Contact us for lowest price (800) 284-2288, (858) 565-1101, firstname.lastname@example.org
, or fax (858) 300-4193
IP & PoE Over Coax Extender - Weatherproof Transmitter
The Nitek IP & PoE Over Coax Extender Weatherproof Transmitter Unit ET 1500CW Outdoor Rated IP Cameras over Coaxial Cable network extender and PoE Injector is a transmitter that extends Ethernet and PoE for distances up to 500 meters (1,640 ft.) over coaxial cable. Operates only with ER8500C or ER16500C Receivers.
The ET-1500CW IP video over Coax Outdoor Transmitter is a network extender-PoE Inserter (EtherStretch) component. The ET1500CW includes a NEMA4X rated enclosure to house the transmitter. The weatherproof transmitter enclosure makes it possible to take the network outdoors to devices located in hostile environments.The ET1500CW operates with either an ER8500C or ER16500C 8 or 16 Port IP Extender/Gigabit PoE Switch Receiver Unit, to form a multi-channel IP extender "over-coax" system. The System transmits IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication & PoE path. When operating over RG59U coaxial cable, the coax network extender system can operate for distances of up to 500 meters (1,640 feet). ET1500CW Transmitter is part of a system that operates in conjunction with either a ER8500C Eight Port Receiver or ER16500C Sixteen Port Receiver (these receivers are sold separately).The ET1500CW coax ethernet extender requires very little installation time & absolutely no set up or configuration. The The ET1500CW ethernet over coax network extender transmitter is transparent to the network and has no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.
→ NEMA4X rated enclosure to house transmitter
→ Transmits up to distances of 500 meters / 1,640 feet
→ Supports PoE and network communications
→ Supports any network device, including IP cameras
→ Fully transparent to the network
→ Built-in surge protection
→ Easy to install, no set up required
→ No MAC or IP addressing required
→ LED indicators for network signals, link status and power
→ Optional power supply can insert POE power for non-POE switches
| Size|| 1.1"H x 1.6"W x 4.93"D |
| Power Requirements|| PoE or PS48 Power Supply (48vdc @ 15.4watts) |
| Ethernet Connection||  Auto Configuring 10 / 100 RJ45 port |
| EtherStretch Link Connection||  Coaxial BNC Connector |
| LED Indicators|| Link Status, Power, PoE Out, 10Mb or 100mb |
| Shipping Weight|| 3 lbs. |
| Mounting|| Two 3/8" mounting slots |
| Operating Temperature|| 0 - 140 degrees Fahrenheit |
| Humidity|| Up to 85% non-condensing |
© 1996 - 2017 | All Rights Reserved
Audio Video Supply Inc.
4575 Ruffner St
San Diego, CA 92111
Prices and specifications subject to change without notice.