Call Now: 1-800-284-2288 |
 Opto Engineering: el5mp0856 |
5 MP fixed focal lens with liquid lens technology, focal length 8 mm, ƒ/N 5.6, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Ty... |
 Opto Engineering: el5mp1256 |
5 MP fixed focal lens with liquid lens technology, focal length 12 mm, ƒ/N 5.6, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Ty... |
 Opto Engineering: el5mp1656 |
5 MP fixed focal lens with liquid lens technology, focal length 16 mm, ƒ/N 5.6, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Ty... |
 Opto Engineering: el5mp2556 |
5 MP fixed focal lens with liquid lens technology, focal length 25 mm, ƒ/N 5.6, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Ty... |
 Opto Engineering: en8mpl0818 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 8 mm, f/N 1.8 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: en8mpl1220 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 12 mm, f/N 2.0 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: en8mpl1620 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 16 mm, f/N 2.0 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: en8mpl2518 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 25 mm, f/N 1.8 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: en8mpl3520 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 35 mm, f/N 2.0 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: en8mpl5020 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 50 mm, f/N 2.0 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: mc010x |
Macro lens for 2/3″ sensors, magnification 0.100x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc020x |
Macro lens for 2/3″ sensors, magnification 0.200x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc033x |
Macro lens for 2/3″ sensors, magnification 0.333x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc040x |
Macro lens for 2/3″ sensors, magnification 0.400x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc050x |
Macro lens for 2/3″ sensors, magnification 0.500x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc075x |
Macro lens for 2/3″ sensors, magnification 0.750x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc100x |
Macro lens for 2/3″ sensors, magnification 1.000x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k008x-i |
Macro lens for 12k line scan cameras, magnification 0.08x, mount M58x0.75 FD 11.48
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k008x-k |
Macro lens for 12k line scan cameras, magnification 0.08x, mount M58x0.75 FD 12.96
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k008x-r |
Macro lens for 12k line scan cameras, magnification 0.08x, mount M72x0.75 FD 6.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k012x-i |
Macro lens for 12k line scan cameras, magnification 0.13x, mount M58x0.75 FD 11.48
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k012x-k |
Macro lens for 12k line scan cameras, magnification 0.13x, mount M58x0.75 FD 12.96
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k012x-r |
Macro lens for 12k line scan cameras, magnification 0.13x, mount M72x0.75 FD 6.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k025x-f |
Macro lens for 12k line scan cameras, magnification 0.25x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k025x-i |
Macro lens for 12k line scan cameras, magnification 0.25x, mount M58x0.75 FD 11.48
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k025x-k |
Macro lens for 12k line scan cameras, magnification 0.25x, mount M58x0.75 FD 12.96
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k025x-r |
Macro lens for 12k line scan cameras, magnification 0.25x, mount M72x0.75 FD 6.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k050x-f |
Macro lens for 12k line scan cameras, magnification 0.50x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k050x-i |
Macro lens for 12k line scan cameras, magnification 0.50x, mount M58x0.75 FD 11.48
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k050x-k |
Macro lens for 12k line scan cameras, magnification 0.50x, mount M58x0.75 FD 12.96
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k050x-r |
Macro lens for 12k line scan cameras, magnification 0.50x, mount M72x0.75 FD 6.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k067x-f |
Macro lens for 12k line scan cameras, magnification 0.67x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k067x-i |
Macro lens for 12k line scan cameras, magnification 0.67x, mount M58x0.75 FD 11.48
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k067x-k |
Macro lens for 12k line scan cameras, magnification 0.67x, mount M58x0.75 FD 12.96
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k067x-r |
Macro lens for 12k line scan cameras, magnification 0.67x, mount M72x0.75 FD 6.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k100x-f |
Macro lens for 12k line scan cameras, magnification 1.00x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k100x-i |
Macro lens for 12k line scan cameras, magnification 1.00x, mount M58x0.75 FD 11.48
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k100x-k |
Macro lens for 12k line scan cameras, magnification 1.00x, mount M58x0.75 FD 12.96
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k100x-r |
Macro lens for 12k line scan cameras, magnification 1.00x, mount M72x0.75 FD 6.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k150x-f |
