Search
By: Crestron
http://www.avsupply.com/images/logos/crestron-logo.jpg
The World's Leader for Advanced Home, Campus & Building Control Automation Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101, sales@avsupply.com, or fax (858) 300-4193
FlipTop Touch Screen Control System

The FT-TSC600 FlipTop™ Touch Screen Control System by Crestron® provides a configurable control and connectivity solution in a stylish, flush mount tabletop design. Its built-in 3-Series® control processor and brilliant 5” color touch screen combine to deliver a complete, space-saving controller for any small conference room or similar space. The built-in connection compartment keeps interface cables and connectors at the ready for plugging in laptop computers, mobile devices, AV sources, and other equipment.

 

Available Configurations Include:

FT-TSC600-B FlipTop™ Touch Screen Control System, Black Anodized
FT-TSC600-BALUM FlipTop™ Touch Screen Control System, Brushed Aluminum

FT-TSC600 features include:

  • Flush mount tabletop control and connectivity in one stylish FlipTop™ design
  • Built-in 3-Series® control processor
  • Onboard 10/100 Ethernet and Cresnet® master ports [3]
  • Control port expansion via C2N-IO modules [2]
  • Integrated 5" capacitive color touch screen with Smart Graphics™ support [6]
  • High-performance H.264 streaming video over Ethernet
  • Seamless integration with Crestron® DigitalMedia™
  • 5 soft-touch capacitive buttons for common functions
  • Hands-free audio conferencing using Rava® SIP Intercom Technology [1]
  • Customizable audio feedback
  • Built-in microphone and speaker
  • Balanced line output for amplification of the speaker signal
  • PoE+ network powered
  • Configurable connection compartment allows versatile combinations of pullout cables, cable retractors, connector plates, and AC power outlets [2]
  • Tapered cable notch allows lid to be closed with cables plugged in
  • Lacing bar for under table cable management
  • Universal cutout size fits all new and future FlipTops™
  • Black anodized or brushed aluminum finish
Touch Screen Display
  Display Type TFT active matrix color LCD
  Size 5 inch (127 mm) diagonal
  Aspect Ratio 15:9 WVGA
  Resolution 800 x 480 pixels
  Brightness 300 nits (cd/m2)
  Contrast 450:1
  Color Depth 24-bit, 16.7M colors
  Illumination Edgelit LED
  Viewing Angle ±69° horizontal, +62°/-64° vertical
  Touch Screen Projected capacitive
Buttons
  Hardkeys (5) Projected capacitive pushbuttons, programmable, pre-labeled with icons for "Power", "Home", "Lights", "Up", and "Down"
Memory
  DDR3 SDRAM 1 GB
  Flash 4 GB
  Maximum Project Size 512 MB
Control Engine
  3-Series®; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs
Graphics Engine
  Supports Smart Graphics™ [6]
Communications
  Ethernet 10/100 Mbps; auto-switching; auto-negotiating; auto-discovery; full/half duplex; industry-standard TCP/IP stack; UDP/IP; CIP; DHCP; SSL; IEEE 802.1X; SNMP; BACnet™/IP[5]; IPv4 or IPv6; Active Directory authentication; IIS v.6.0 Web Server; SMTP e-mail client; installer setup via Crestron Toolbox™ or MSIE[7], IEEE 802.3at Type 2 compliant
  Cresnet® Cresnet master mode
  USB Supports computer console
Video
  Streaming Formats H.264 (MPEG-4 part 10 AVC), MJPEG
Audio
  Features Built-in microphone and speaker, Rava® SIP Intercom, line out (same signal as speaker)
  Audio Feedback Formats MP3
Connectors – Connection Compartment
  Cable Pass-Thru Plates Supports up to two cable pass-thru plates (included). Each plate includes four grommeted holes which may be selectively covered using blank caps provided. The cable pass-thru plates are positioned at the left and right sides of the connection compartment.
  Cable Retractors Up to three CBLR2 Cable Retractors[2] can be installed in place of each pass-thru plate, allowing for a total of six cable retractors.
  Connector Plates Supports up to four FTA-CP Connector Plates[2]. Four blank plates are included. The connector plates are positioned at the center of the connection compartment.
  AC Power Outlet Modules A single FTA-PWR-102 Dual AC Power Outlet Module[2] can be installed in place of any two adjacent connector plates, or two FTA-PWR-102 modules can be installed in place of all four connector plates. A single FTA-PWR-200 series International AC Power Outlet Module[2] can be installed in place of any three contiguous connector plates.
Connectors – Bottom Panel
  AUD OUT (1) 3-pin 3.5mm detachable terminal block;
Balanced mono line-level audio output;
Output Impedance: 100 Ohms;
Maximum Output Level: 4 Vrms
  COMPUTER (1) USB Type B female;
USB computer console port (6 ft cable included)
  NET (1) 4-pin 3.5mm detachable terminal block;
Cresnet master port, connects to C2N-IO Control Port Expansion Modules and other Cresnet devices[2,3]
  LAN PoE (1) 8-wire RJ45, female;
10Base-T/100Base-TX Ethernet port, Power over Ethernet compliant[3]
  G (1) 6-32 screw, chassis ground lug
Controls & Indicators
  MSG (1) Red LED, indicates processor has generated an error message
  NET (1) Amber LED, indicates communication with the Cresnet system
  PWR (1) Dual-color LED, indicates operating power supplied via PoE, turns yellow while booting and green when operating
  HW-R (1) Recessed miniature pushbutton for hardware reset
  SW-R (1) Recessed miniature pushbutton for software reset
  LAN PoE (2) LEDs, indicate Ethernet port status
Power Requirements
  Power over Ethernet IEEE 802.3at Type 2 PoE+ Powered Device;
  - 15 Watts if using an 802.3at Type 2 PSE with LLDP advanced power management;
  - Class 4 (25.5W) if using an 802.3at Type 2 PSE without LLDP;
  - Class 0 (12.95W) if using an 802.3af (or 802.3at Type 1) PSE (no Cresnet power available via NET port)[3]
  Available Cresnet Power 5 Watts (208 mA @ 24 Volts DC)[3]
  Utility Power Dependent upon the AC power outlet module installed; refer to the FTA-PWR spec sheet for more information[2]
Environmental
  Temperature 32° to 112°F (0° to 45°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 51 BTU/Hr
Enclosure
  Chassis Metal, black
  Cover Aluminum, black anodized or brushed aluminum finish
  Touch Screen Bezel Aluminum
  Mounting Flush tabletop mount, 1-3/4 in (44 mm) maximum surface thickness, 6-1/4 in (159 mm) deep x 7-1/2 in (190 mm) wide cutout (template provided)
Dimensions
  Height 8.59 in (218 mm);
12.34 in (314 mm) with lid open
  Width 7.98 in (203 mm);
9.19 in (234 mm) with mounting brackets
  Depth 6.77 in (172 mm);
7.88 in (200 mm) with lid open
Weight
  5.2 lb (2.4 kg)


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.