jpg
Kramer: ps-1dvi

Power Supply-FODM/FODM Cable

The PS−1DVI is a high−performance power supply for DVI cables. It provides 5V DC on pin 14 of the DVI plug for applications where power is not provided by the DVI...

pt100.jpg
Kramer: pt-100

VGA Twisted Pair Equalizer

The PT−100 is a high−performance line equalizer for computer graphics video over twisted pair signals. The unit provides level and equalization controls for signals that...

pt-101h4.jpg
Kramer: pt-101h4

HDMI Repeater And Format Converter

The PT101H4 is a high-performance repeater and format converter for HDMI signals. The PT 101H4 combines previous HDMI formats and Ethernet to provide HDMI (v1.4...

Input    1 HDMI connector, 1 Ethernet on an RJ-45 TP connector
Outputs    1 HDMI connector, 1 S/PDIF on an RCA connector
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Input: HDMI; output: HDMI and HDCP
Power Source    5V DC, 450mA
pt-101hdcp.jpg
Kramer: pt-101hdcp

DVI Repeater

The PT101HDCP is a line driver/repeater for DVI-D video signals. The PT 101HDCP reclocks and equalizes the signal enabling multiple units to be cascaded.
...

Input    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Output    1 DVI, 1.2Vpp on DVI Molex 24-pin female connectors; DDC signal 5Vpp (TTL)
Bandwidth    Supports up to 2.25Gbps bandwidth
Power Source    5V DC, 180mA
Dimensions    6.22cm x 5.23cm x 3.20cm (2.5" x 2.1" x 1.3") W, D, H
pt-101hxl.jpg
Kramer: pt-101hxl

HDMI Repeater

The PT101Hxl is a line driver/repeater for HDMI video signals. The PT 101Hxl reclocks and equalizes the signal enabling multiple units to be cascaded.
...

Input    1 HDMI connector
Output    1 HDMI connector
Bandwidth    Supports up to 2.25Gbps bandwidth
Compliance With Standards    HDMI, HDCP
Power Source    5V DC, 120mA
pt-102an.jpg
Kramer: pt-102an

1:2 Stereo Audio Distribution Amplifier

The 105-A is a high-performance distribution amplifier for unbalanced stereo audio signals. The 105 A takes one stereo input and distributes the signal to five...

Input    1 unbalanced stereo audio on a 3.5mm mini jack
Outputs    2 unbalanced stereo audio on 3.5mm mini jacks
Max. Output Level    5Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    85dB @1kHz
pt-102sn.jpg
Kramer: pt-102sn

1:2 S-Video Distribution Amplifier

The PT102SN is a high-performance video distribution amplifier for s-Video (Y/C) video signals. The PT 102SN takes one input, provides correct buffering and...

Input    1 s-Video on a 4-pin connector
Outputs    2 s-Video on 4-pin connectors
Max. Output level    1.3Vpp
Bandwidth (-3dB)    150MHz
Diff. Gain    0.05%
pt-102vn.jpg
Kramer: pt-102vn

1:2 Composite Video Distribution Amplifier

The PT102VN is a distribution amplifier for composite video or SDI signals. The PT 102VN takes one input, provides correct buffering and isolation and distributes...

Inputs    1 Video, 1Vpp/75Ω on A BNC Connector
Outputs    2 Video, 1Vpp/75Ω on BNC
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    430MHz
Diff. Gain    0.05%
pt-103v.jpg
Kramer: pt-103v

1:3 Composite Video Distribution Amplifier

The PT103V is a composite video distribution amplifier. The PT 103V takes one input, provides correct buffering and isolation and distributes the signal to three...

Input    1 Video, 1Vpp/75Ω on an RCA Connector
Outputs    3 Video, 1Vpp/75Ω on RCA Connectors
Max. Output Level    1.9Vpp
Bandwidth (-3dB)    407MHz
Diff. Gain    0.04%
pt-110-od.jpg
Kramer: pt-110-od

Computer Graphics Video Over Twisted Pair Transmitter With EDID & EMP Protection

The PT110-od is a twisted pair transmitter for computer graphics video signals. The PT 110-od converts a computer graphics signal into a twisted pair signal that...

Input    1 VGA/UXGA on a 15-pin HD connector
Output    1 RJ-45 LINE OUTPUT connector
Resolution    WUXGA & 1080p
S/N Ratio    69dB (worst case)
Coupling    AC
pt-110edid.jpg
Kramer: pt-110edid

Computer Graphics Video Over Twisted Pair Transmitter With EDID

The PT110EDID is a twisted pair transmitter for computer graphics video signals. PT 110EDID converts a computer graphics signal into a twisted pair signal that is...

Input    1 VGA/UXGA on a 15-pin HD connector
Output    1 RJ-45 LINE OUTPUT connector
Resolution    WUXGA & 1080p
S/N Ratio    69dB (worst case)
Coupling    AC
pt-120.jpg
Kramer: pt-120

Computer Graphics Video Over Twisted Pair Receiver

The PT120 is a twisted pair receiver for computer graphics video signals. The PT 120 converts a twisted pair signal from a PT-110 transmitter (or other compatible...

Input    1 RJ-45 connector
Output    1 VGA/UXGA on a 15-pin HD connector
Max. Output level    1.5Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    2.9% (worst case)
pt-1spdif.jpg
Kramer: pt-1spdif

S/PDIF To TOSLINK® Digital Audio Format Converter

The PT-1SPDIF is a format converter for S/PDIF digital audio signals. It converts an S/PDIF signal to a TOSLINK ® optical

Input    1 S/PDIF (digital audio) on an RCA connector
Output    1 Optical (digital audio) on a TOSLINK® connector
Sampling    32kHz to 192kHz
Power Source    12V DC, 50mA
Dimensions    4.27cm x 2.2cm x 5.64cm (1.68" x 0.87" 2.22") W, D, H
pt-201vga.jpg
Kramer: pt-201vga

2x1 Computer Graphics Video Mechanical Switcher

The PT201VGA is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA. The PT 201VGA switches either of two...

Inputs    2 analog red, green, blue signals: 0.7Vpp/75Ω, H & V sync, TTL level, on 15-pin HD (F) connectors
Output    1 analog red, green, blue signals: 0.7Vpp/75Ω, H & V syncs, TTL level, on a 15-pin HD (F) connector
Bandwidth (-3dB)    1200MHz
Dimensions    6cm x 6.5cm x 2.5cm (2.36" x 2.56" x 1") W, D, H
Weight    0.14kg (0.31lbs) approx
pt-4irex.jpg
Kramer: pt-4irex

Infrared Repeater With External IR Sensor Input

The PT4iREX is an infrared signal repeater that can operate at distances of up to approximately 75m (240ft). The PT 4iREX extends infrared signals in areas where...

Input    1 IR receiver
Outputs    4 IR emitters on 3.5mm mini connectors
Power Source    12V DC, 95mA
Dimensions    6.22cm x 5.24cm x 2.41cm (2.45" x 2.06" x 0.95") W, D, H
Weight    0.15kg (0.55lbs) approx
pt-571.jpg
Kramer: pt-571

HDMI Over Twisted Pair Transmitter

The PT571 is a twisted pair transmitter for HDMI signals. The PT 571 converts an HDMI signal to a single twisted pair signal and the PT-572 converts the twisted...

Inputs    1 HDMI connector
Outputs    1 RJ-45 connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3 and HDCP
Power Source    12V DC, 250mA (transmitter and receiver together)
pt-571hdcp.jpg
Kramer: pt-571hdcp

DVI Over Twisted Pair Transmitter

The PT571HDCP is a twisted-pair transmitter for DVI signals. The PT 571HDCP converts the DVI to twisted pair signal and the PT-572HDCP converts the twisted pair...

Inputs    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector
Outputs    1 CAT 5 OUT on an RJ-45 connector
Bandwidth    Up to 1.65Gbps; WUXGA, 1920x1080p
Power Source    12V DC, 250mA (transmitter and receiver together)
Dimensions    6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H
pt572pl.jpg
Kramer: pt-572-plus

HDMI Twisted Pair Receiver

The PT−572+ is a DGKat™ twisted pair receiver for HDMI signals. The PT−571 converts an HDMI signal to a single twisted pair signal and the...

pt-572hdcp-plus.jpg
Kramer: pt-572hdcp-plus

DVI Over Twisted Pair Receiver

The PT572HDCP is a DGKat ™ twisted-pair receiver for DVI signals. The PT-571HDCP converts the DVI to twisted pair signal and the PT 572HDCP converts the...

