Sierra Pro 500MHz Wideband Video Routing Switcher Up To 64x64

The Sierra Pro 64 XL routing switchers are full-featured 500MHz routing switchers for RGBHV, RGBS, component video (RGB/YUV) and s-Video (Y/C) signals. The Sierra Pro 64XL routing switchers can be ordered as a 5-channel (RGBHV), 4-channel (RGBS), 3-channel (RGB/YUV) or 2-channel s-Video (Y/C) system. The H and V frames can also be ordered with high bandwidth video boards in place of sync (composite sync) board(s) so video can be input into all channels (or levels) of the routing switcher. Companion monaural analog audio is available in a 3RU frame. Two frames can be combined for analog stereo audio in 6RU.

Optional Configurations :
Sierra Pro 6464V5xl — 64 x 64 five-channel 500MHz at -3dB wideband video routing switcher
Sierra Pro 6448V5xl — 64 x 48 five-channel 500MHz at -3dB wideband video
Sierra Pro 6432V5xl — 64 x 32 five-channel 500MHz at -3dB wideband video
Sierra Pro 4864V5xl — 48 x 64 five-channel 500MHz at -3dB wideband video
Sierra Pro 4848V5xl — 48 x 48 five-channel 500MHz at -3dB wideband video
Sierra Pro 4832V5xl — 48 x 32 five-channel 500MHz at -3dB wideband video
Sierra Pro 3264V5xl — 32 x 64 five-channel 500MHz at -3dB wideband video
Sierra Pro 3248V5xl — 32 x 48 five-channel 500MHz at -3dB wideband video
Custom 4-level or 5-level Video optional at additional cost. To order, specify “V4V’ or “V5V” option – i.e. 4864V5Vxl

→ Sierra Pro 64 XL
→ 500MHz bandwidth at -3dB fully loaded
→ Up to 64 x 64 in 20RU (RGBHV configuration)
→ Very Low Crosstalk - 80dB @ 1MHz
→ Matrix Mapping Universal Breakaway™ Switching for multi-format use
→ Video Follow Sync™ Switching design eliminates glitches during switching
→ Room grouping of inputs for flexible configuration in multi-room applications
→ Digital Sync Channels (HV) - USP™ Sync Technology re-shapes and re-squares sync to output correct TTL level. Input Detection 200mv.
→ Video mute capability
→ Genlock input for vertical interval switching
→ IP and RS-232 control
→ Full range of remote control panels available
→ Redundant power supplies standard with primary & redundant status indicators and dual AC inlets
→ Wideband Video
→ Input
→ Output
→ Analog Audio
→ Input
→ Output
→ Control
→ General

Bandwidth	500MHz @ -3dB
Video Gain	Unity
Crosstalk	-80dB @ 1MHz
Switching Speed	Deterministic
Video Level	0.3V to 2.5V p-p
Impedance	75 Ohm
Return Loss	< -30dB @ 5MHz
Connector Type	BNC
Video Level	0.2V to 5V p-p
Impedance	75 Ohm
Return Loss	< -30dB @ 5MHz
Connector Type	BNC
Input Adjust Range	20.5dB to -8dB
Output Adjust Range	15dB to -59.5dB and fully off (MUTE)
Frequency Response	20Hz to 20KHz /-0.1dB
Dynamic Range	90dB ref. 24dBu
Crosstalk	>80dB @ 1KHz, >60dB @ 10KHz
IM & THD	0.05% 24dBu
Maximum Source Level	24dBu
Impedance	> 10K Ohm balanced
Connector Type	DB25
Maximum Source Level	24dBu
Impedance	150 Ohm balanced
Connector Type	DB25
Serial	3 general Purpose 9 pin-D, each switchable RS-232 or RS-422, 9600, 38400, 115200 baud
Serial Protocols	SVS host, simple Kramer, and select others
Ethernet	10/100 Base-T, full duplex, RJ-45 connector
Ethernet Protocols	ARP, ICMP, TCP/IP, Telnet, HTTP
Web Server	For control
Control Panels	Supports SCP programmable control panels
Rack Unit Size/Frame	4RU per signal (20RU for RGBHV)
Dimensions	9”w x 7”h x 20 3/8”d, Mounts in standard 19” rack, Depth measurements do not include front panel hardware or rear cabling
Power	90 VAC->240 VAC 50/60 HZ (<150 Watts) auto-detecting
Redundant Power Supply	Standard-dual AC inlets per frame
Storage Temperature	-40º to 150º F
Operating Temperature	30º to 100º F ambient
Humidity	10% to 90 % non-condensing