Search
http://www.avsupply.com/images/logos/nitek-logo.gif

Nitek

Nitek utps, video baluns, twisted pairs, hubs
Video Transmission Solutions

Categories:

Showing All 181 Products...
vb31pt.jpg
Nitek: vb31pt

Video Balun Transceiver for UTP Category Cables

The Nitek Video Balun Transceiver for Twisted Pair VB31PT video balun transceiver is a video transmission device that provides a low cost means of sending live video over...

Transceiver Unit Size    0.9” H x 1.0” W x 1.75” D (not including coax)
Transceiver Unit Input    1 Vpp composite video Monochrome or Color
Transceiver Unit Output    Balanced low voltage current loop
System    (2 transceivers required)
System Video Format    PAL, SECAM, NTSC, RS170, CCIR (Color or B/W)
vb43atf.jpg
Nitek: vb43atf

Video Balun Combiners For Twisted Pair Up To 750 Feet

The Niket Video Balun Combiner for Twisted Pair VB43ATF is a unique transmission device which provides an economical means of sending video, camera power and 2-wire control...

Combiner Unit Size    .875” H x 1.875” W x 1.25” D
Combiner Unit Power Pass Through    250mA @ 1,000 feet on 24 AWG wire 1 Amp @ 100 feet on 24 AWG wire
Combiner Unit Input    1 Vpp composite video Monochrome or Color
Combiner Unit Output    Balanced low voltage current loop
Combiner Unit Modular Jack    Standard RJ45
pvx44.jpg
Nitek: pvx44

4 Port Video, Power And Data Distribution Unit

The Nitek 4 Port Video, Power and Data Distribution PVX44 unit. Systems operate with other Nitek UTP video equipment including video hubs, standard video balun transceivers,...

Camera Port    RJ45 Connector
Data Port    RJ45 Connector
Video Port    RJ45 Connector
Power    Screw Terminals for 16-24 AWG wire
Power Requirements    Class 2 Low Voltage
vh439.jpg
Nitek: vh439

4 Port Video Hub Up To 750 Feet

The Nitek VH439 is a four port video balun hub with built-in surge suppression. The four port video balun hub operates as a transmitter or receiver in an installation requiring...

Size    1.6" (H) x 4.3" (W) x 2.5" (D)
Power Requirements    NONE REQUIRED
Video Input Connection    Standard BNC connector for 1 Vpp composite video Monochrome or Color
Video Format    RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
UTP Connection Type    Screw terminals or RJ45 modular UTP connector providing balanced low voltage current loop
pv824.jpg
Nitek: pv824

8 Port Video, Power And Data Distribution Unit

The Nitek 8 Port Video, Power and Data Distribution Unit PV824 operate with other Nitek UTP video equipment including video hubs, standard video balun transceivers, active...

Camera Port    RJ45 Connector
Data Port    RJ45 Connector
Video Port    RJ45 Connector
Power    Screw Terminals for 16-24 AWG wire
Power Requirements    Class 2 Low Voltage
pvx164.jpg
Nitek: pvx164

16 Port Video, Power And Data Distribution Unit
The Nitek 16 Port Video, Power and Data Distribution PVX 164 unit. Systems operate with other Nitek UTP video equipment including video hubs, standard video balun transceivers,...
Camera Port    RJ45 Connector
Data Port    RJ45 Connector
Video Port    RJ45 Connector
Power    Screw Terminals for 16-24 AWG wire
Power Requirements    Class 2 Low Voltage
vh1651.jpg
Nitek: vh1651

16 Port Active Video Hub Up To 1,500 Feet (450 Meters) W/passive Baluns

The Nitek 16 port active video hubs VH1651 with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other...

Size    1 RU x 6.0" (D)
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
Common Mode Rejection    >70dB
vr448coax.jpg
Nitek: vr448coax

High Speed Ethernet Extender W/ Integrated 4 Port PoE Switch

The Nitek 4 Port PoE Switch with Network Extender VR448COAX is an IP Camera Extender over Coaxial Cable integrates a 4 port PoE network switch with our already popular Ethernet...

Unit    Transceiver
Network Connection    (4) RJ45 Connector
Coaxial Connection    BNC Connector
Power    48 Volt Class 2 Power Supply
Network Rate    10/100 Ethernet
vr448utp.jpg
Nitek: vr448utp

High Speed Ethernet Extender W/ Integrated 4 Port PoE Switch - Up To 1 Mile (1,600 Meters) Over UTP
The Nitek Network Extender with PoE VR148UTP Network Extender-PoE Inserter allows IP Ethernet transmission of network data to communicate over an existing coaxial cable for distances...
Unit    Transceiver
Network Connection    RJ45 Connector
Twisted Pair Connection    RJ11 Connector
Power    24VAC/VDC @ 1amp
Network Rate    10/100 Ethernet
vb31at.jpg
Nitek: vb31at

Video & Power Balun Combiner

The Nitek Video and power balun combiner provides video and camera power over a single CAT5 for CCTV twisted pair video transmission up to 750 feet (225 meters) in conventional UTP analog Video...

Combiner    Unit
Combiner Size (mm)    23 H x 25 W x 51 D
Combiner Power Pass Through    250mA @ 300 meters on 0,5mm, 1 Amp @ 30 meters on 0,5mm
Combiner Video Input    1 Vpp composite video, Monochrome or Color
Combiner Output    Balanced low voltage current loop
vh851.jpg
Nitek: vh851

8 Port Active UTP Video Hub 100 Feet To 1,500

The Nitek 8 port active video hubs VH851 with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other...