Inputs    1 DGKat twisted pair on an RJ-45 connector
Outputs    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector, DDC signal 5Vpp (TTL)
Bandwidth    Supports up to 1.65Gbps
Power Source    12V DC, 250mA
Dimensions    6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H
pt-2spdif.jpg
Kramer: pt-s2pdif

Toslink to S/PDIF Converter

The PT-2SPDIF is a format converter for S/PDIF digital audio signals. It converts an S/PDIF signal to a TOSLINK ® optical

rc108.jpg
Kramer: rc-108

8-Button Controller

The RC-108 is a presentation controller for twisted pair transmitters. The unit can switch up to 8 sources that are interconnected in series through looping inputs to a single...

rc116.jpg
Kramer: rc-116

8-Button Controller

The RC-116 is a presentation controller for twisted pair transmitters. The unit can switch up to 16 sources that are interconnected in series through looping inputs to a single...

rc-2.jpg
Kramer: rc-2

Wall Plate - RS-232 Controller

The RC2 is a 2-button controller that sends a series of RS-232 commands with the push of a button. The RC 2 operates serial devices such as projectors, displays &...

Ports    1 RS-232 on a terminal block connector
Power Source    12V DC, 40mA
Dimensions    7.9cm x 1.59cm x 12.4cm (3.12" x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm (3.39" x 0.63" x 3.39") and 8cm x 1.59cm x 8cm (3.15" x 0.63" x 3.15") EU W, D, H
Weight    0.3kg (0.67lbs) approx
Accessories    Power supply
rc-2c.jpg
Kramer: rc-2c

Wall Plate - RS-232 & IR Controller

The RC2C is a 2-button controller that sends a series of RS-232 or IR commands with the push of a button. The RC 2C operates serial or IR-controlled devices such...

Ports    1 RS-232 on a terminal block connector; IR OUT on a terminal block connector
Power Source    12V DC, 40mA
Dimensions    7.9cm x 1.59cm x 12.4cm (3.12" x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm (3.39" x 0.63" x 3.39") and 8cm x 1.59cm x 8cm (3.15" x 0.63" x 3.15") EU W, D, H
Weight    0.3kg (0.67lbs) approx
Accessories    Power supply
rc-3tb.jpg
Kramer: rc-3tbu

3-Button Remote Control Panel

The RC−3TBU remotely replicates the buttons of the SL−14RC/SL−14RCN master room

rc-53d.jpg
Kramer: rc-53d

K-NET ™ Auxiliary Control Panel

The RC−53D is a 6−button auxiliary control panel. It works with master room controllers such as the SL Series Master Room Controllers via the K−NET™...

Ports    2 K-NET™ on terminal block connectors; 1 RS-232 on terminal block connectors, 1 USB connector
Power Source    12V DC, 140mA over K-NET™
Fuse    500mA, FSMD 1812
Adapter    SummitView™ kits: 12V, 5A
Dimensions    11.4cm x 2.6cm x 11.4cm (4.49" x 1.02" x 4.49")US; 15.2cm x 1.9cm x 8.6cm (5.98" x 0.75" x 3.39") and 15.2cm x 1.9cm x 8cm (5.98" x 0.75" x 3.15") EU W, D, H
rc53dlc.jpg
Kramer: rc-53dlc

6-Button K-NET Auxiliary Control Panel

The RC−53DLC is a 6−button auxiliary control panel. It works with master room controllers, such as the Kramer SummitView™ BrainBox or the SL Series Master Room...

rc54dl.jpg
Kramer: rc-54dl

Auxiliary Control Panel

The RC−54DL is a 12−button auxiliary control panel that works as a remote control panel for master room controllers such as the RC−74DL in classrooms, boardrooms or...

rc5b2.jpg
Kramer: rc-5b2

2−Button Aux Control Panel

The RC−5B2 is an 2−button auxiliary control panel with backlit RGB buttons. It can be used as an auxiliary controller when connected via K−NET™ to a master...

rc5b4.jpg
Kramer: rc-5b4

4−Button Aux Control Panel

The RC−5B4 is a 4−button auxiliary control panel with backlit RGB buttons. It can be used as an auxiliary controller when connected via K−NET™ to a master room...

rc-62.jpg
Kramer: rc-62

6-Button Room Controller With Printed Group Labels

The RC62 is a 6-button room controller for multimedia rooms. The RC 62 can function either as a stand alone controller or as part of the SummitView ™ system to...

Ports    1 RS-232 on terminal block connectors; 2 K-NET on terminal block connectors; 1 USB port
Outputs    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 1 IR emitter on terminal block connectors
Power Source    12V DC, 100mA
Adapter    SummitView™ kits: 12V, 5A; independent: 12V/500mA
Dimensions    6.9cm x 2.9cm x 11.4cm (2.71" x 1.14" x 4.49") US; 15.2cm x 2.3cm x 8.6cm (5.98" x 0.9" x 3.39") and 15.2cm x 2.3cm x 8cm (5.98" x 0.9" x 3.15") EU W, D, H
rc-63a.jpg
Kramer: rc-63a

6-Button Room Controller With Analog Volume Knob & Printed Group Labels

The RC63A is a 6-button room controller with an analog volume knob for multimedia rooms. The RC 63A functions either as a standalone controller or as part of the...

Ports    1 RS-232 on terminal block connectors; 2 K-NET on terminal block connectors; 1 USB port
Output    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 1 IR emitter on terminal block connectors
Power Source    12V DC, 100mA
Fuse    500mA, FSMD 2920
Adapter    SummitView™ kits: 12V, 5A; independent: 12V, 500mA
rc-63al.jpg
Kramer: rc-63al

6-Button Room Controller With Analog Volume Knob & LCD Group Labels

The RC63AL is a 6-button room controller with an analog volume knob for multimedia rooms. The RC 63AL functions either as a standalone controller or as part of...

Ports    1 RS-232 on terminal block connectors; 2 K-NET on terminal block connectors; 1 USB port
Output    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 1
Source   
Fuse    500mA, FSMD 2920
Adapter    SummitView™ kits: 12V, 5A; independent: 12V, 500mA
rc-63d.jpg
Kramer: rc-63d

6-Button Room Controller With Digital Volume Knob & Printed Group Labels

The RC63D is a 6-button room controller with a digital volume knob for multimedia rooms. The RC 63D can function either as a standalone controller or as part of...

6 Programmable Buttons    Color, back-lit & label capable
Printed Group Labels    For programmable back-lit LCD group labels, order the RC-62DL
Volume    Digital Volume Control Knob
Programming    6 Programmable-Color, Back Lit & Label Capable Buttons. User-friendly appearance
Macro Capability    Carry out multiple commands with a single press of a button
rc-63dl.jpg
Kramer: rc-63dl

6-Button Room Controller With Digital Volume Knob & LCD Group Labels

The RC63DL is a 6-button room controller with a digital volume knob for multimedia rooms. The RC 63DL is part of the SummitView ™ system to control audio...

Ports    1 RS-232 on terminal block connectors; 2 K-NET on terminal block connectors; 1 USB port
Output    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 1 IR emitter on terminal block connectors
Power Source    12V DC, 140mA
Fuse    500mA, FSMD 2920
Adapter    SummitView™ kits: 12V, 5A; independent: 12V, 500mA
rc-6ir.jpg
Kramer: rc-6ir

6-Button Universal Room Controller With IR Learning

The RC6iR is a 6-button room controller for multimedia rooms. The RC 6iR controls audio components, video components, and other room facilities such as lights and...

