Telecentric CORE optical bench, magnification 0.184x

Indicates the dimensions and shape of image, where "Ø =" stands for diameter and "x=" indicates the nominal image height and length (Tech Info for related drawing). Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf/N): the real f-number of a lens in operating conditions. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm. Object side, calculated with the Rayleigh criterion with λ= 520 nm At max forward current. Tolerance is ± 0.06V on forward voltage measurements. Used in continuous (not pulsed) mode. At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info). Maximum width dimension considering illuminator/telecentric side and cable connector end

Main optical specifications
Magnification	(x)	0.184
Image shape dimension (1)	(Ø, x=mm)	Ø=11.0, x=9.6
Max sensor size		2/3″

Object field of view
1/3”	(mm × mm)	26.09 x 19.57
1/2.5”	(mm × mm)	30.98 x 23.26
1/2”	(mm × mm)	34.78 x 26.09
1/1.8”	(mm × mm)	38.75 x 28.97
2/3”	(mm × mm)	46.20 x 38.53

Advanced optical specifications
Working distance (2)	(mm)	132.9
Working ƒ/N (3)		8
Telecentricity typical (max) (4)	(deg)	< 0.08 (0.10)
Distortion typical (max) (5)	(%)	< 0.05 (0.10)
Depth of field (6)	(mm)	12.20
Resolution (7)	(μm)	28

Electrical specifications
Light color, peak wavelength		green, 520 nm
Supply voltage	(V)	12-24
Max power consumption	(W)	2.5
LED voltage (8)	(V)	3.3 (4.0)
LED current (9)	(mA)	350
Max pulse current (10)	(mA)	2000

Mechanical specifications
Mount		C
Phase adjustment		Yes
Length	(mm)	352
Width (11)	(mm)	157
Height	(mm)	118
Mass	(g)	4056

Environmental specifications
Operating temperature	(°C)	0-40
Storage temperature	(°C)	0-50
Operating relative humidity	(%)	20-85, non condensing
Installation		Indoor use only

Eye safety
Risk group according to CEI EN 62471:2010		Exempt