| Sensor |
1/2" progressive scan |
| Pixel Clock |
28.64 MHz |
| Frame rate full frame |
16.037 frames/second (1068 lines per frame) |
| Active area |
6.4 (h) x 4.8 (v) mm |
| Cell size |
4.65 x 4.65 pixels |
| Active pixels |
1380 x 1035 |
| Read-out modes, Full |
1380 (h) x 1035 (v) 16 fps |
| Read-out modes, 1/2 partial scan |
1380 (h) x 513(v) 30 fps |
| Read-out modes, 1/3 partial scan |
1380 (h) x 341 (v) 43 fps |
| Read-out modes, 1/6 partial scan |
1380 (h) x 171 (v) 75 fps |
| Read-out modes, Horizontal binning |
690 (h) x 1035 (v) 16 fps |
| Read-out modes, Vertical binning |
1380 (h) x 527 (v) 32 fps |
| Read-out modes, H V binning |
690 (h) x 527 (v) 32 fps |
| Read-out modes, Smear-less |
Smear reduction |
| Read-out modes, Frame-delay readout |
For multi-camera read-out |
| S/N ratio |
>50dB (0dB gain) |
| Video output |
Composite VS signal, 1Vp-p, 75 Ω Video signal, 0,7Vp-p (selectable) |
| Gain |
Manual, -3 to 12 dB Automatic, 0 to 12dB |
| Synchronization |
Int. X-tal, Ext. HD/VD or random trigger |
| Inputs, Trigger |
4V, TTL |
| Inputs, HD/VD sync |
4V, 75 Ω or High Z (switchable) |
| Outputs, HD / VD sync. |
4V, 75 Ω |
| Outputs, WEN (Write Enable) |
4V, 75 Ω |
| Outputs, EEN (Exposure Enable) |
4V, 75 Ω |
| Outputs, Pixel clock |
4V, 75 Ω |
| Trigger modes |
Continuous, EPS (Edge Pre-Select), PWC (Pulse Width Control), Long time exposure, Smear reduction and Frame-delay readout |
| Electronic shutter, Pre-set shutter |
1/16 to 1/200,000 in 16 steps |
| Electronic shutter, Programmable exposure (PE) |
1.3H to 1000H (75.9 μs to 59.8 ms) |
| Electronic shutter, Pulse Width |
1.3H to 2000H (75.9μs μs to 116 ms) |
| Electronic shutter, Long time exposure |
2 frames to 8 |
| Accumulation |
HD synchronous or HD asynchronous |
| Control interface |
RS-232C, short ASCII commands |
| Functions controlled by RS-232C |
Scanning format, Trigger modes, Readout modes, Programmable exposure, Shutter, Gain, Pixel clock output, Sync on/off, Black level, Manual gain, AGC, Gamma |
| Functions controlled by internal DIP-switches |
VD input/output, HD input/output, HD/VD 75 Ω termination on/off |
| Operating Temperature |
-5 degree C to 45 degree C |
| Humidity (operation) |
20 - 90% non-condensing |
| Storage temp./humidity |
-25 degree C to 60 degree C / 20 to 90% |
| Vibration |
10G (20Hz to 200 Hz XYZ) |
| Shock |
70G |
| Regulations |
CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
| Power |
12V DC /-10%. 1.8W |
| Lens mount |
C-mount |
| Dimensions (H x W x L) |
29 x 44 x 66 mm |
| Weight |
150 g |