Ports    2 RS-232 on terminal block connectors; 1 RS-485 on terminal block connectors; 1 Ethernet RJ-45 port
Outputs    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 2 IR emitters on terminal block connectors
Power Source    12V DC, 155mA
Dimensions    6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") and 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H
Weight    0.3kg (0.67lbs) approx
rc-74dl.jpg
Kramer: rc-74dl

12-Button Room Controller

The RC−74DL is a 12−button master room controller with a digital volume knob for multimedia rooms. The unit can function either as a standalone controller or as part of...

rc76.jpg
Kramer: rc-76r

6−Button Room Controller

The RC−76R is a six−button configurable room controller for multimedia rooms. It controls audio components, video components and other room facilities such as lights and...

rc-78r.jpg
Kramer: rc-78r

8 Button Room Controller

The RC−78R is an eight−button configurable room controller for multimedia rooms. It controls audio components, video components and other room facilities such as lights...

rc-8ir.jpg
Kramer: rc-8ir

8-Button Universal Room Controller With IR Learning

The RC8iR is an 8-button room controller for multimedia rooms. The RC 8iR controls audio components, video components and other room facilities such as lights and...

Ports    2 RS-232 on terminal block connectors, 1 RS-485 on terminal block connectors, 1 Ethernet RJ-45 port, 2 IR
Outputs    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 2 IR emitters on terminal block connectors (for RC-6IR and RC-8IR)
Power Source    12V DC, 155mA
Dimensions    6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") and 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H
Weight    0.3kg (0.67lbs) approx
rc-116.jpg
Kramer: rc-ir3

IR Remote Control

The RC−IR3 is an infrared wireless remote control unit for all Kramer IR controllable switchers. The remote can switch up to 96x96 inputs and

sg-6005xl.jpg
Kramer: sg-6005xl

Multi-Standard Composite Video Black Burst, Color Bar & Audio Tone Generator

The SG6005xl is a broadcast quality black burst, color bar, sync, and audio tone generator for composite video and audio applications. The SG 6005xl outputs ten...

Inputs    1 REF (genlock), looping, 1Vpp/75Ω, on BNC connectors with a termination switch
Outputs    10 composite video on BNC connectors, globally configurable: black burst 0.3Vpp/75Ω (sync) or 1Vpp/75Ω max (color bar); 1 balanced stereo audio on 2 XLR connectors, 12dBu max; 1 unbalanced stereo audio on 2 RCA connectors, 6dBu max; 2 AES/EBU digital audio on XLR connectors, 0dBFS max; 2 AES-3id (75Ω) digital audio on BNC connectors, 0dBFS max
Video Standards    PAL, NTSC
Color Bar    8 selectable patterns
Stability    1ppm
si-1vga.jpg
Kramer: si-1vga

Remote Control Step-In Module Insert

The SI1VGA is a step-in remote control insert module for VGA and unbalanced stereo audio signals. The SI 1VGA module fits into a Kramer TBUS-10 Table Connection...

Inputs    1 VGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack
Outputs    1 VGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack
Control    Front panel push button
Dimensions    8.9cm x 3.1cm x 2.4cm (3.5" x 1.2" x 0.94") W, D, H
Weight    0.2kg (0.44lbs) approx
sid-dp.jpg
Kramer: sid-dp

DP DGKat TP Step-In Module

The SID−DP is a DGKat™ twisted pair transmitter and step−in commander for DisplayPort and unbalanced stereo audio signals. The unit includes a...

sid-dvi.jpg
Kramer: sid-dvi

DVI DGKat TP Step-In Module

The SID−DVI is a DGKat™ twisted pair transmitter and step−in commander for DVI and unbalanced stereo audio signals. The unit includes a “Step−In”...

sid-h.jpg
Kramer: sid-h

HDMI DGKat TP Step-In Module

The SID−H is a DGKat™ twisted pair transmitter and step−in commander for HDMI and unbalanced stereo audio signals. The unit includes a “Step−In”...

sid-vga.jpg
Kramer: sid-vga

XGA over TPair Step-In Module

The SID−VGA is a DGKat™ twisted pair transmitter and step−in commander for computer graphics video and unbalanced stereo audio signals. The unit includes a...

sid-x1.jpg
Kramer: sid-x1

4-Input TP Step-In Module

The SID−X1 is a DGKat™ twisted pair transmitter and step−in commander for computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals. The...

sl-1.jpg
Kramer: sl-1

Master Room Controller

The SL1 is a master room controller. The SL 1 controls audio components, video components and other room facilities such as lights and screens.

Ports    2 RS-232 and 1 K-NET™ on terminal block connectors; Ethernet on an RJ-45 connector; 1 infrared sensor, 1 infrared on a 3.5mm mini jack connector; 1 USB for programming
Outputs    2 infrared and 3 relays (36V AC or DC, 2A, 60V AC maximum on non-inductive load) on terminal block connectors
Default IP Settings    IP number = 192.168.1.39; Mask = 255.255.0.0; Gateway = 0.0.0.0
Indicators    LED indicator for each function
Power Source    12V DC, 2A (from power supply) or 12V DC over K-NET™ connection
sl10.jpg
Kramer: sl-10

Master Room Controller

The SL−10 is a master room controller. It controls audio components, video components and other room facilities such as lights and

sl-12.jpg
Kramer: sl-12

Master Room Controller

The SL−12 is a highly versatile control processor for AV equipment —especially projectors and associated equipment in any room (such as classrooms, boardrooms, or...

Ports    4 RS-232, RS-485, 4 GPI/O and K-NET™ on terminal block connectors; Ethernet on an RJ-45 connector; 1 infrared sensor, 2 infrared on 3.5mm mini jacks; 1 USB for programming
Outputs    4 infrared, 8 relays (36V AC or DC, 2A, 60V AC maximum on non-inductive load)
Default IP Settings    IP number = 192.168.1.39; Mask = 255.255.0.0; Gateway = 0.0.0.0
Indicators    LED indicator for each function
Power Source    12V DC, 2A (from power supply) or 12V DC over K-NET™ connection
sl14rcn.jpg
Kramer: sl-14rcn

Master Room Controller

The SL−14RCN is a highly versatile master room controller that acts as an all−in−one extended remote control panel for AV equipment. Optional 3−button remote...

sp-12hd.jpg
Kramer: sp-12hd

Multi-Format Analog & HD-SDI Video Processor/ProcAmp/TBC/Format Converter

The SP12HD is a broadcast-quality video processor that functions as a ProcAmp, TBC and format converter for composite video, s-Video (Y/C), component video (YUV) and HD-SDI video...

Inputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 component: Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp)/75Ω on BNC connectors; 1 SDI: SMPTE-259M, SMPTE-292M, SMPTE-344M, ITU-R BT.601 on a BNC connector
Outputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω(Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 component: Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp)/75Ω on BNC connectors; 2 SDI: SMPTE-259M, SMPTE-292M, SMPTE-344M, ITU-R BT.601 on BNC connectors
Bandwidth    0.5dB to 5MHz (SDTV), to 10MHz (EDTV), to 30MHz (HDTV), fully loaded
S/N Ratio    60dB
Standards    CVBS (SDTV): PAL-B/D/G/H/I/M/N, NTSC-3.58/4.43, SECAM; EDTV: 480p/60, 576p/50; HDTV: 720p/50, 720p/59.94, 720p/60, 1080i/50, 1080i/59.94, 1080i/60, 1080p/23.98, 1080p/24, 1080p/25, 1080p/29.97, 1080p/30, 1080psf/23.98, 1080psf/24, 1080psf/25, 1080psf/29.97 and 1080psf/30
sp4d.jpg
Kramer: sp-4d

4−Channel HD−SDI Synchronizer

The SP−4D is a synchronizer for serial digital signals up to HD−SDI. The unit synchronizes up to four channels from the dedicated genlock input or any other specified...

tp-10.jpg
Kramer: tp-10

Composite Video, S-Video & Stereo Audio Over Twisted Pair Receiver With IR Repeater

The TP10 is a twisted pair receiver for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video...

Input    1 RJ-45 CAT 5 shielded connector (LINE IN)
Output    1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video 1Vpp/75Ω [Y], 0.3Vpp/75Ω [C] on a 4-pin connector; 1 S/PDIF (digital audio) on an RCA connector; 1 audio (analog audio) <8dBu on a 3.5mm mini connector
Max. Output Level    Video: 2.6V; Audio: 4.6Vpp
Bandwidth    Video: >70MHz/-3dB; Audio: 20Hz to 20kHz/0.1dB
Non-Linearity    <0.05%
tp-100axr.jpg
Kramer: tp-100axr

Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter

The TP-100AXR is a twisted pair transmitter for computer graphics video and unbalanced stereo signals. The TP 100AXR converts the input signals into a twisted...

