qrhpt4-70na.jpg View Larger Image (in new window)

Videolarm : QRHPT4-70NA

By: Videolarm
Sensor & Surveillance Systems
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
7" Outdoor Vandal-Resistant dome Camera System w/wall mount, rugged cast aluminum top

The Videolarm QRHPT4-70NA QView Vandal-resistant Rugged Dome includes 2 Hi-res day/night cameras (IR-corrected) with 4-9mm varifocal auto-iris lens and 1/4" interline transfer CCD sensor that delivers clear images at a horizontal resolution up to 480 TVL. It offers a minimum illumination of 0.21 lux.

With a pendant mount, the dome camera can be mounted on segmented, adjustable arms that prevent movements once attached, offering a wide range of viewing angle. The multiple camera system is housed in a vandal-resistant tinted dome made of rugged cast aluminum top and polycarbonate and includes 3 captive fasteners and a sealing O-ring.


Available Configurations Include:

QRHPT4-70NA-X2 7” Outdoor Vandal-Resistant dome Camera System w/wall mount, rugged cast aluminum top and polycarbonate tinted dome, 4 Hi-Res Day/Night Cameras each with a  3-9mm auto-iris, varifocal lens, plus heater/blower, UTP

QRHPT4-70NA features include:

  • Multiple cameras in a single dome take up less geography than multiple cameras in multiple locations
  • One housing to install (rather than three or four) saves money on the initial installation and any future service calls
  • Fixed cameras require little servicing and use the least amount of hard drive space
  • With multiple fixed cameras you can capture continuous footage versus monitoring one direction at a time with a single PTZ camera
  • Available with 2 or 4 day/night (D&N) cameras with IR corrective lens
  • Includes 3.3-12mm auto-iris lens, 7-50mm auto-iris lens for QSD models
  • One 24VAC power input; separate video outputs
  • Available with NVT (Network Video Technologies’) twisted pair video outputs
  • Factory installed system, ready to plug n’ play
  • Includes 5-year warranty
Signal System NTSC
Image Sensor 1/4" Interline Transfer CCD
Scanning 2:1 Interlaced
Sync Internal
Resolution 480
Signal to Noise Ratio More than 50dB
Minimum Illumination 0.21 lux
Lens Focal Length: 4-9 mm
Video Output 1Vp-p 75 ohm (BNC)
Video Enhancement Electronic Iris: ON/OFF selectable dip switch

Auto Iris Control: DC Drive Iris Control w/ adjustable level

White Balance: Auto Tracking White Balance

Flickerless: ON/OFF selectable dip switch

Backlight Compensation: ON/OFF selectable dip switch
Construction Top: Cast aluminum

Dome: OptiClear polycarbonate

Wall Bracket: Cast aluminum
Environment Operating Temperature: -40 ~ 122°F (-40 ~ 50°C)

Heater activates at: 60°F (15°C)

Heater deactivates at: 80°F (27°C)

Operating Temperature with Cold Weather Kit: -50°F (-45°C)
Power Requirements 24VAC
Power Consumption 75VA (watts)
Dimensions 13.4 x 9.7 x 14.7" (340 x 247 x 373mm)
Weight 12 lbs (5.5kg)

facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.