kp-fm400wcl.jpg View Larger Image (in new window)

Hitachi : KP-FM400WCL

By: Hitachi
Industrial Video System & Broadcast
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
Mini Camera Link 1CCD Black & White Camera

The Hitachi KP-FM400WCL can be used for high-precision and high-speed image processing in many applications.  The power supply through the camera link cable is possible from the PoCL frame grabber board. Because the power supply from the DCIN/SYNC connector is also possible, it is possible to make the camera work by using usual frame grabber board. The power supply from the DCIN/SYNC connector is given to priority when the power supply is supplied from both.

Raw Data Output

The FR series of cameras use a CCD with an RGB primary color mosaic filter, outputting the image data in a RAW format with minimal processing in order to achieve higher frame rates as compared to a normal color camera.
External image processing and software is required to produce a proper color picture.

Frame Shutter

Higher resolution in the vertical directional is ensured for moving object.

Multi-step Shutter

A multi-step electric shutter along with a variable speed electric shutter is standard with a minimum shutter speed of 1/50,000 second.

Frame on Demand

A one trigger and fixed shutter mode of frame-on-demand are provided allowing precise timing and exposure for image capture.

Remote Control

Through the Camera Link interface, various setting such as shutter, mode, gain, partial scan, bit depth, etc can be adjusted.

Partial Scan

The start position and height of the image can be adjusted. Higher frame rates are possible by using partial scan mode.

Selectable bit depth of 8 bit or 10 bit

Imaging device 1-inch global shutter CMOS (CMV4000)
  Effective pixels 2048 (H) x 2048 (V)
  Pixel size 5.5 μm (H) x 5.5 μm (V) (square lattice)
  Color filter -
Sensing area 11.264 mm (H) x 11.264 mm (V)
Scanning system Progressive
Aspect ratio  
Frame rate 150 frames per second (full pixel readout)
Pixel frequency 40.0000 MHz
Horizontal scanning frequency Full configuration: 310.078 kHz (80MHz) , 155.039 kHz (40MHz)
Medium configuration : 155.039 kHz (80MHz), 77.519 kHz (40MHz)
Base configuration: 77.519 kHz (80MHz), 38.759 kHz (40MHz)
Vertical scanning frequency Full configuration: 150.523 Hz (80MHz), 75.445 Hz (40MHz)
Medium configuration: 75.445 Hz (80MHz), 37.768 Hz (40MHz)
Base configuration: 37.768 Hz (80MHz), 18.896 Hz (40MHz)
Sync system Internal
Lens mount C mount (Flange focal distance = 17.526 mm)
Video output Digital output (Camera Link)
Base configuration 2TAP (80MHz or 40MHz)
Medium configuration 4TAP (80MHz or 40MHz)
Full configuration 8TAP (80MHz or 40MHz)
Output image size: 2048(H) x 2048(V) (full pixel readout)
Resolution Horizontal/Vertical: 1400TV lines
Sensitivity 400 lx, F8, 3200K
Signal noise to ratio 48dB
Electric shutter OFF, 1/38, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/10000, 1/50000 second
OFF is normal exposure (frame rate)
or changeable by variable shutter (16.125 μs to 211367 μs)
Gamma γ = 1
Frame on demand Mode (A) Fixed shutter mode (8 steps or variable), (B) ONE trigger mode, (C) Burst trigger mode
Trigger input Camera Link (CC1) or DCIN/SYNC connector
Partial scan Selectable start position and height of picture grabbing in 1H step.
Power supply voltage 12 ± 1 VDC
Current consumption Approx. 230 mA (Approx. 2.76 W)
Ambient temperature Performance 0 to +40 °C (+32 to +104 °F), less than 90 % RH
Operation 10 to +50 °C (+14 to 122 °F), less than 90 % RH
Storage -20 to +60 °C (-4 to 140 °F), less than 70 % RH (without dew condensation)
Vibration endurance 10 to 200 Hz 98 m/s2
Shock endurance 490 m/s2
External dimensions 44 (W) x 44 (H) x 41 (D) mm(Not including mount protrusions)
Mass Approx. 130 g

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.