Inputs    1 VGA on a 15-pin HD connector, 1 analog audio on a 3.5mm mini jack
Outputs    2 RJ-45 OUT connectors, 1 VGA loop on a 15-pin HD connector, 1 analog audio loop out on a 3.5mm mini jack
Resolution    Up WUXGA & 1080p
Bandwidth (-3dB)     20kHz
S/N Ratio    Video: 60dB; Audio: <89dB
tp-102hd.jpg
Kramer: tp-102hd

Computer Graphics Video & HDTV Over Twisted Pair Transmitter

The TP-102HD is a twisted pair transmitter for computer graphics video and HDTV signals. The TP 102HD converts a computer graphics video or HDTV signal on a...

Input    1 XGA/HD on a 15-pin HD (F) connector
Outputs    2 RJ-45 connectors
Max. Output Level    1.7Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.75%
tp-104hd.jpg
Kramer: tp-104hd

1:4 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-104HD is a twisted pair transmitter for computer graphics signals. The TP 104HD converts a computer graphics video signal into four twisted pair...

Input    1 VGA/UXGA on a 15-pin HD connector
Outputs    4 RJ-45 OUT connectors
Max. Output Level    1.4Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    3.2%
tp-105hd.jpg
Kramer: tp-105hd

1:2 Twisted Pair Line Driver & Distribution Amplifier

The TP-105HD is a line driver and distribution amplifier for analog video over twisted pair signals. The TP 105HD takes a twisted pair input and distributes it to...

Input    1 RJ-45 connector
Outputs    2 RJ-45 connectors
Max Output Level    1.6Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain (PAIR)    1.2%
tp-112hd.jpg
Kramer: tp-112hd

1:2 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-112HD is a twisted pair transmitter for computer graphics video and HDTV signals. The TP 112HD converts a computer graphics video or HDTV signal on a...

Input    1 XGA/HD on a 15-pin HD (F) connector
Outputs    2 twisted pair on RJ-45 connectors
Max. Output Level    1.7Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    4%
tp-114.jpg
Kramer: tp-114

1:4 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-114 is a high-performance distribution amplifier for computer graphics video or HDTV signals. The TP 114 converts a computer graphics video or HDTV signal...

Input    1 XGA on a 15-pin HD (F) connector
Outputs    1 XGA on a 15-pin HD (F) connector; 4 twisted pair on RJ-45 OUT connectors
Max. Output Level    1.8Vpp (XGA), 1.6Vpp (CAT 5)
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.03% (XGA), 7% (CAT 5)
tp-120.jpg
Kramer: tp-120

Computer Graphics Video Over Twisted Pair Receiver

The TP-120 is a twisted pair receiver for computer graphics video signals. When used in conjunction with the PT-110 twisted pair transmitter (or other compatible Kramer...

Input    1 RJ-45 line in
Output    1 VGA/UXGA on a 15-pin HD connector
Max. Output Level    1.4Vpp
Max. Resolution    WUXGA & 1080p
S/N Ratio    80dB
tp-120-od.jpg
Kramer: tp-120-od

Computer Graphics Video Over Twisted Pair Receiver With EMP Protection

The TP-120-OD is a twisted pair receiver for computer graphics video signals. When used in conjunction with the PT-110 twisted pair transmitter (or other compatible Kramer...

Input    1 RJ-45 line in
Output    1 VGA/UXGA on a 15-pin HD connector
Max. Output Level    1.4Vpp
Max. Resolution    WUXGA & 1080p
S/N Ratio    80dB
tp-121-od.jpg
Kramer: tp-121-od

Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter With EDID & EMP Protection

The TP-121-od is a twisted pair transmitter for computer graphics video, stereo and S/PDIF audio signals. The TP 121-od transmitter converts computer graphics...

Input    Video: 1 VGA/UXGA on a 15-pin HD connector; Audio: 1 audio analog 3.5mm mini jack
Output    1 RJ-45 OUT connector
Max. Output Level    Video: 1V; Audio: 2.5V
Max. Resolution    WUXGA & 1080p
Bandwidth(-3dB)    Audio: 20Hz to 20kHz @0.5dB
tp-121edid.jpg
Kramer: tp-121edid

Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter With EDID

The TP-121EDID is a high-performance twisted pair transmitter for computer graphics video and unbalanced stereo audio signals. The TP 121EDID converts the input...

Inputs    1 VGA/WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
Output    1 CAT 5 RJ-45 OUT connector
Audio Bandwidth (-3dB)    20Hz to 20kHz @0.5dB
Resolution    Up to WUXGA and 1080p
S/N Ratio    Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: <-80dB
tp121xl.jpg
Kramer: tp-121xl

VGA/A Twisted Pair Transmitter

The TP−121xl is a high−performance twisted pair transmitter for computer graphics video and unbalanced stereo audio signals. It converts the input signals to a twisted...

tp-122.jpg
Kramer: tp-122

Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver
The TP-121 and TP122 are a twisted pair transmitter and receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121 transmitter converts computer graphics video...
Input    1 RJ-45 line in connector
Output    Video: 1 VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V; Audio: 2.5V
Max. Resolution    WUXGA & 1080p
S/N Ratio    Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: < –80dB
tp-122-od.jpg
Kramer: tp-122-od

Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver With EMP Protection

The TP-122-od is a twisted pair receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121-od transmitter converts computer graphics video and unbalanced...

Input    1 RJ-45 line in connector
Output    Video: 1 VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V; Audio: 2.5V
Max. Resolution    WUXGA & 1080p
S/N Ratio    Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: < –80dB
tp-122xl.jpg
Kramer: tp-122n

XGA & Audio TPair Receiver

The TP−122N is a twisted pair receiver for computer graphics video, unbalanced stereo and S/PDIF audio signals. The unit receives a twisted pair signal from the...

tp122xl.jpg
Kramer: tp-122xl

VGA/A Twisted Pair Receiver

The TP−122xl is a high−performance twisted pair receiver for computer graphics video and unbalanced stereo audio signals. It converts the twisted pair input signal to...

tp-123-od.jpg
Kramer: tp-123-od

Computer Graphics Video, Stereo Audio & RS-232 Over Twisted Pair Transmitter With EDID & EMP Protection

The TP-123-od is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo analog audio and unidirectional RS-232 control command signals. The...

Inputs    1 VGA/WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
Output    1 RJ-45 OUT connector
Control    RS-232 2-pin terminal block
RS-232 Baud Rate    Up to 19200kbps
Bandwidth (-3dB)    Audio: 20Hz to 20kHz @0.5dB
tp-123edid.jpg
Kramer: tp-123edid

Computer Graphics Video, Stereo Audio & RS-232 Over Twisted Pair Transmitter With EDID

The TP-123EDID is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo analog audio and unidirectional RS-232 control command signals. The...

Inputs    1 VGA/WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
Output    1 RJ-45 OUT connector
Control    RS-232 2-pin terminal block
RS-232 Baud Rate    Up to 19200kbps
Bandwidth (-3dB)    Audio: 20Hz to 20kHz @0.5dB
tp-124.jpg
Kramer: tp-124

Computer Graphics Video, Stereo & S/PDIF Audio & Data Over Twisted Pair Receiver

The TP-124 is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123 converts computer graphics, audio, and RS-232 inputs...

Input    1 RJ-45 OUT connector
Outputs    Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V; Audio: 2.5V
Communication    RS-232 on 2-pin terminal block; maximum bitrate 19200bps
Controls    Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz
tp-124-od.jpg
Kramer: tp-124-od

Computer Graphics Video, Stereo & S/PDIF Audio & RS-232 Over Twisted Pair Receiver With EMP Protection

The TP-124-od is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123-od converts computer graphics, audio, and RS-232...

Input    1 RJ-45 OUT connector
Outputs    Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio Analog 3.5mm mini jack
Max. Output Level    Video: 1V; Audio: 2.5V
Communication    RS-232 on 2-pin terminal block; maximum bitrate 19200bps
Controls    Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz
tp-125-od.jpg
Kramer: tp-125-od

Computer Graphics Video, Stereo Audio & Bi-directional RS-232 Over Twisted Pair Transmitter With EDID & EMP Protection

The TP-125-od is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo audio and bi-directional RS-232 control command signals. The TP...