Size    1 RU x 6.0"D
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
Common Mode Rejection    >70dB
vb31m.jpg
Nitek: vb31m

Video Balun for UTP

Video balun with pigtail coax and male BNC for operation with other baluns or active receivers.

The VB31M is a UTP video balun transceiver that serves as a UTP video transmission device...

Combiner Unit Size    0.9” H x 1.0” W x 2.0” D
Combiner Unit Power Pass Through    250mA @ 1,000 feet on 24 AWG 1 Amp @ 100 feet on 24 AWG
Combiner Unit Video Input    1 Vpp composite video Monochrome or Color
Combiner Unit Output    Balanced low voltage current loop
Combiner Unit Modular Jack    Standard RJ45
vb37m.jpg
Nitek: vb37m

Video Balun Transceiver For Twisted Pair Up To 750 Feet (225 Meters)

The Video Balun Transceiver for Twisted Pair VB37M video balun transceiver is a video transmission device that provides a low cost means of sending live video over unshielded...

Transceiver Unit Size    1.3” H x 2.0” W x .95” D
Transceiver Unit Input    1 Vpp composite video Monochrome or Color
Transceiver Unit Output    Balanced low voltage current loop
System    (2 transceivers required)
System Video Format    PAL, SECAM, NTSC, RS170, CCIR (Color or B/W)
vb39m.jpg
Nitek: vb39m

Video Balun Transceiver For Twisted Pair

The Nitek Video Balun Transceiver for Twisted Pair VB39M video balun transceiver is a video transmission device that provides a low cost means of sending live video over...

Transceiver Unit Size    1.3” H x 2.0” W x .95” D
Transceiver Unit Input    1 Vpp composite video Monochrome or Color
Transceiver Unit Output    Balanced low voltage current loop
System    (2 transceivers required)
System Video Format    PAL, SECAM, NTSC, RS170, CCIR (Color or B/W)
vb37f.jpg
Nitek: vb37f

Video Balun Transceiver For Twisted Pair Up To 750 Feet

The Niket Video Balun Transceiver for Twisted Pair VB37F video balun transceiver is a video transmission device that provides a low cost means of sending live video over...

Transceiver Unit Size    1.3” H x 2.0”” W x 0.95” D
Transceiver Unit Input    1 Vpp composite video Monochrome or Color
Transceiver Unit Output    Balanced low voltage current loop
System    (2 transceivers required)
System Video Format    PAL, SECAM, NTSC, RS170, CCIR (Color or B/W)
vb39f.jpg
Nitek: vb39f

Video Balun Transceiver For Twisted Pair Up To 750 Feet

The Nitek Video Balun Transceiver for Twisted Pair VB39F video balun transceiver is a video transmission device that provides a low cost means of sending live video over...

Transceiver Unit Size    1.3” H x 2.0” W x .95” D
Transceiver Unit Input    1 Vpp composite video Monochrome or Color
Transceiver Unit Output    Balanced low voltage current loop
System    (2 transceivers required)
System Video Format    PAL, SECAM, NTSC, RS170, CCIR (Color or B/W)
tr515.jpg
Nitek: tr515

Active Video Balun Receiver For UTP Transmission From 100 To 1,500 Feet

The Niket Active Video Receiver for UTP Transmission TR 515 is designed for operation over Category twisted pair cable and requires the use of a transmitter unit. The unit works...

Receiver Unit    Receiver only
Size    1.6” H x 4.3” W x 2.4” D
Power Requirements    12 to 24 VAC or VDC, 45mA
Operating Distance    100 to 1,500 ft
Input    Balanced low voltage current loop
tr560.jpg
Nitek: tr560

Active Video Balun Receiver For UTP Transmission From 100 To 6,000 Feet (30 To 1,800 Meters)

The Niket Receiver for UTP Transmission TR560 is designed for operation over Category twisted pair cable and requires the use of a transmitter unit. The unit works equally well...

Receiver Unit    Receiver only
Size    1.6” H x 4.3” W x 2.4” D
Power Requirements    12 to 24 VAC or VDC, 45mA
Operating Distance w/Passive Transmitter    100 to 3,000 feet
Operating Distance w/Active Transmitter Analog Video    500 to 7,200 feet
tt560.jpg
Nitek: tt560

Active Video Balun Transmitter For UTP Transmission From 500 To 6,000 Feet

The Nitek Active Transmitter Unit for Twisted Pair Video TT560 is designed for operation over Category rated cable or twisted pair communication cable and requires a Nitek active...

Unit    Transmitter
Size    1.6” H x 4.3” W x 2.4” D
Power Requirements    12 to 24 VAC or VDC, 45mA
Operating Distance w/TR560 Receiver Analog Video    500 to 7,200 feet
Operating Distance w/TR560 Receiver with DVR    500 to 6,000 feet
ts510m.jpg
Nitek: ts510m

Active Video And Power Balun Set For Transmission Of Video And Power Up To 1,000 Feet (300 Meters) Over UTP Cable.

The Nitek Complete Active Video System TS510M is a complete video transmission system designed to transmit video and remotely power stationary camera over one Category 3 or better...

Unite    Receiver
Size    1.7” H x 4.3” W x 2.5” D
Power Requirements    Class 2 SELV
Power Out    24-30 VAC 300mA 50/60 Hz
Input   Low voltage differential
ts515.jpg
Nitek: ts515

Live Video Transmission System

The Nitek Live video transmission system TS515 for operation over twisted pair, Cat 5, Cat 6 or Cat 7 cables. The TS515 is a complete Twisted Pair Video system...

