Search
stc-sb152poe.jpg View Larger Image (in new window)

Sentech : STC-SB152POE

By: Sentech
http://www.avsupply.com/images/logos/sentech-logo.gif
Industrial, USB, & Medical Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101, sales@avsupply.com, or fax (858) 300-4193
19 fps, 1.2MP, B/W GigE camera, w/o IR cut filter, w/ POE

The STC-SB152POE is part of Sentech's Brand New Power over Ethernet GigE camera series. It features a 1/2" monochrome UXGA sensor, 19fps and communication over a 6 pin Hirose or Ethernet connector. The STC-SB152POE boasts a compact 35(w) x 35(H) x 55.9 (D) mm size, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam™, and is compatible with all standard industry drivers. The GigE PoE series is available now at an extremely low cost.

STC-SB152POE features include:

  • User Programmable AOI
  • Power Over Ethernet
  • 1.3 Megapixel Resolution with 19 fps

Imager

1/2" interline SXGA monochrome progressive CCD: ICX205AL

Total Picture Element

1434 (H) x 1050 (V)

Active Picture Element

SXGA: 1360 (H) x 1040 (V)

Cell Size

4.65 (H) x 4.65 (V) µm

Scanning System

Progressive

Vertical Frequency (Frame Rate)

19.25954 Hz at full resolution 0.31387 to 77.03817 Hz changeable via the communication (Frame rate depends on the AOI setting) Maximum frame rate (77.03817 Hz) is when vertical resolution AOI setting is 199.

Horizontal Frequency

20.5688 kHz

Pixel Frequency

36.818175 MHz

Noise Level

-

- @ 8Bit Output

≤ 3 Digit (Gain 0 dB)

- @ 10Bit Output

≤ 12 Digit (Gain 0 dB)

- @ 12Bit Output

≤ 48 Digit (Gain 0 dB)

Minimum Scene Illumination

TBD Lux at F1.2, 19.25954Hz

Sync System

Internal

Video Output

Digital 8, 10 or 12 bit Raw Data

Interface

PoE : IEEE802.3af CLASS2 (1000BASE-T)

Protocol

GigE Vision® 1.2 and GenICam™ 2.0 compliant

Exposure Time

Preset continuous mode: 10 useconds to 16,777,215 useconds Preset trigger mode: 10 useconds to 16,777,215 useconds Pulse width mode: 10 useconds to Unlimited

ALC

AE and AGC (ON/OFF)

Gain

0 to 20.4 dB

Gamma

Gamma 1.0 (Factory default) or uploadable gamma table

AOI Function

Variable AOI setting via the communication

Smear Reduction

Selectable ON/OFF via the communication

Color Interpolation

N/A

White Balance

N/A

Operation Mode

Edge preset trigger, Pulse width trigger (unlimited long exposure)

Communication

UART communication through Ethernet port

I/Os

One opt isolated input and two open collector outputs

Power

-

- Input Voltage

+10.8 to +26.4 Vdc via power-I/O connector or Power over Ethernet (Power-I/O connector power supply is prioritized.)

- Consumption

12V: 2.9W / 2.8W, PoE: 3.3W / 3.1W

Dimensions

35 (W) x 35 (H) x 55.9(D) mm excluding connectors

Optical Filter

No Filter

Optical Center Accuracy

Positional accuracy in H and V directions: +/- 0.3 mm Rotational accuracy of H and V: +/- 1.5 deg.

Material

Aluminum (AC)

Lens Mount

C mount

Connector

RJ45 connector; Power/IO connector: HR10A-10R-6PB (Hirose) or equivalent

Camera Mount Screws

Two 1/4” Tripod screw holes: (One on each top and bottom plate), Twelve M4 screws holes: (Four on each top and bottom plate, two on each side plate)

Weight

Approx. 130

Operating Temperature

 

- Minimum

Environmental Temperature -5⁰C

- Maximum

Camera housing temperature (top plate) shall not exceed 65 deg. C (This corresponds to an environmental temperature of approximately 40 deg. C)

Storage Temperature

Environmental Temperature: -30⁰C to 65⁰C

Vibration

20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each

Shock

Acceleration 38G, half amplitude 6ms, 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011

RoHS

RoHS Compliant



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.