Inputs    1 WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
Output    1 RJ-45 OUT connector
Control    RS-232 2-pin terminal block
RS-232 Baud Rate    Up to 19200kbps
RS-232 Mode    Full-duplex
tp-125edid.jpg
Kramer: tp-125edid

Computer Graphics Video, Stereo Audio & Bi-directional RS-232 Over Twisted Pair Transmitter With EDID

The TP-125EDID is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo audio and bi-directional RS-232 control command signals. The...

Inputs    1 WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
Output    1 RJ-45 OUT connector
Control    RS-232 2-pin terminal block
RS-232 Baud Rate    Up to 19200kbps
RS-232 Mode    Full-duplex
tp125xl.jpg
Kramer: tp-125xl

XGA Twisted Pair Transmitter

The TP−125xl is an extended range twisted pair transmitter for computer graphics video, unbalanced stereo audio and bidirectional RS−232 control command signals. It...

tp-126-od.jpg
Kramer: tp-126-od

Computer Graphics Video, Stereo Audio & Bi-directional RS-232 Over Twisted Pair Receiver With EMP Protection

The TP-126-od is a twisted pair receiver for computer graphics video, unbalanced stereo audio and bi-directional RS-232 data signals. The TP 126-od receives a...

Inputs    1 RJ-45 LINE IN connector
Outputs    Video: 1 UXGA on a 15-pin HD connector; Audio: 1 S/PDIF on an RCA connector, 1 audio ANALOG on a 3.5mm mini jack
Max. Output Level    Video: 1.6V, Audio: 2.3V
Controls    Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBm (130m) @50MHz
RS-232 Baud Rate    Up to 19200bps
tp126xl.jpg
Kramer: tp-126xl

XGA Twisted Pair Receiver

The TP−126xl is an extended range twisted pair receiver for computer graphics video, unbalanced stereo audio and bidirectional RS−232 control command signals. The unit...

tp−219hd.jpg
Kramer: tp-129hd

2x1 XGA/HD Twisted Pr Trans

The TP−219HD is a high−performance twisted pair transmitter for computer graphics signals with resolutions up to and exceeding UXGA as well as HDTV signals up to 1080p....

tp133.jpg
Kramer: tp-133

VGA/A/DATA TP Transmitter

The TP−133 is a high−performance, extended range twisted pair transmitter for computer graphics video, balanced/unbalanced stereo audio and bidirectional RS−232...

tp134.jpg
Kramer: tp-134

VGA/A/DATA TP Receiver

The TP−134 is a high−performance, extended range twisted pair receiver for computer graphics video, balanced/unbalanced stereo audio and bidirectional RS−232 data...

tp-141.jpg
Kramer: tp-141

Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter

The TP-141 and TP-142 are an extended range twisted pair transmitter and receiver for computer graphics video (including HDTV) and unbalanced stereo audio signals, with high...

Inputs    Video: 1 computer graphics video on a 15-pin HD connector,Audio: 1 audio analog 3.5mm mini jack
Outputs    1 RJ-45 OUT connector
Max. Output Level    Video = 1V; Audio = 2.5V
Bandwidth (-3dB)    Audio: 20Hz–20kHz @0.5dB
Resolution    Exceeding UXGA
tp-142.jpg
Kramer: tp-142

Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver

The TP-141 and TP-142 are an extended range twisted pair transmitter and receiver for computer graphics video (including HDTV) and unbalanced stereo audio signals, with high...

Inputs    1 RJ-45 LINE IN connector
Outputs    Video: 1 computer graphics video on a 15-pin HD connector,Audio: 1 audio S/PDIF RCA connector, 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V, Audio: 2.5V
Controls    Level: –7.5dB to 4.4dB
EQ    0dB to 33dBm, (130m) @50MHz
tp-185.jpg
Kramer: tp-185

8-Channel Computer Graphics Video, Audio & Data Over Twisted Pair Transmitter

The TP-185 is a twisted pair transmitter for computer graphics, unbalanced stereo audio and RS-232/RS-485 signals. The TP 185 takes up to eight channels of...

Inputs    8 UXGA on 15-pin HD connectors (VGA through WUXGA, supporting HDTV and component (YPbPr) signals); 8 unbalanced stereo audio 3.5mm mini jacks
Outputs    8 TP on RJ-45 connectors
Range    Up to 100m (328ft)
Resolution    Up to WUXGA (1920 x 1200)
Max. Output Level    Video: 1.6Vpp; Audio: 2.3Vpp
tp-200axr.jpg
Kramer: tp-200axr

Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver

The TP-200AXR is a twisted pair receiver for computer graphics video and unbalanced stereo signals. The TP-100AXR converts the input signals into a twisted pair signal and the...

Inputs    1 RJ-45 LINE IN connector
Outputs    1 RJ-45 line loop out, 2 VGA on 15-pin HD connectors, 2 S/PDIF on RCA connectors, 2 audio analog 3.5mm mini jacks
Max. Output Level    Video: 1.8V, audio: 2.9V
Controls    Level: –7dB to 4dB; EQ.: 0dB to 16dB (60m) @50MHz
Resolution    Up to WUXGA
tp-202.jpg
Kramer: tp-202

Computer Graphics Video Over Twisted Pair Branching Receiver

The TP-202 is a twisted pair branching receiver for computer graphics video signals with resolutions from VGA up to UXGA and higher or HDTV signals. The TP 202...

Input    1 CAT 5 on an RJ-45 connector
Output    1 CAT 5 on an RJ-45 connector; 2 XGA on 15-pin HD (F) connectors
Diff. Gain (PAIR)    2.8%
K-Factor    0.1%
Max. Resolution    WUXGA & 1080p
tp-205a.jpg
Kramer: tp-205a

1:5 Computer Graphics Video, Audio, & RS-232 Twisted Pair Transmitter & Distribution Amplifier

The TP-205A is a high-performance distribution amplifier for computer graphics video signals with resolutions up to UXGA, RS-232 signals, and stereo or S/PDIF audio signals. The...

Input    Computer graphics video and looping computer graphics video on 15-pin HD connectors, unbalanced stereo audio on a 3.5mm mini jack, S/PDIF on an RCA connector, RS-232 on a terminal block connector
Outputs    5 RJ-45 connectors
Max. Output Level    Video: 1V; Audio: 2.3V
Max. Resolution    WUXGA & 1080p
Bandwidth (-3dB)    Audio: 20Hz to 20kHz @0.5dB
tp-210.jpg
Kramer: tp-210

1:10 Computer Graphics Video Over Twisted Pair Transmitter With Dual 15-pin HD Outputs

The TP-210 is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The TP 210...

Input    1 XGA on a 15-pin HD (F) connector
Outputs    2 XGA on 15-pin HD (F) connectors; 10 CAT 5 on RJ-45 connectors
Max. Output level    1.9Vpp/1.6Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.03% (XGA), 2.5% (CAT 5)
tp-210a.jpg
Kramer: tp-210a

1:10 Computer Graphics Video, Audio & RS-232 Twisted Pair Transmitter & Distribution Amplifier

The TP-210A is a high-performance distribution amplifier for computer graphics video signals with resolutions up to UXGA, RS-232 signals and stereo or S/PDIF audio signals. The...

Inputs    1 UXGA video on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 S/PDIF on an RCA connector, 1 RS-232 with 1 RxD line on a terminal block connector
Outputs    10 twisted pairs on RJ-45 connectors, 2 UXGA on 15-pin HD connectors, 2 unbalanced stereo audio on 3.5mm mini jacks, 2 S/PDIF on RCA connectors, 2 RS-232 with 2 TxD lines on terminal block connectors
Max. Output Level    Video 1.6V; Audio 2.3V
Power Outputs    12V DC 0.5A max via each RJ-45 output (PINs 4, 5)
Max. Resolution    UXGA & 1080p
tp-219hd.jpg
Kramer: tp-219hd

2x1 Computer Graphics & HDTV Video Switcher Over Twisted Pair Transmitter

The TP-219HD is a high-performance twisted pair transmitter for computer graphics signals with resolutions ranging from VGA through UXGA and higher as well as HDTV signals up to...

Inputs    2 XGA/HD on 15-pin HD (F) connectors. Input Select Button
Output    1 CAT 5 on an RJ-45 connector
Max. Output Level    1.5Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    2.3%
tp-300fw.jpg
Kramer: tp-300fw

FireWire ® Over Twisted Pair Transmitter/Receiver & Range Extender

The TP-300FW is a twisted pair transmitter or receiver for FireWire ® (IEEE 1394) signals. When used as a pair, one converts a FireWire ® signal into a twisted pair signal and...