Size    1.6" (H) x 4.30” (W) x 2.4" (D)
Power Requirements   24VAC @ 1watt (1VA)
Input    Balanced low voltage current loop
Output    1 vpp composite video Monochrome or Color
Common Mode Rejection    >70dB
ts560.jpg
Nitek: ts560

Active Video Balun Set For Transmission Of CCTV Over Unshielded Twisted Pair (UTP) Transmission From 100 Feet (30 Meters) To 3,000 Feet (1,800 Meters).

The Nitek Live video transmission system TS560 for operation over twisted pair, Cat 2 or better cables. The TS560 is a complete Twisted Pair Video system made up...

Size    1.6” (H) x 4.30” (W) x 2.4” (D)
Power Requirements    24VAC@1watt (1VA)
Input    Balanced low voltage current loop
Output    1 vpp composite video Monochrome or Color
Common Mode Rejection    >70dB
ex560.jpg
Nitek: ex560

Active Video Balun Set For Transmission Of CCTV Over Unshielded Twisted Pair (UTP) Transmission From 500 Feet (150 Meters) To 6,000 Feet (1,800 Meters).

The Nitek Video Transmission System EX560 is a complete twisted pair video system made up of a TR560 receiver unit and a TT560 transmitter unit. The system is designed to operate...

Unit    Receiver
Size    1.6” H x 4.3” W x 2.4” D
Power Requirements    24 VAC @ 1 watt (1VA)
Input    Balanced low voltage current loop
Output    1 Vpp composite video Monochrome or Color
ex1120.jpg
Nitek: ex1120

Active Video Balun Set For Transmission Of CCTV Over Unshielded Twisted Pair (UTP) Transmission From 1,000 Feet (300 Meters) To 12,000 Feet (3,600 Meters).

The Nitek Twisted Pair Video Transmission System EX1120 is a complete twisted pair video system made up of a TR1120 receiver unit and a TT1120 transmitter unit. The system is...

Unit    Transmitter
Size    1.8” H x 4.3” W x 2.4” D
Power Requirements    24 VAC @ 2 watts (2VA)
Input    1 Vpp composite video Monochrome or Color
Output    Balanced low voltage current loop
vh451.jpg
Nitek: vh451

4 Port Active UTP Video Balun Hub

The Nitek VH451 4 port active video mini-hub with gain and loss control, built-in surge suppression, ground loop isolation and video detection. Systems operate with other Nitek...

Unit    Transceiver
Size    5.5" (W) x 1.8" (H) x 4.6" (D)
Power Requirements    24 VAC 300mA max. Class 2 (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
vh456.jpg
Nitek: vh456

4 Port Active UTP Video Mini-Hub

The Nitek VH456 4 port active video mini-hub with gain and loss control, built-in surge suppression, ground loop isolation and video detection. Systems operate with other Nitek...

Size    5.5" (W) x 1.8" (H) x 4.6" (D)
Power Requirements    24 VAC 300mA max. Class 2 (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
Common Mode Rejection    >70dB
vh839.jpg
Nitek: vh839

8 Port UTP Video Hub

The Nitek 8 port video balun hubs VH839 with built-in surge suppression. Systems operate with other Nitek UTP video equipment including, video balun hubs, standard video balun...

Unit    Transceiver
Size    1 RU x 6.0"D
Power Requirements    NONE REQUIRED
Video Input Connection    Standard BNC connector for 1 Vpp composite video monochrome or color
Video Format    RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
vh839m.jpg
Nitek: vh839m

8 Port UTP Video Hub

The Nitek VH839M video balun hubs are multichannel video transmission devices that provide a low cost means of sending quality live video over Category UTP...

Unit    Transceiver
Size    1 RU x 6.0"D
Power Requirements    NONE REQUIRED
Video Input Connection    Standard BNC connector for 1 Vpp composite video monochrome or color
Video Format    RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
vh851m.jpg
Nitek: vh851m

8 Port Active UTP Video Hub 100 Feet To 1,500 Feet, (RJ45 Jacks)

The Nitek 8 port active video hubs VH851M with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other...

Size    1 RU x 6.0"D
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
Common Mode Rejection    >70dB
vh856.jpg
Nitek: vh856

8 Port Active UTP Video Hub 100 Feet To 6,000 Feet

The Nitek 8 or 16 port active video hubs VH856 with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with...

Size    1 RU x 6.0"D
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
Common Mode Rejection    >70dB
vh856m.jpg
Nitek: vh856m

8 Port Active UTP Video Hub 100 Feet To 6,000 Feet (RJ45 Jacks)
The Nitek 8 or 16 port active video hubs VH 856M with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with...
Size    1 RU x 6.0"D
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
Common Mode Rejection    >70dB
vh1639.jpg
Nitek: vh1639

16 Port UTP Video Hub

The Nitek 16 port video balun hub VH1639 with built-in surge suppression. Systems operate with other Nitek UTP video equipment including, single or multi-port video balun hubs,...

Unit    Transceiver
Size    1 RU x 6.0" (D)
Power Requirements    NONE REQUIRED
Video Input Connection    Standard BNC connector for 1 Vpp composite video monochrome or color
Video Format    RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
vh1639m.jpg
Nitek: vh1639m

16 Ports - Up To 750 Feet, (RJ45 Jacks)
The Nitek 16 port video balun hub VH 1639M with built-in surge suppression. Systems operate with other Nitek UTP video equipment including, single or multi-port video balun hubs,...
Unit    Transceiver
Size    1 RU x 6.0" (D)
Power Requirements    NONE REQUIRED
Video Input Connection    Standard BNC connector for 1 Vpp composite video monochrome or color
Video Format    RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
vh1651m.jpg
Nitek: vh1651m

16 Port Active UTP Video Hub Up To 1,500 Feet
The Nitek 16 port active video hubs VH 1651M with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with...
Size    1 RU x 6.0" (D)
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
Common Mode Rejection    >70dB
vh1656.jpg
Nitek: vh1656

16 Port Active UTP Video Hub Up To 3,000 Feet

The Nitek 16 port active video hubs VH1656 with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other...

