Search
By: Lectrosonics
http://www.avsupply.com/images/logos/lectrosonics-logo.gif
Wireless Microphones & Audio Processors
Contact us for lowest price (800) 284-2288, (858) 565-1101, sales@avsupply.com, or fax (858) 300-4193
Dante 2 In/2 Out Interface

The Lectrosonics DNT22 I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante™ audio to an existing Dante-based networked audio system. The DNT22’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

DNT22 features include:

  • Small form factor, can be unobtrusively located near analog sources or sinks
  • Dual power (DC or PoE) means the DIO2x2 will work in systems with either standard or PoE Ethernet switches
  • Three input gains accommodate common line levels, phantom power and dynamic mics
  • +24V Phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems
  • Two analog output gains to accommodate both consumer and pro line level requirements without overload
Analog Input Balanced and RF filtered 3-pin depluggable microphone/line
Input Impedance >1.8 kΩ @ any gain setting
Maximum Input Level +8 dBu @ 0.0 dB gain
-16 dBu @ +25 dB gain
-31 dBu @ +40 dB gain
Input Gain 0, +25, +40 dB, software selectable
Analog Output Balanced line level with automatic muting on loss of Dante signal
Output Impedance 200 Ω balanced, 100 Ω unbalanced
Output Gain 0.0 or +10 dB, software selectable
Maximum Output Level +12 dBu
Noise EIN: 115 dBu @ +40 dB gain
Output: <90 dBu @ 0.0 dB gain
THD <0.01% @ any gain, input signal 3 dB below maximum
Phantom Power +24V, software selectable
Network Connection Dante/PoE: 100 Base-T Dante Ethernet
Compliance PoE Class 0 802.3af PoE PD compliant
Certification FCC Part 15 Class A, CE
Environmental 32 to 104°F (0 to 40°C)
Power Requirements +12 VDC, 500 mA
DC power not required if used with a PoE Ethernet switch
Dimensions (WxDxH) 6.5 x 3.5 x 1.1" (165 x 89 x 28 mm)


facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.