Ports    1 serial 1394 port on a 6-pin connector, 2 CAT 5 ports on RJ-45 connectors
Transfer Rate    100Mbps
IEEE-1394 Standards    IEEE 1394a-2000, IEEE 1394-1995, IEEE 1394b-2002 at up to 100Mpbs
ESD Line Protection    IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact), IEC 61000-4-5 (lightning) 12A (8/20us), and IEC 61000-4-4 (EFT) 40A (5/50ns)
Power Source    12V DC, 60mA
tp-305a.jpg
Kramer: tp-305a

1:5 Computer Graphics Video, Audio & RS-232 Twisted Pair Receiver & Distribution Amplifier

The TP-305A is a high-performance twisted pair receiver for computer graphics video, audio and RS-232 signals. The TP 305A takes one twisted pair input and...

Input    1 LINE IN on an RJ-45 connector
Outputs    5 LINE OUT on RJ-45 connectors; 1 UXGA video output on a 15-pin HD connector; 1 unbalanced stereo audio on a 3.5mm mini jack; 1 S/PDIF output on an RCA connector; 1 RS-232 on a 2-pin terminal block connector
Max. Output Level    Video: 1.6V; Audio: 2.3V
Power Outputs    12V DC, 0.5A max via each RJ-45 output (pins 4, 5)
Max. Resolution    WUXGA & 1080p
tp-330fw.jpg
Kramer: tp-330fw

2-Port Firewire ® 400 Over Twisted Pair Range Extender/Hub

The TP-330FW is a twisted pair range extender/hub for FireWire ® (IEEE 1394) signals. When used as a pair, one TP 330FW converts a FireWire ® signal into a...

Ports    2 FireWire® ports on 6-circuit FireWire® 400 connectors; 1 STP/UTP port on an RJ-45 connector
Transfer Rate    400Mbps
IEEE 1394 Standards    IEEE 1394a-2000, IEEE 1394-1995 @400Mbps max
ESD Line Protection    IEC 61000 4 2 (ESD) 15kV (air), 8kV (contact), IEC 61000 4 5 (lightning) 12A (8/20us), and IEC 61000 4 4 (EFT) 40A (5/50ns)
Power Source    12V DC, 60mA
tp-400fw.jpg
Kramer: tp-400fw

FireWire Over Twisted Pair Transmitter/Receiver & Range Extender

The TP-400FW is a twisted pair transmitter or receiver for FireWire ® (IEEE 1394) signals. When used in pairs, one converts a FireWire ® signal into a twisted pair signal and...

Ports    1 1394 port on 6-pin serial connectors, front and rear panels; 2 CAT 5 ports on RJ-45 connectors
Transfer Rate    100Mbps
IEEE-1394 Standards    IEEE 1394a-2000, IEEE 1394-1995, IEEE 1394b-2002 at up to 100Mpbs
ESD Line Protection    IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact), IEC 61000-4-5 (lightning) 12A (8/20us), and IEC
Power Source    230V AC, 50/60Hz (115V AC, USA) 30VA
tp-41.jpg
Kramer: tp-41

Component Video & S/PDIF Audio Over Twisted Pair Transmitter

The TP-41 is a twisted pair transmitter for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio...

Input    1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF (digital audio) on an RCA connector
Outputs    1 RJ-45 CAT 5 shielded connector (Line Out)
Max. Output Level    Video: 2.1Vpp
Diff. Gain    0.15%
Diff. Phase    0.68Deg
tp410.jpg
Kramer: tp-410

1:10 XGA/A/Data TP Transmitter

The TP−410 is a high−performance distribution amplifier for computer graphics up to WUXGA or twisted pair video, unbalanced stereo or S/PDIF audio, and...

tp-42.jpg
Kramer: tp-42

Component Video & S/PDIF Audio Twisted Pair Receiver

The TP-42 is a twisted pair receiver for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio signals into a...

Input    1 RJ-45 CAT 5 shielded connector (line in)
Outputs    1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF (digital audio) on an RCA connector
Max. Output Level    Video: 2.1Vpp
Max. Resolution    1080i
Diff. Gain    0.15%
tp-45.jpg
Kramer: tp-45

Component Video Or Computer Graphics Video With Audio Over Twisted Pair Transmitter
The TP45 and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The...
Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
tp45edid.jpg
Kramer: tp-45edid

XGA/YUV + Audio TP Trans EDID

The TP−45EDID is a high−performance twisted pair transmitter for computer graphics or component video and unbalanced stereo audio signals. It converts the input signals...

tp46n.jpg
Kramer: tp-46n

XGA & YUV & Audio TP Receiver

The TP−46N is a twisted pair receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP−45 transmitter...

tp-50.jpg
Kramer: tp-50

1:2 Computer Graphics Video With S/PDIF Or Stereo Audio Twisted Pair Receiver

The TP-50 is a twisted pair receiver for computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP 50 converts the twisted pair signal...

Input    1 CAT 5 on an RJ-45 connector
Outputs    2 XGA outputs on 15-pin HD (F) connectors; 1 LINE LOOP on an RJ-45 connector; 2 unbalanced stereo audio outputs on 3.5mm mini jacks; 2 S/PDIF outputs on RCA connectors
Max. Output Level    Video: 2Vpp @max gain.; Audio: 4.6Vpp (analog)
Max. Resolution    WUXGA
Audio Bandwidth    22kHz
tp-573.jpg
Kramer: tp-573

HDMI, Bi-directional RS-232 & IR Over Twisted Pair Transmitter

The TP-573 is a twisted pair transmitter for HDMI, bi-directional RS-232 and infrared signals. The TP 573 converts the input signals to a twisted pair signal and...

Inputs    1 HDMI connector, 1 bi-directional IR port on a 3.5mm mini jack, 1 bi-directional RS-232 port on a 9-pin D-sub connector
Outputs    1 CAT 5 OUT on an RJ-45 connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI and HDCP
Power Source    12V DC, 510mA
tp574.jpg
Kramer: tp-574

HDMI Twisted Pair Receiver

The TP−574 is a DGKat™ twisted pair receiver for HDMI, bidirectional RS−232 and infrared signals. The TP−573 converts the input signals to a twisted pair...

tp575.jpg
Kramer: tp-575

1:2 HDMI Twisted Pair Receiver & Transceiver

The TP−575 is a DGKat™ twisted pair line driver for HDMI over twisted pair signals. The unit receives a twisted pair signal and outputs both an HDMI and twisted pair...

tp-576.jpg
Kramer: tp-576

HDMI, Data & IR Over Twisted Pair Transceiver

The TP-576 is a twisted pair (DGKat) line driver for HDMI, bi-directional RS-232 and infrared signals. The TP 576 receives an HDMI signal either from a local HDMI...

Inputs    1 HDMI connector; 1 CAT 5 on an RJ-45 connector
Outputs    1 CAT 5 on an RJ-45 connector; 1 HDMI connector
Ports    1 bi-directional IR port on a 3.5mm mini jack, 1 bi-directional RS 232 port on a 9-pin D-sub connector (for local control)
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI and HDCP
tp580r.jpg
Kramer: tp-580r

HDMI Twisted Pair Receiver

The TP−580R is a high−performance, HDBaseT twisted pair receiver for HDMI, bidirectional RS−232 and IR signals. The TP−580R receives an...

tp-580rxr.jpg
Kramer: tp-580rxr

HDMI Twisted Pair Receiver

The TP−580RXR is an extended range, HDBaseT twisted pair receiver for HDMI, bidirectional RS−232 and IR signals. The TP−580RXR receives an HDBaseT...

tp580t.jpg
Kramer: tp-580t

HDMI Twisted Pair Transmitter

The TP−580T is a high−performance, HDBaseT twisted pair transmitter for HDMI, bidirectional RS−232 and IR signals. The TP−580T inputs HDMI,...

tp580txr.jpg
Kramer: tp-580txr

HDMI Twisted Pair Transmitter

The TP−580TXR is an extended range, HDBaseT twisted pair transmitter for HDMI, bidirectional RS−232 and IR signals. The TP−580TXR inputs HDMI,...

tp581t.jpg
Kramer: tp-581t

HDMI Twisted Pair Transmitter

The TP−581T is a high−quality HDBaseT twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−581T...

tp582r.jpg
Kramer: tp-582r

HDMI Twisted Pair Receiver

The TP−582R is a high−quality twisted pair receiver for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects one of two HDMI...

tp582t.jpg
Kramer: tp-582t

HDMI Twisted Pair Transmitter

The TP−582T is a high−quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects...

tp-953.jpg
Kramer: tp-953

DVI & Audio Over Twisted Pair Transmitter

The TP-953 is a twisted pair transmitter for DVI video and unbalanced stereo, S/PDIF or TOSLINK ® audio signals. The TP 953 converts the input signals to a...