Size    1 RU x 6.0" (D)
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
Common Mode Rejection    >70dB
vh1656m.jpg
Nitek: vh1656m

16 Port Active UTP Video Hub Up To 3,000 Feet With Passive Baluns
The Nitek 16 port active video hubs VH 1656M with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with...
Size    1 RU x 6.0" (D)
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
Common Mode Rejection    >70dB
vh3251.jpg
Nitek: vh3251

32 Port Active UTP Video Hub 100 Feet To 1,500 Feet

The Nitek 32 port active video hub VH3251 with built-in surge suppression, ground loop isolation, gain and loss control, and video detection. Systems operate with other Nitek UTP...

Unit    Transceiver
Size    1 RU x 9.5" (D)
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
vh3256.jpg
Nitek: vh3256

32 Port Active UTP Video Hub 100 Feet To 6,000 Feet

The Nitek 32 port active video hub VH3256 with built-in surge suppression, ground loop isolation, gain and loss control, and video detection. Systems operate with other Nitek UTP...

Unit    Transceiver
Size    1 RU x 9.5" (D)
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
vh3200.jpg
Nitek: vh3200

32 Port Active Video Hub With Standard Inputs

The Nitek 32 port active video hub VH3200 with built-in surge suppression and video detection. Systems operate with other Nitek UTP video equipment including, Video transceiver...

Unit    Transceiver
Size    1 RU x 6.0" (D)
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
vb41x8.jpg
Nitek: vb41x8

Video Balun Transceiver Card For Twisted Pair Up To 750 Feet (225 Meters)

The Nitek Video Balun Card for Twisted Pair VB41x8 modular card is designed for use with the modular rack system. Each card has 8 video balun units, built-in surge protection and...

Size    1 card slot
Twisted Pair Input    (8) Balenced low voltage current loop
Output    (8) 1vpp composite video monochrome or color
Common Mode Rejection    60dB
Video Format    RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
tr515x8.jpg
Nitek: tr515x8

Active Video Receiver Card Up To 1,500 Feet (450 Meters)

The Nitek Modular Active Video Receiver Card TR515x8 is designed for use with the modular rack system. The system holds modular cards in any combination, using the VH3200 card...

Unit    Transceiver
Size    1 card slot
Power Requirements    Card powered by modular rack
Input    (8) Balenced low voltage current loop
Output    (8) 1vpp composite video monochrome or color
tr560x8.jpg
Nitek: tr560x8

Active Receiver Card Up To 3,000 Feet (900 Meters)

The Nitek Modular Active Video Receiver Card TR560x8 is designed for use with the modular rack system. The system holds modular cards in any combination, using the VH3200 card...

Size    1 card slot
Power Requirements    Card powered by modular rack
Input    (8) Balenced low voltage current loop
Output    (8) 1vpp composite video monochrome or color
Common Mode Rejection    >70dB
rk400.jpg
Nitek: rk400

Modular Card Cage

The Nitek Modular Card Cage for 19 ” Rack Cabinet RK400 holds up to 10 modular cards. A wide variety of modular cards allow the rack system to be customized to the specific...

Size    5.25" (H) x 19.0" (W) x 10.0" (D)
Capacity    10 modular cards (Cards sold separately)
Power Requirements    120VAC @ 1/2 Amp
Shipping Weight    18 lbs
vb41x4.jpg
Nitek: vb41x4

Video Balun Transceiver Card For Twisted Pair Up To 750 Feet (225 Meters)

The Nitek Video Balun Transceiver Card VB41x4 modular card is designed for use with the modular rack system. Each card has 4 video balun units, built-in surge suppression and...

Unit    Transceiver
Size    1 card slot
Twisted pair Input    (4) Balenced low voltage current loop
Output    (4) 1vpp composite video monochrome or color
Common Mode Rejection    60dB
tr515x4.jpg
Nitek: tr515x4

Unshielded Twisted Pair (UTP) Transmission Up To 1,500 Feet (450 Meters)

The Nitek Unshielded Twisted Pair TR515x4 is designed for use with the modular rack system. The system holds up to ten (10) modular cards, in any combination, using the RK400 card...

Unit    Transceiver
Size    1 card slot
Power Requirements    Card powered by modular rack
Input    (4) Balenced low voltage current loop
Output    (4) 1vpp composite video monochrome or color
tr560x4.jpg
Nitek: tr560x4

Unshielded Twisted Pair (UTP) Transmission Up To 3,000 Feet (900 Meters)

The Nitek Unshielded Twisted Pair TR560x4 modular card is designed for use with the modular rack system. The system holds up to ten (10) modular cards, in any combination, using...

Size    1 card slot
Power Requirements    Card powered by modular rack
Input    (4) Balenced low voltage current loop
Output    (4) 1vpp composite video monochrome or color
Common Mode Rejection    >70dB
da422.jpg
Nitek: da422

Modular Data Distribution Amp
The Nitek Modular Data Distribution Amp DA 422 data distribution card is designed for use with the modular rack system for distances up to 6,000 feet (1800 meters).

The...
Unit    Transceiver
Size    1 card slot
Twisted Pair     EIA standard RS422
Output    (4) separate EIA standard RS422 signals
Data Rate    Up to 64K baud
cx452.jpg
Nitek: cx452

Modular Crossover Card Cage For 19" Rack Cabinet

The Nitek Modular Card Cage w/ Fused Power Supply CX452 is a modular crossover interface card cage for the UTPLinks video, data & power over twisted pair transmission system.

