tmc-2030cl.jpg View Larger Image (in new window)

JAI Pulnix : TMC-2030CL

By: JAI Pulnix
JAI Pulnix Industrial-Grade Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1" 2MP Color Progressive Scan CCD HDTV-Format Camera, Camera Link Interface, Non-RoHS With Lead Processing

The JAI TMC-2030CL is a non-RoHS, with lead processing version of the RMC-2030CL camera.

The TMC-2030CL is a compact, high-resolution (2 Megapixels) monochrome progressive scan CCD camera with a wide-screen field of view (FOV) of 1920 x 1080 pixels. The camera features a dual-tap front-end, automatic channel balancing, Camera Link digital output, and a frame rate of 32 fps at full resolution. A single-tap mode at 17 fps is user selectable. The TMC 2030CL features the Kodak KAI-2093 1" CCD imager with a Bayer color filter array for host-based color interpolation.

The TMC2030CL delivers an outstanding signal-to-noise ratio of >57 dB in typical operation. A high performance front-end provides 12-bit linear output, or can be set to generate 10-bit/8-bit images modifiable by a patent-pending, built-in look-up table (LUT). The TMC-2030CL camera has a flexible programmable shutter capable of speeds from 1/32 to 1/16,000 second in one-line increments of 27.5 μs. Other advanced features include defective pixel compensation, and a PIV mode.

Camera parameters can be uploaded from the PC to the camera. Once these parameters are stored in EEPROMs, an instantaneous change from one setting to another can be done with a delay of a few frames in between.

Some of the functions that can be controlled by this interface are: manual, async and pulse-width control shuttering; save, load and report settings; and channel auto balancing.

→ 1" progressive scan IT CCD imager (KAI-2093)
→ 1920(H) x 1080(V) pixels (HDTV format)
→ 7.4 μm square pixels
→ 32 fps in dual-tap mode
→ SW selectable single-tap mode @ 16 fps
→ 12-bit A/D (linear) or 8-bit/10-bit with look-up table (LUT)
→ Digital Camera Link output and analog output
→ Full-frame shutter to 1/16,000 sec.
→ Asynchronous reset, no-delay, pulse width control shutter
→ Defective pixel compensation
→ PIV (particle imaging velocimetry) mode
→ Automatic channel balancing
→ GUI or serial commands for external control

Sensor 1" progressive scan interline transfer CCD
Active area 14.2mm x 8.0mm
Active pixels 1920 (H) x 1080 (V)
Cell size 7.4 μm x 7.4 μm
Readout modes 1920 (H) x 1080 (V) @ 32 Hz (dual-tap) or 16 Hz (single-tap) selectable
Synchronization Internal/External auto switch; HD/VD, 4.0 Vp-p impedance 4.7K ®; VD = 32.3 Hz ± 2%, non-interlace; HD = 36.4 kHz ± 2%
Pixel clock 40.00 MHz
S/N ratio >57 dB
Sensitivity, Color 3.6 lux f=1.4 (no shutter) @ 32 fps, Pixel sensitivity: 14 μV/e
Video output, Analog 1.0 Vp-p, 75 Ohm
Video output, Digital 8-bit x 2-tap Base Camera Link; 10-bit x 2-tap Base Camera Link; 12-bit x 2-tap Base Camera Link
Color (RMC/TMC-2030 only) Raw Bayer output for host-based interpolation
Gamma Programmable LUT (1.0 std)
Shutter speed (programmable) 1/32 to 1/16,000 sec in increments of 27.5 μs
Lens mount C, F, M42 mount (use >1" format lenses)
Power 12V DC ± 10%, 520 mA (typical at 25° C)
Operating temperature -10° C to 50° C
Vibration 7 Grms (10 Hz to 2000 Hz) Random
Shock 70 G, 11 ms, half-sine
Dimensions (H x W x L) 51 mm x 51 mm x 74 mm
Weight 188 g (without tripod)


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.