Macro lens for 12k line scan cameras, magnification 1.50x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k150x-i |
Macro lens for 12k line scan cameras, magnification 1.50x, mount M58x0.75 FD 11.48
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k150x-k |
Macro lens for 12k line scan cameras, magnification 1.50x, mount M58x0.75 FD 12.96
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k150x-r |
Macro lens for 12k line scan cameras, magnification 1.50x, mount M72x0.75 FD 6.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k200x-f |
Macro lens for 12k line scan cameras, magnification 2.00x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k200x-i |
Macro lens for 12k line scan cameras, magnification 2.00x, mount M58x0.75 FD 11.48
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k200x-k |
Macro lens for 12k line scan cameras, magnification 2.00x, mount M58x0.75 FD 12.96
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc12k200x-r |
Macro lens for 12k line scan cameras, magnification 2.00x, mount M72x0.75 FD 6.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc150x |
Macro lens for 2/3″ sensors, magnification 1.500x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc200x |
Macro lens for 2/3″ sensors, magnification 2.000x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc3-03x |
Variable macro lens, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc300x |
Macro lens for 2/3″ sensors, magnification 3.000x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc400x |
Macro lens for 2/3″ sensors, magnification 4.000x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k025x-f |
Macro lens for 4k line scan cameras, magnification 0.250x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k025x-j |
Macro lens for 4k line scan cameras, magnification 0.250x, mount M42x1 FD 12
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k025x-n |
Macro lens for 4k line scan cameras, magnification 0.250x, mount M42x1 FD 10.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k050x-f |
Macro lens for 4k line scan cameras, magnification 0.500x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k050x-j |
Macro lens for 4k line scan cameras, magnification 0.500x, mount M42x1 FD 12
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k050x-n |
Macro lens for 4k line scan cameras, magnification 0.500x, mount M42x1 FD 10.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k075x-f |
Macro lens for 4k line scan cameras, magnification 0.750x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k075x-j |
Macro lens for 4k line scan cameras, magnification 0.750x, mount M42x1 FD 12
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k075x-n |
Macro lens for 4k line scan cameras, magnification 0.750x, mount M42x1 FD 10.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k100x-f |
Macro lens for 4k line scan cameras, magnification 1.000x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k100x-j |
Macro lens for 4k line scan cameras, magnification 1.000x, mount M42x1 FD 12
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k100x-n |
Macro lens for 4k line scan cameras, magnification 1.000x, mount M42x1 FD 10.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k125x-f |
Macro lens for 4k line scan cameras, magnification 1.250x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k125x-j |
Macro lens for 4k line scan cameras, magnification 1.250x, mount M42x1 FD 12
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k125x-n |
Macro lens for 4k line scan cameras, magnification 1.250x, mount M42x1 FD 10.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k150x-f |
Macro lens for 4k line scan cameras, magnification 1.500x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k150x-j |
Macro lens for 4k line scan cameras, magnification 1.500x, mount M42x1 FD 12
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k150x-n |
Macro lens for 4k line scan cameras, magnification 1.500x, mount M42x1 FD 10.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k175x-f |
Macro lens for 4k line scan cameras, magnification 1.750x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k175x-j |
Macro lens for 4k line scan cameras, magnification 1.750x, mount M42x1 FD 12
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k175x-n |
Macro lens for 4k line scan cameras, magnification 1.750x, mount M42x1 FD 10.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k200x-f |
Macro lens for 4k line scan cameras, magnification 2.000x, mount F
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k200x-j |
Macro lens for 4k line scan cameras, magnification 2.000x, mount M42x1 FD 12
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc4k200x-n |
Macro lens for 4k line scan cameras, magnification 2.000x, mount M42x1 FD 10.56
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc500x |
Macro lens for 2/3″ sensors, magnification 5.000x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: mc600x |
Macro lens for 2/3″ sensors, magnification 6.000x, C-mount
Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf... |
 Opto Engineering: rt-a-1224mx5m |
5 Megapixel lens for 4/3" sensors, focal length 12 mm, f/N 2.4 - 32, C-mount
Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion graphs see datasheet Measured from the fro... |
 Opto Engineering: rt-a-1620mx5m |