Size    1.72" (H) x 19.0" (W) x 6.0" (D) (with mounting ears)
Power Requirements    Supplied by PS115 power supply
Twisted Pair Connection(vertical runs)    5 RJ45 connectors providing balanced low voltage current loop
Temperature Range    0 degrees C to 55 degrees C
Humidity Range    0 to 98%, non-condensing
cxm22.jpg
Nitek: cxm22

4 Channel Crossover, Power Insertion & RS422 Distribution Card

The Nitek 4 Channel Crossover, RS422 Distribution & 24 VAC Power Insertion Module (use with CX452) CXM22 crossover insertion cards are designed for use with the CX254 or CX452...

Unit    Modular Card
Size    1 horizontal card slot (5 slots total CX452 card cage)
Power Requirements    Supplied by PS115 power supply
Twisted Pair Connection (vertical runs)    (5) RJ45 connectors providing balanced low voltage current loop (Provided by CX452 card cage)
Twisted Pair Connection (horizontal runs)    RJ45 connector
chm22.jpg
Nitek: chm22

4 Channel Crossover, Power Insertion & Video Card

The Nitek Crossover, RS422 Dist & 24 VAC Power Insertion Module, w/ 4 Video Transceivers (use with CX452) CHM22 are designed for use with the CX452 modular card cage (sold...

Unit    Transceiver
Size    1 horizontal card slot (5 slots total CX452 card cage)
Power Requirements    Supplied by PS115 power supply
Twisted Pair Connection (vertical runs)    (5) RJ45 connectors providing balanced low voltage current loop (Provided by CX452 card cage)
Twisted Pair Connection (horizontal runs)    RJ45 connector
fan64.jpg
Nitek: fan64

Circulation Fan Module

The Nitek Circulation Fan Module FAN 64 provides cooling for the CX254 and CX452 crossover units. The FAN-64 can be inserted in slot 3 of the CX254 or CX452 and...

Unit    Transceiver
Size    1 horizontal card slot (5 slots total CX452 card cage)
Power Requirements    Supplied byPS115 Power Supply
Shipping Weight    1 lbs
poe48.jpg
Nitek: poe48

Power Over Ethernet Card

The Nitek Power over Ethernet Card POE48 series 4 channel PoE crossover and power insertion card is designed for use with the CX254 and the CX452 modular card cage (purchase...

Size    1 horizontal card slot (5 slots total CX452 card cage)
Power Requirements    Supplied by PS115 power supply
Power Output    48VDC @ 15.4 WATTS/PORT
Twisted Pair Connection (vertical runs)    RJ45 connector
Twisted Pair Connection (horizontal runs)    RJ45 connector
pv424.jpg
Nitek: pv424

4 Port Video, Power And Data Distribution Unit

The Nitek 4 Port Video, Power and Data Distribution Unit PV424 operate with other Nitek UTP video equipment including video hubs, standard video balun transceivers, active...

Camera Port    RJ45 Connector
Data Port    RJ45 Connector
Video Port    RJ45 Connector
Power    Screw Terminals for 16-24 AWG wire
Power Requirements    Class 2 Low Voltage
utpsys16.jpg
Nitek: utpsys16

16 Port Video, Power And Data Distribution Units

The Nitek 16 Port Video, Power and Data Distribution Unit UTPSYS16 operate with other Nitek UTP video transceivers or any twisted pair equipped camera. This simple to install rack...

Size    1.72" (H) x 19.0" (W) x 15.50" (D) (with mounting ears)
Power Requirements    115/230 VAC, IEC with molded power cord (included)
Twisted Pair Connection (vertical runs)    16 RJ45 connectors providing balanced low voltage current loop
Temperature Range    0 degrees C to 55 degrees C
Humidity Range    0 to 98%, non-condensing
ipt148.jpg
Nitek: ipt148

IP Device PoE Tester
The Nitek IP Device PoE Tester IPT 148 can be used to test the installation of PoE equipment with or without a PoE network. The IPT148 allows an installer to connect the IP camera to...
Size    1.72" (H) x 19.0" (W) x 15.50" (D) (with mounting ears)
Power Requirements    115/230 VAC, IEC with molded power cord (included)
Twisted Pair Connection (vertical runs)    16 RJ45 connectors providing balanced low voltage current loop
Temperature Range    0 degrees C to 55 degrees C
Humidity Range    0 to 98%, non-condensing
vr124coax.jpg
Nitek: vr124coax

High Speed Ethernet Extender - Up To 2,500 Feet (750 Meters) Over Coax

The Nitek High Speed Ethernet Extender VR124COAX to send IP Cameras over coax allows IP Ethernet transmission of network data to communicate over an existing coaxial cable for...

Unit    Transceiver
Network Connection    RJ45 Connector
Coaxial Connection    BNC Connector
Power    24VAC/VDC @ 1amp
Network Rate    10/100 Ethernet
vr124utp.jpg
Nitek: vr124utp

High Speed Ethernet Extender - Up To 1 Mile (1,600 Meters) Over UTP
The Nitek Network Extender VR 124UTP allows IP Ethernet transmission of network data to communicate over a single pair of UTP cable for distances up to 1 mile (1,600...
Unit    Transceiver
Network Connection    RJ45 Connector
UTP Connection    RJ11
Power    24VAC/VDC @ 1amp
Network Rate    10/100 Ethernet
vr148coax.jpg
Nitek: vr148coax

High Speed Ethernet Extender W/PoE - Up To 2,500 Feet (750 Meters) Over Coax

The Nitek High Speed Ethernet Extender VR148COAX Network Extender-PoE Inserter allows IP Ethernet transmission of network data to communicate over an existing coaxial cable for...

