CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
3-CMOS Prism-Based RGB Color Line Scan Camera With Camera Link

The JAI LT-200CL is an industrial grade color line scan camera based on JAI's advanced prism technology. Featuring a light beam splitter prism and 3 x 2048 pixels custom-designed CMOS sensors, the LT 200CL captures the red, green and blue spectral bands in 3 separate channels simultaneously through the same optical path and with co-site sampling accuracy.

The high color accuracy provided with the LT200CL, makes it ideal for demanding vision applications such as fruit and vegetable sorting, 2D/3D print inspection, wood inspection and surface inspection of e.g. flat panels and paint coating.

The LT-200CL is capable of running at scan rates up to 30383 lines/second at 80 MHz data clock while maintaining image quality at a signal-to-noise ratio of 57 dB.

For flexible setting of scan rates and resolution the LT 200CL features various pixel readout modes like full readout, binning, sub-sampling and windowing readout. Using sub-sampling or windowing readout modes the camera is capable of running at scan rates up to 60766 lines/second at 1024 pixel resolution.

A number of built-in pre-processing functions are available including flat-field compensation, flat-shading compensation and color shading compensation.

Gain correction as well as the electronic shutter can be set individually for the red, blue and green channels providing even further flexibility in image optimization.

Other features of the LT-200CL include one-push automatic white balance, a noise reduction function and a test pattern generator that can be applied as a set-up and installation aid to check the performance of the camera.

The LT 200CL camera is equipped with a Camera Link interface providing 24bit (3 x 8 bit) or 30bit (3x10bit) outputs.

To maximize the cameras ability to withstand the rigors of industrial environments, all LT200CL cameras undergoes extensive shock (50G) and vibration testing (3G) to ensure reliable operation over very long operation periods.

A ridged housing design provides maximum surface area for heat dissipation resulting in excellent temperature management and optimal image quality.

JAI's prism-block technology uses a single optical plane and enables users to avoid the complex alignment and encoding issues related to off-axis viewing, variations in conveyor speeds, surface undulations, or objects that roll or move as they pass through the camera's field of view.

The dichroic coatings used on the prism provide steep spectral curves, which minimize the color "crosstalk" and thereby increase the color precision when compared to tri-linear or dual-line color solutions.

These hard dichroic coatings also don't suffer degradation, providing accurate color performance over a longer product lifespan.

→ 3-CMOS prism-based RGB color line scan camera with Camera Link output
→ Dichroic RGB beam splitter prism with 3 sensors
→ 3 sensors with 2048 pixels per sensor, 14.0 μm x 14.0 μm pixel size
→ 80 MHz pixel clock
→ Adjustable line rate to 30383 lines per second
→ Binning, windowing & sub-sampling modes
→ 28.672 mm sensor scan width
→ 3 x 8 bits or 3 x 10 bits output through Camera Link interface
→ Line rate up to 30383 lines per second at 80 MHz pixel clock
→ One-push automatic white balance via gain or shutter
→ Flat field correction and color shading correction
→ Knee and binning functions for extended dynamic range and sensivity
→ Sub-sampling and windowing readout
→ Set-up and installation aid with built-in test generator
→ Available with M52 mount (standard) or Nikon F-mount
→ Short ASCII commands for set-up via RS 232C or Camera Link
→ Setup by Windows XP/Vista/Windows 7 software

Low-noise operation (S/N) 57 dB providing superior image quality
Scanning system Line sensor with internal clock
Pixel clock 80.00 MHz
Line rate, Standard 32.9μs (Full resolution/binning/internal trigger)
Line rate, Programmable 32.9μs to 16.844ms, 12.5ns increments
Sensor 3 CMOS line sensors mounted on RGB beam splitter prism
Sensor scanning width 28.672 mm
Cell size 14.0 (h) x 14.0 (v) μm
Active pixels 3 x 2048 (h) 3 x 1024 (h) with 2:1 binning
Sensitivity (sensor) Radiometric: 27nJ/cm2
Sensitivity (standard) 2800 Lux (7800K, gain = low, shutter = OFF, G = 0 dB, F2.8, 100% video)
S/N ratio 57 dB on green with gain = 0 dB
Video output 24 bit (3 x 8) in CL base configuration; 30 bit (3 x 10) in CL medium configuration
Gain, Ref. set Analog gain= Low (0dB) or High ( 6dB)
Gain, Master tracking Master: 0 dB to 8 dB; R, B: -4 dB to 6 dB
Gain, Individual mode R/G/B: -4 dB to 14 dB
White balance Manual, fixed or one-push; Adjustable range 4000 K to 9000 K; Fixed: 4000 K, 4600 K or 5600 K
Knee correction Individual RGB knee point and slope
Shading correction Individual RGB flat or RB to G
Flat-field correction Two point pixel-to-pixel correction
Synchronization Internal X-tal or external trigger
Trigger modes No-shutter, shutter-select and pulse width control
Programmable exposure 25.8μs to 13.209 msec. in 12.5 ns increments
Functions controlled by RS 232C or CL Trigger modes, scan rate, exposure time, gain/black level, shading correction, flat-field correction, white balance, knee-function, diagnostics
Diagnostics Test pattern generator (Color bar, gray pattern and white). LED for power
Lens mount M-52 mount. (Standard) Nikon F-mount. (Factory option)
Sensor alignment Better than ±0.1 mm
Operating temperature -5°C to 45°C/20 - 80% non-condensing
Storage temp./humidity -25°C to 60°C/20 - 80% non-condensing
Vibration 3G (20Hz to 200Hz, XYZ direction)
Shock 50G
Regulations Emission: CE CISPR Pub. 22 (EN55022) Immunity: CISPR Pub. 24, IEC61000-4-2 Conforming level 4, FCC Part15 Class B RoHS
Power 12V DC -10% to 24V DC 10% 450 mA (Typical) - 480 mA (Max.)
Dimensions 90 mm (H) x 90 mm (W) x 90 mm (D) (without connector and lens mount protrusion)
Weight 830 g

facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.