5 Megapixel lens for 4/3" sensors, focal length 16 mm, f/N 2.0 - 32, C-mount
Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion graphs see datasheet Measured from the fro... |
 Opto Engineering: rt-a-2428mf |
5 Megapixel lens for 35 mm Full Frame sensors, focal length 25 mm, f/N 2.8 - 22, F mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-a-2428mt |
5 Megapixel lens for 35 mm Full Frame sensors, focal length 25 mm, f/N 2.8 - 22, M42x1 FD 46.5 mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-a-2520mx5m |
5 Megapixel lens for 4/3" sensors, focal length 25 mm, f/N 2.0 - 32, C-mount
Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion graphs see datasheet Measured from the fro... |
 Opto Engineering: rt-a-2828mf |
5 Megapixel lens for 35 mm Full Frame sensors, focal length 28 mm, f/N 2.8 - 22, F mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-a-2828mt |
5 Megapixel lens for 35 mm Full Frame sensors, focal length 28 mm, f/N 2.8 - 22, M42x1 FD 46.5 mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-a-3520mx5m |
5 Megapixel lens for 4/3" sensors, focal length 35 mm, f/N 2.0 - 32, C-mount
Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion graphs see datasheet Measured from the fro... |
 Opto Engineering: rt-a-3525mf |
5 Megapixel lens for 35 mm Full Frame sensors, focal length 35 mm, f/N 2.5 - 16, F mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-a-3525mt |
5 Megapixel lens for 35 mm Full Frame sensors, focal length 35 mm, f/N 2.5 - 16, M42x1 FD 46.5 mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-a-5018mf |
5 Megapixel lens for 35 mm Full Frame sensors, focal length 50 mm, f/N 1.8 - 22, F mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-a-5018mt |
5 Megapixel lens for 35 mm Full Frame sensors, focal length 50 mm, f/N 1.8 - 22, M42x1 FD 46.5 mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-fl-bc2518-9m |
9 Megapixel lens for 1" sensors, focal length 25 mm, f/N 1.8 - 16, C-mount
Working distance: distance between the front end of the mechanics and the object. Measured from the front end of the mechanics to the camera flange at infinite focusing. |
 Opto Engineering: rt-fl-bc3518-9m |
9 Megapixel lens for 1" sensors, focal length 35 mm, f/N 1.8 - 22, C-mount
Working distance: distance between the front end of the mechanics and the object. Measured from the front end of the mechanics to the camera flange at infinite focusing. |
 Opto Engineering: rt-fl-bc5024-9m |
9 Megapixel lens for 1" sensors, focal length 50 mm, f/N 2.4 - 22, C-mount
Working distance: distance between the front end of the mechanics and the object. Measured from the front end of the mechanics to the camera flange at infinite focusing. |
 Opto Engineering: rt-fl-bc7528-9m |
9 Megapixel lens for 1" sensors, focal length 75 mm, f/N 2.8 - 32, C-mount
Working distance: distance between the front end of the mechanics and the object. Measured from the front end of the mechanics to the camera flange at infinite focusing. |
 Opto Engineering: rt-fl-yfl3528 |
5 Megapixel lens for 35 mm Full Frame sensors, focal length 35 mm, f/N 2.8 - 22, F mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-fl-yfl5028 |
5 Megapixel lens for 35 mm Full Frame sensors, focal length 50 mm, f/N 2.8 - 22, F mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-m0528-mpw3 |
6 Megapixel lens, focal length 5 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-m0828-mpw3 |
6 Megapixel lens, focal length 8 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-m1228-mpw3 |
6 Megapixel lens, focal length 12 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-m1628-mpw3 |
6 Megapixel lens, focal length 16 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-m2528-mpw3 |
6 Megapixel lens, focal length 25 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-m3528-mpw3 |
6 Megapixel lens, focal length 35 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-m3z1228c-mp |
Varifocal lens, focal length 12-36 mm, f/N 2.8-16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-m5028-mpw3 |
6 Megapixel lens, focal length 50 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-m7528-mpw3 |
6 Megapixel lens, focal length 75 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-mlh-10x-c |
10X Macro zoom, f# 5.6-32, C-mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-mlm-3xmp |
Macro zoom, magnification 3.3x, f# 4.5-22, C-mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-tec-m55 |
Partially telecentric lens, focal length 55 mm, f# 2.8-32, C-mount
Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image. Measured from the front end of the mechan... |
 Opto Engineering: rt-v0828-mpy2 |
12 Megapixel lens for 1.1" sensors, focal length 8 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-v1228-mpy2 |
12 Megapixel lens for 1.1" sensors, focal length 12 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-v1628-mpy2 |
12 Megapixel lens for 1.1" sensors, focal length 16 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-v2528-mpy |
12 Megapixel lens for 1.1" sensors, focal length 25 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-v3528-mpy |
12 Megapixel lens for 1.1" sensors, focal length 35 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |
 Opto Engineering: rt-v5028-mpy |
12 Megapixel lens for 1.1" sensors, focal length 50 mm, f/N 2.8 - 16, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion gra... |