Unit    Transceiver
Network Connection    RJ45 Connector
Coaxial Connection    BNC Connector
Power    24VAC/VDC @ 1amp
Network Rate    10/100 Ethernet
vr148utp.jpg
Nitek: vr148utp

High Speed Ethernet Extender W/PoE - Up To 1 Mile (1,600 Meters) Over UTP
The Nitek Network Extender VR148 UTP PoE Inserter allows IP Ethernet transmission of network data to communicate over an existing coaxial cable for distances up to 1 mile (1,600...
Unit    Transceiver
Network Connection    RJ45 Connector
UTP Connection    RJ11
Power    24VAC/VDC @ 1amp
Network Rate    10/100 Ethernet
3000-series.jpg
Nitek: 3000-series

Multi-Mode CCTV Transceivers
The 3000 Series fiber optic transmission systems are designed for low cost, single channel, point-to-point video transmission along with associated P/T/Z data and audio or auxiliary communication...
Unit    Transceiver
Network Connection    RJ45 Connector
UTP Connection    RJ11
Power    24VAC/VDC @ 1amp
Network Rate    10/100 Ethernet
5000-series.jpg
Nitek: 5000-series

Multi-Mode CCTV Transceivers
The 5000 Series fiber optic transmission systems are designed for low cost, multi-channel, point-to-point video transmission along with associated Ethernet, P/T/Z data and audio or auxiliary...
Unit    Transceiver
Network Connection    RJ45 Connector
UTP Connection    RJ11
Power    24VAC/VDC @ 1amp
Network Rate    10/100 Ethernet
7000-series.jpg
Nitek: 7000-series

Multi-Mode CCTV Transceivers
The Courier Systems™ is a fiber optic transmission systems designed for unique applications requiring pick up and delivery of video transmission along with associated Ethernet, P/T/Z data and audio...
Unit    Transceiver
Network Connection    RJ45 Connector
UTP Connection    RJ11
Power    24VAC/VDC @ 1amp
Network Rate    10/100 Ethernet
frs322000s00.jpg
Nitek: frs322000s00

2 Channel Stand Alone Video Only Fiber Optic Receiver 1550nm

Niteks FRS322000S00 is a two channel video only Universal-Mode receiver, that requires a single fiber per channel. Niteks unique Universal-Mode optics allow the unit to be used...

Unit    Transceiver
Network Connection    RJ45 Connector
UTP Connection    RJ11
Power    24VAC/VDC @ 1amp
Network Rate    10/100 Ethernet
frs324104s00.jpg
Nitek: frs324104s00

Dual Channel Stand Alone Video & Fiber Optic Data Receiver

Nitek's FRS324104S00 is a two channel video and data, Universal-Mode™ receiver. The system requires a single fiber per channel. Both video and data are transmitted over the...

Unit    Transceiver
Network Connection    RJ45 Connector
UTP Connection    RJ11
Power    24VAC/VDC @ 1amp
Network Rate    10/100 Ethernet
mc722st-80.jpg
Nitek: mc722st-80

Single-Mode Dual Fiber Media Converter - Up To 80km

The Nitek Single-Mode Dual Fiber Media Converter MC722ST-80 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC...

Unit    Transceiver
IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1310R
vh3239.jpg
Nitek: vh3239

32 Port UTP Video Balun Transceiver Hub

The Nitek 32 Port Video Balun Hub VH3239 with built-in surge suppression. Systems operate with other Nitek UTP video equipment including, video balun hubs, standard video balun...

Unit    Transceiver
Size    1 RU x 9.5" (D)
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
pvr164.jpg
Nitek: pvr164

16 Port Video, Power And Data Distribution Unit

The Nitek 16 Port Video, Power and Data Receiver PVR164 is a head-end distribution system for video, power and data for control. The system provides these functions for 16...

Camera Port    RJ45 Connector
Data In    2 wire push-in terminals
Video Out    BNC Connector
Power    Screw Terminals for 16-24 AWG wire
Power Requirements    Class 2 Low Voltage
mc722mt-2.jpg
Nitek: mc722mt-2

10/100TX To 100FX Multi-Mode Dual Fiber Media Converter

The Nitek 10/100TX to 100FX Multi-Mode Dual Fiber Media Converter MC722MT-2 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to...

Unit    Transceiver
IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (2) SC Duplex Connectors
Wavelength    1310nm
mc721mg-1.jpg
Nitek: mc721mg-1

Gigabit 1000BaseTX To 1000BaseFX Multi-Mode Dual Fiber Media Converter - Up To 500 Meters, 850nm

The Nitek Gigabit Multi-Mode Dual Fiber Media Converter MC721MG-1 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC...

Unit    Transceiver
IEEE    802.3, 802.3u
Ethernet    1000BaseT (1) RJ45 Jack
Fiber    1000BaseFX (1) SC Duplex Connector
Wavelength    850T/850R
mc722st-20.jpg
Nitek: mc722st-20

10/100TX To 100FX Single-Mode Fiber Media Converter - Up To 20km

The Nitek Single-Mode Dual Fiber Media Converter MC722ST-20 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC...

Unit    Transceiver
IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1310R
mc722st-60.jpg
Nitek: mc722st-60

Single-Mode Dual Fiber Media Converter - Up To 60km

The Nitek Single-Mode Dual Fiber Media Converter MC722ST-60 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC...

