rm-675-nir.jpg View Larger Image (in new window)

JAI Pulnix : RM-675-NIR

By: JAI Pulnix
JAI Pulnix Industrial-Grade Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1/2" Monochrome Interlaced Scan CCD Camera, CCIR RoHS

The JAI RM-675NIR provides users with a 1/2" format interlaced camera with sensitivity equal to or greater than many 2/3" cameras. The Sony ICX429AL CCD imager offers superior light gathering ability due to its advanced micro lens technology and its extended sensitivity in the near-infrared (NIR) portion of the spectrum.

An integrated lens controller enables users to remotely operate the RM 675NIR's motorized lenses, pan & tilt heads, or any 3 external control channels. The single 15-pin connector is used for power, camera control, and video output, making installation clean and simple. All camera features are controllable via RS-232 commands over this single interface cable.

Designed with small size and ruggedness in mind, the RM675NIR camera is suitable for a wide range of industrial, defense, and homeland security applications. Advanced options include Auto Level Control (ALC) to automatically adjust gain and shutter settings during changing light conditions; conformal coating; pixel blemish compensation; and extended temperature capability for operating in temperatures from -40 degrees C to 65 degrees C.

→ 1/2" interlaced camera with extended NIR sensitivity

Sensor 1/2" CCD NIR interlace ICX429AL
Active pixels 752 (H) x 582 (V)
Chip size 7.4 x 5.95 mm
Cell size 8.6 μm x 8.3 μm
Scanning 625 lines/50 Hz
Synchronization Internal/external auto switch; HD/VD 4.0 Vp-p impedance 10K Ohm; VD = interlace/non-interlace ; HD = 15.62 kHz ± 5%
TV resolution 560 (H) x 420 (V)
S/N ratio >53 dB min. (AGC Off)
Sensitivity 0.10 lux (f=1.4)
High sensitivity option Up to 100X increase in low-light sensitivity (reduced resolution)
Video output 1.0 Vp-p composite video, 75 Ohm
Gamma 0.45/1.0 (RS-232 controlled), 1.0 Factory Default
Lens mount C-mount (adjustable)
Power requirement 12V DC, 150 mA typical at 25° C
Operating temperature -10° C to 50° C
Storage temperature -50° C to 70° C
Vibration 7 Grms (20 Hz to 2000 Hz) Random
Shock 70 G, 11 ms, half-sine
Dimensions (H x W x L) 32 x 42 x 48.48 mm with mechanical enclosure, 29.3 x 39.4 x 35.66 mm without mechanical enclosure
Weight 113 g with mechanical enclosure, 69 g without mechanical enclosure


facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.