Inputs    1 DVI on a 24-pin Molex connector,1 analog audio on a 3.5mm mini jack,1 S/PDIF on an RCA connector,1 optical on a TOSLINK® connector
Outputs    2 CAT 5 OUT on RJ-45 connectors
Max. Data Rate    Supports up to 1.65Gbps per graphic channel
Indicators    IN, OUT, ON LEDs (green)
Power Source    12V DC, 460mA
tp-954.jpg
Kramer: tp-954

DVI & Audio Over Twisted Pair Receiver

The TP-954 is a receiver for DGKat ™ twisted pair signals. The TP 954 converts DVI and unbalanced stereo, S/PDIF, or TOSLINK ® audio signals to a twisted pair...

Inputs    2 CAT 5 IN on RJ-45 connectors
Outputs    1 DVI on a 24-pin Molex connector,1 analog audio on a 3.5mm mini jack,1 S/PDIF on a RCA connector,1 optical on a TOSLINK® connector
Max. Data Rate    Supports up to 1.65Gbps per graphic channel
Controls    EQ. select pushbutton
Indicators    IN, OUT, ON LEDs (green)
tr-1.jpg
Kramer: tr-1

Video Isolation Transformer

The TR1 is a high-resolution isolation transformer for composite video signals. The TR 1 completely isolates devices to eliminate video hum, ground loops, and DC...

Input    1 composite video, 1Vpp/75Ω on a BNC connector
Output    1 composite video, 1Vpp/75Ω on a BNC connector
Insertion Loss    0.8dB
Max. Output Level    4 Vpp/75Ω
Bandwidth (-3dB)    5.8MHz
tr-1a.jpg
Kramer: tr-1a

Balanced Mono Audio Isolation Transformer

The TR1A is a high-performance isolation transformer for balanced mono audio signals. The TR 1A completely isolates devices to eliminate hum, ground loops, and DC...

Input    1 balanced audio 4dBu/600Ω on a detachable terminal block
Output    1 balanced audio 4dBu/600Ω on a detachable terminal block
Max. Output Level    26dBu
Bandwidth (-3dB)    20Hz to 20kHz
S/N Ratio    -83dB @ 4dBu/1kHz
tr-1yc.jpg
Kramer: tr-1yc

S-Video Isolation Transformers

The TR1-YC is a high-performance isolation transformer for s-Video (Y/C) signals. The TR-1YC provides complete isolation between devices to eliminate hum, ground...

Input    1 s-Video on a 4-pin connector
Output    1 s-Video on a 4-pin connector
Insertion Loss    0.8dB
Bandwidth (-3dB)    5.8MHz
Diff. Gain    0.12%
tr-2a.jpg
Kramer: tr-2a

Balanced Stereo Audio Isolation Transformer

The TR-2A is a high-performance isolation transformer for balanced stereo signals. The TR-2A completely isolates devices to eliminate hum, ground loops, and DC...

Input    1 balanced stereo audio 4dBu/600Ω on detachable terminal block
Output    1 balanced stereo audio 4dBu/600Ω on detachable terminal block
Max. Output Level    26dBu
Bandwidth (-3dB)    20Hz to 20kHz
S/N Ratio    -83dBu @ 4dBu/1000Hz
tr-3.jpg
Kramer: tr-3

Video & Balanced Stereo Audio Isolation Transformer

The TR-3 is a high-performance isolation transformer for composite video and balanced stereo signals. The TR-3 provides complete isolation between devices to...

Inputs    1 composite video, 1Vpp/75Ω on a BNC connector; 2 balanced stereo audio 4dBu/600Ω on detachable terminal blocks
Outputs    1 composite video, 1Vpp/75Ω on a BNC connector; 2 balanced stereo audio 4dBu/600Ω on detachable terminal blocks
Insertion Loss    0.8dB (video)
Max. Output Level    Video: 4VPP/75Ω; Audio: 26dBu
Bandwidth (-3dB)    Video: <10Hz to 5.8MHz -3dB; Audio: 20Hz to 20kHz
va-10.jpg
Kramer: va-10

RGB Cable Delay Corrector

The VA−10 corrects skew (delay) errors in long RGB or twisted pair cable runs. Individual R, G, and B skew adjustments correct video delay errors in analog and twisted pair...

va-100p.jpg
Kramer: va-100p

10-Outlet 12V Power Supply

The VA−100P is a 10−port 12V DC power supply. It replaces up to ten separate 12−volt adapters for Kramer TOOLS™ and other models that use 12V DC power...

va-100p-5.jpg
Kramer: va-100p-5

10-Outlet 5V Power Supply

The VA−100P−5 is a 10−outlet universal switching power supply. It can supply 5V DC at up to 8A to power up to ten Kramer products that use an external 5V DC power...

va-130fw.jpg
Kramer: va-130fw

Firewire ® 800 Remote Repeater/HUB

The VA130FW is a high-performance bidirectional hub/repeater for 9-pin FireWire ® 800 (IEEE 1394b) signals. The VA 130FW increases the number of ports available...

Ports    2 FireWire® ports on 9-circuit FireWire® 800 connectors, 1 coax port on a BNC connector
Transfer Rate    800Mbps
IEEE 1394 Standards    IEEE 1394b-2002, IEEE 1394-1995, IEEE 1394b-2002 up to 800Mpbs
ESD Line Protection    IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact), IEC 61000-4-5 (lightning) 12A (8/20us), and IEC 61000-4-4 (EFT) 40A (5/50ns)
Power Source    5V DC, 60mA
va-14.jpg
Kramer: va-14

4 Channel Balanced Audio Mixer

The VA14 is a high-performance 4-channel mixer for balanced mono audio signals on XLR connectors. The VA 14 inputs four channels of any combination of balanced...

Inputs    4 balanced audio, line or mic, on XLR (F) connectors
Outputs    2 audio, balanced on XLR (M) connectors; 1 headphone output on a 6.5mm connector
Max. Output Level    Line: 20Vpp; Phones: 4.5Vpp; Mic: 300mVpp
Bandwidth (-3dB)    >40kHz
S/N Ratio    Mic in, phones out: 45.3dB; line in, phones out: 83.3dB; line in, line out: 84.3dB;mic in, line out: 64dB
va-1dvin.jpg
Kramer: va-1dvin

DVI EDID Emulator

The VA−1DVIN is an EDID emulator for DVI−D signals. The unit can capture an EDID setting in non−volatile memory from the output allowing convenient and reliable...

va-1dvin.jpg
Kramer: va-1dvin

DVI EDID Emulator
The VA1DVIN is an EDID emulator for DVI-D signals. The VA 1DVIN can capture an EDID setting in non-volatile memory from the output allowing convenient and reliable...
Input    1 x DVI dual link, DVI 1.0, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Output    1 x DVI, dual Link, DVI 1.0, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Bandwidth    3.3Gbps
Controls    Capture EDID button
Power Source    5V DC, 20mA
va-1vgan.jpg
Kramer: va-1vgan

Computer Graphics Video EDID Emulator
The VA1VGAN is an EDID emulator for computer graphics video signals. The VA 1VGAN can capture an EDID setting in non-volatile memory from the output allowing...
Input    1 XGA input on a 15-pin HD connector
Output    1 XGA output on a 15-pin HD connector
Max. Output Level    >2Vpp
Bandwidth (-3dB)    1.8GHz
Diff. Gain    0.02%
va-1vgan.jpg
Kramer: va-1vgan

XGA EDID Emulator

The VA−1VGAN is an EDID emulator for computer graphics video signals. The unit can capture an EDID setting in non−volatile memory from the output allowing convenient and...

va-1vgaxl.jpg
Kramer: va-1vgaxl

Computer Graphics Video EDID Capture/Emulator
The VA1VGAxl is an EDID emulator for computer graphics video signals. The VA 1VGAxl can capture an EDID setting in non-volatile memory from the output or present any...
Input    1 VGA (up to WUXGA) on a 15-pin HD connector
Output    1 VGA (up to WUXGA) on a 15-pin HD connector
Max. Output Level    >2Vpp
Bandwidth (-3dB)    1.8GHz
Diff. Gain    0.02%
va-1vgaxl.jpg
Kramer: va-1vgaxl

XGA EDID Emulator

The VA−1VGAxl is an EDID emulator for computer graphics video signals. The unit can capture an EDID setting in non−volatile memory from the output or present any one of...

va-256xl.jpg
Kramer: va-256xl

Audio Delay For Balanced Stereo Audio

The VA256xl is a high-performance audio delay for balanced stereo audio signals. The VA 256xl synchronizes the audio and video signals when they are out of sync....