Unit    Transceiver
IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1310R
mc722st-40.jpg
Nitek: mc722st-40

Single-Mode Dual Fiber Media Converter 40km

The Nitek Single-Mode Dual Fiber Media Converter MC722ST-40 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC...

Unit    Transceiver
IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1310R
mc722st-100.jpg
Nitek: mc722st-100

Single-Mode Dual Fiber Media Converter - Up To 100km

The Nitek Single-Mode Dual Fiber Media Converter MC722ST-100 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC...

Unit    Transceiver
IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1310R
el1500c.jpg
Nitek: el1500c

TCP/IP Transmission Over Coax W/POE - Up To 1,640 Feet (Transmitter & Receiver)

The Nitek IP & PoE Over Coax Extender EL1500C IP video over Coax network extender-PoE Inserter (EtherStretch) system includes both the transmitter and receiver units. The System...

Unit    Transceiver
Size    1.1"H x 1.6"W x 4.93"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
el1500cw.jpg
Nitek: el1500cw

IP & PoE Over Coax Extender W/Weatherproof Transmitter
The Nitek Outdoor Rated Ethernet & PoE Extender EL 1500CW IP video over Coax network extender-PoE Inserter (EtherStretch). The system includes a receiver, transmitter, and a NEMA4X...
Unit Size    1.1"H x 1.6"W x 4.93"D
Enclosure Size    2.25"H x 4.76"W x 7.125"D
Power Requirements    PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
el1500u.jpg
Nitek: el1500u

TCP/IP Transmission Over UTP W/POE - Up To 1,960 Feet (Transmitter & Receiver)

The Nitek Ethernet & PoE Extender EL1500U IP ethernet network extender-PoE Inserter (EtherStretch) can quickly turn any ordinary 4 pair category network cable into a high speed...

Unit    Transceiver
Size    1.1"H x 1.6"W x 3.6"D
el1500cw.jpg
Nitek: el1500uw

Outdoor Rated Ethernet & PoE Extender
The Nitek IP & PoE Network Extender w/Weatherproof Transmitter EL 1500UW IP video network extender-PoE Inserter (EtherStretch) system includes a receiver, transmitter and a NEMA4X...
Unit Size    1.1"H x 1.6"W x 4.93"D
Enclosure Size    2.25"H x 4.76"W x 7.125"D
Power Requirements    PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 Port
et1500c.jpg
Nitek: et1500c

IP & PoE Over Coax Extender - Transmitter Unit

The Nitek IP & PoE Over Coax Extender - Transmitter Unit ET1500 C is a transmitter that extends Ethernet and PoE for distances up to 500 meters (1,640 ft.) over coaxial cable....

Unit    Transceiver
Size    1.1"H x 1.6"W x 4.93"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
et1500uw.jpg
Nitek: et1500cw

IP & PoE Over Coax Extender - Weatherproof Transmitter
The Nitek IP & PoE Over Coax Extender Weatherproof Transmitter Unit ET 1500CW Outdoor Rated IP Cameras over Coaxial Cable network extender and PoE Injector is a transmitter that...
Size    1.1"H x 1.6"W x 4.93"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
LED Indicators    Link Status, Power, PoE Out, 10Mb or 100mb
et1500u.jpg
Nitek: et1500u

IP & PoE Network Extender - Transmitter

The Nitek IP & PoE Network Extender - Transmitter Unit ET1500U IP Cameras network extender and PoE Injector is a transmitter unit that extends Ethernet and PoE for distances up to...

Unit    Transmitter
Size    1.1"H x 1.6"W x 4.93"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 Port
et1500uw.jpg
Nitek: et1500uw

IP & PoE Network Extender - Weatherproof Transmitter
The Nitek IP & PoE Network Extender - Weatherproof Transmitter Unit ET1500UW is a transmitter that extends Ethernet and PoE for distances up to 600 meters (1,960 ft.) over standard...
Unit    Transmitter
Size    7.125"H x 4.77"W x 2.23"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 Port
ee328.jpg
Nitek: ee328

IP Network and PoE Repeater - up to 328 feet

The Nitek Ethernet & PoE Extender EE328 is a single unit IP Network and PoE Repeater that requires very little installation time and absolutely no set up or configuration....

Size    1.1"H x 1.6"W x 3.6"D
Ethernet    100BaseTX Full Duplex
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Connection Method    RJ45
Clamping Voltage    15 Volts
ee328w.jpg
Nitek: ee328w

Weatherproof Enclosure For The Network Repeater Unit
The Nitek Ethernet & PoE Extender Weatherproof enclosure EE328W is a single unit IP Network and PoE Repeater that requires very little installation time and absolutely no set up or...
Size    7.125"H x 4.77"W x 2.23"D
Ethernet    100BaseTX Full Duplex
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Connection Method    RJ45
Clamping Voltage    15 Volts
er8500c.jpg
Nitek: er8500c

8 Port IP Extender W/Gigabit PoE Switch

The Nitek 8 Port IP Extender w/Gigabit PoE Switch ER8500C IP video over Coax multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit that operates with...

Unit    Transceiver
Size    1 RU x 12.7"D
Power Requirements    IEC380 power connector - 100-240 VAC input
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [8] Coaxial BNC Connector
er8500c.jpg
Nitek: er8500u

8 Port IP Extender W/Gigabit PoE Switch Up To 600 Meters (1,960 Ft.)
The Nitek 8 Port IP Extender w/Gigabit PoE Switch ER 8500U is a IP video multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit that operates with from 1...
Unit    Transceiver
Size    1 RU x 12.7"D
Power Requirements    IEC380 power connector - 100-240 VAC input
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [8] RJ45 Ports
er16500c.jpg
Nitek: er16500c

16 Port IP Extender W/Gigabit PoE Switch Up To 500 Meters (1,640 Ft.)

The Nitek Ethernet over Coax 16 Port IP Extender w/Gigabit PoE Switch ER16500C IP video over Coax multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit...