Input    4dBu/30kΩ on a detachable terminal block connector
Outputs    4dBu/50Ω on a detachable terminal block connector
Max. Input/Output Level    12dBu balanced
Bandwidth    20Hz to 20kHz
THD Noise    <0.01%, 4dBu 1kHz
va-2h.jpg
Kramer: va-2h

HDMI EDID Reader

The VA−2H is a diagnostic and debugging tool for installers working with HDMI devices. The unit can switch three different EDIDs to the HDMI input. The installer can...

va-4h.jpg
Kramer: va-4h

4−Channel HDMI Controller

The VA−4H is an EDID controller for HDMI signals. The unit inputs up to four HDMI channels and allows the user to select an EDID for each channel from the display, an...

va-50p,jpg
Kramer: va-50p

6-Outlet 12V DC Power Supply

The VA−50P is a 6−port 12V DC power supply. It replaces up to 6 separate 12 volt adapters for Kramer TOOLS™ and other models that use 12V DC power

va-8xl,jpg
Kramer: va-8xl

8-Channel Balanced Stereo Audio Amplifier

The VA-8xl is a high-performance 8 channel-balanced stereo input volume controller for balanced audio signals on terminal block connectors. The volume of each L & R stereo channel...

Input    8 balanced stereo audio 4dBu/30kΩ on detachable terminal blocks
Output    8 balanced stereo audio 4dBu/50Ω on detachable terminal blocks
Gain    -95dB to 31dB
Max. Output Level    >20dBu balanced (THD N <0.01)
Bandwidth ( - 3dB)    20Hz to 40kHz
vm-100cb.jpg
Kramer: vm-100cb

1:10 Component Video Distribution Amplifier

The VM-100CB is a high-performance distribution amplifier for component video signals. The VM-100CB takes one input, provides correct buffering and isolation, and...

Input    1 component video (Y, Pb/Cb, Pr/Cr), looping on BNC connectors
Outputs    10 component video (Y, Pb/Cb, Pr/Cr) on BNC connectors
Max. Output level    2.2Vpp
Bandwidth (-3dB)    450MHz
Diff. Gain    0.03%
vm-1010.jpg
Kramer: vm-1010

1:10 Composite Video Distribution Amplifier
The VM1010 is a high-performance distribution amplifier for composite video. The VM 1010 can also be configured as a 1:5 distribution amplifier for s-Video (Y/C)...
Inputs    2 Composite/Component Video, Looping, 1Vpp/75Ω on BNC Connectors With Termination Switch
Outputs    2x5 Composite/Component Video, 1Vpp/75Ω on BNC Connectors
Max. Video Output    1.8Vpp
Video Bandwidth (-3dB)    235MHz
Diff. Gain    0.2%
vm-1021.jpg
Kramer: vm-1021

1:20 Composite Video Distribution Amplifier

The VM1021 is a high-performance distribution amplifier for composite or SDI video signals. The VM 1021 provides controls to compensate for signal losses inherent...

Input    1 Composite Video Or A Single Component, Looping, 1Vpp/75Ω on BNC Connectors With Termination Switch
Outputs    20 Composite/Component Video, 1Vpp/75Ω on BNC Connectors
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.1%
Diff. Phase    0.07deg
vm-1055.jpg
Kramer: vm-1055

1:5 RGBHV Video Distribution Amplifier

The VM1055 is a high-performance distribution amplifier for RGBHV video signals. The VM 1055 provides correct buffering and isolation and distributes the signal...

Inputs    1x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors, (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510O)
Outputs    5x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510O)
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    300MHz
Diff. Gain    0.1%
vm-10hd.jpg
Kramer: vm-10hd

1:10 HD-SDI Video Distribution Amplifier
The VM10HD is a high-performance distribution amplifier for HD-SDI signals. The VM 10HD takes one input, provides reclocking and equalization and distributes the...
Input    1 SMPTE-259M, 292M, 344M serial video, 75Ω on a BNC connector
Outputs    11 equalized and reclocked SMPTE-259M, 292M, 344M outputs, 75Ω on BNC connectors
Max. Output level    800mVpp/75Ω
Maximum Data Rate    1.485Gbps
Coupling    AC
vm-10hdxl.jpg
Kramer: vm-10hdxl

1:10 3G HD-SDI Distribution Amplifier

The VM10HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The VM 10HDxl takes one input, provides reclocking and equalization and...

Inputs    1 SMPTE-259M/292M/424M serial video, 75Ω on a BNC connector
Outputs    10 equalized and reclocked SMPTE-259M/292M/424M outputs, 75Ω on BNC connectors;1 looped GENLOCK 75Ω/Hi-Z on a BNC connector
Max. Output level    800mVpp/75Ω
Maximum Data Rate    Up to 2.97Gbps
Coupling    AC
vm-10xl.jpg
Kramer: vm-10xl

1:10 Composite Video & Stereo Audio Distribution Amplifier

The VM10xl is a state of the art, broadcast quality 1:10 distribution amplifier for composite or SDI video signals with unbalanced stereo or balanced mono audio. The VM...

Inputs    1 Composite Video, Looping, 1Vpp/75Ω with Termination Switch on BNC Connectors. 2 Balanced Stereo/Mono Audio, Looping, 1Vpp/50kΩ on RCA Connectors
Outputs    10 Composite Video, 1Vpp/75Ω on BNC Connectors. 10 Balanced Stereo/Mono Audio, 1Vpp/50Ω on RCA Connectors
Max. Output Level    Video: 1.6Vpp; Audio: 26.5Vpp
Bandwidth (-3dB)    Video 360MHz; Audio 100kHz
Diff. Gain    0.07%
vm-1110xl.jpg
Kramer: vm-1110xl

1:10 Balanced Mono Audio Distribution Amplifier

The VM1110xl is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. The VM 1110xl can also be configured as a 1: 5...

Inputs    2 balanced stereo audio 4dBu/50kΩ on XLR (F) connectors
Outputs    10 balanced stereo audio 4dBu/50Ω on XLR (M) connectors
Max. Output Level    23.8Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    89.3dB
vm-1120.jpg
Kramer: vm-1120

1:10 Balanced Stereo Audio Distribution Amplifier

The VM1120 is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. The VM 1120 can also be configured as a 1:20...

Inputs    2 balanced stereo or 4 balanced mono audio 4dBu/50kΩ on XLR (F) connectors
Outputs    10 balanced stereo or 20 balanced mono audio 4dBu/50Ω on XLR (M) connectors
Max. Output Level    23.8Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    89.3dB
vm-114h.jpg
Kramer: vm-114h

2x1:4 HDMI TP Switcher & DA

The VM−114H is a switcher/distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable input signals and distributes...

vm-114h2c.jpg
Kramer: vm-114h2c

2x1:4 HDMI/TP Transmitter

The VM−114H2C is a high−performance switcher and distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable...

vm-114h4c.jpg
Kramer: vm-114h4c

2x1:4 HDMI Switcher, Twisted Pair Distribution Amplifier & Transmitter

The VM-114H4C is a high-performance switcher and distribution amplifier for HDMI and twisted pair signals. The VM 114H4C reclocks and equalizes one of two...

Inputs    1 HDMI connector; 1 twisted pair on an RJ-45 connector
Outputs    4 twisted pairs on RJ-45 connectors
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Compliance with HDMI Standard