Unit    Transceiver
Size    1 RU x 12.7"D
Power Requirements    IEC380 power connector - 100-240 VAC input
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [16] Coaxial BNC Connector
er8500c.jpg
Nitek: er16500u

16 Port IP Extender W/Gigabit PoE Switch Up To 600 Meters (1,960 Ft.)
The Nitek 16 Port IP Extender w/Gigabit PoE Switch ER 16500U IP video multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit that operates with from 1 to...
Unit    Transceiver
Size    1 RU x 12.7"D
Power Requirements    IEC380 power connector - 100-240 VAC input
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [16] RJ45 Ports
rk124.jpg
Nitek: rk124

Modular Card Cage

The Nitek Rack Mount System for VR124 Units RK124 is a rack mount panel that provides a convenient and cost-effective means to mount and power up to 5 VR124, VR148, or VR448...

Unit    Transceiver
Capacity    Holds 5 VR Series receiver units
Size    24 VAC @ 1.25amps (Wall transformer provided with unit)
Weight    6.5 lbs.
VR124, VR148 & VR448 Network Extenders    Sold separately
camptr1.jpg
Nitek: camptr1

Camera Surge Protector - Single Channel, Multi-Stage

The Nitek Camera Video Surge Protector CAMPTR1 CCTV camera surge protector is a single channel, in-line, coaxial multi-stage video surge protector for analog cameras or head-end...

Unit    Transceiver
Size    1.5"H x 1.3"W x 0.8"D
Power Requirements    None required
Connection Method    Female BNC connectors
Clamping Voltage    2.8V
ippwr1.jpg
Nitek: ippwr1

IP Camera And Power Surge Protector

The Nitek IP Camera and Power Surge Protector IPPWR1 is a single channel, in-line, IP camera and power surge protector for 10/100 network devices. The IPPWR1...

Unit    Surge Protector
Size    0.9" H x 2.5" W x 1.8" D
Power Requirements    None required
Network Connection Method    RJ45 jack connectors
Power Connection Method    Push-in terminals - rated to 8 amps
ipptr12.jpg
Nitek: ipptr12

IP Camera And Power Surge Protector

The Nitek IP Camera and Power Surge Protector IPPTR12 IP Network Multi-Port Surge Protection Unit is designed to provide 12 ports of multi-stage network surge protection to...

Unit    Transceiver
Size    1RU
Connection Method    RJ45 connector (12 In - 12 Out)
Insertion Loss    <0.2dB
Impedance    50 and 75 ohms
utpptr4.jpg
Nitek: utpptr4

UTP Video, RS422 Surge Protector

The Nitek IP Camera and Power Surge Protector UTPPTR4 multi-function in-line surge protector for fixed and twisted pair transmissions.

The UTPPTR4...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Punchdown connectors
Clamping Voltage    15 Volts
Impedance    110 ohms
ip1054.jpg
Nitek: ip1054

Single Port PoE Plus Power Inserter-Injector

The Nitek Single Port PoE Plus Power Inserter-Injector IP1054 is a PoE Plus Inserter, single port power over Ethernet inserter, another addition to the industrial networking...

Unit    Transceiver
Power Requirements    100 240VAC
Data in Connection    [1] 10/100/1000 RJ45 port
Data & Power Out Connection    [1] 10/100/1000 RJ45 port
LED Indicators    Power
ip1648.jpg
Nitek: ip1648

16 Channel PoE Inserter, 15.4 Watts Per Channel

The Nitek 16 Channel PoE Inserter IP1648 provides mid-span power for PoE compliant devices. The IP1648 PoE injector is available as a sixteen port device in a...

Unit    Transceiver
Size    1 RU x 9.5" (D)
Power Requirements    IEC380 power inlet 115V 2amps
Network Connection Method    (32) RJ45 jack connectors
Temperature    -20C to 65C
ip1648m.jpg
Nitek: ip1648m

16 Channel PoE Power Supply, With Management Feature
The Nitek 16 Channel PoE Power Supply with Management Feature IP 1648M managed 16 Port PoE Inserter-Mid Span Injector, a power supply for PoE compliant cameras and edge devices with...
Unit    Transceiver
Size    1 RU x 9.5" (D)
Power Requirements    IEC380 power inlet 115V 2amps
Network Connection Method    (32) RJ45 jack connectors
Temperature    -20C to 65C
campvc24.jpg
Nitek: campvc24

Coax Camera, RS422, 24VAC Surge Protector - Single Channel, Multi-Stage

The Nitek Camera Video, Data and Power Surge Protector CAMPVC24 is a single channel, multi-function surge protector for in-line coaxial video, RS422 twisted pair and the 24 VAC...

Unit    Transceiver
Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - BNC connectors; Power - Screw terminals; Control - Screw terminals
Clamping Voltage    Video - 2.8V; Power - 33Vrms; Control - 4.7V
campdd24.jpg
Nitek: campdd24

Video, Two Data Pairs & Power Surge Protector

The Nitek Video, Two Data Pairs & Power Surge Protector CAMPDD24 is a multi-function surge protector for in-line coaxial video, two twisted pairs of data and the 12 or 24 VAC...

Unit    Transceiver
Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - BNC connectors; Power - Screw terminals; Control - Screw terminals; Data - Screw
Clamping Voltage    Video - 2.8V; Power - 33Vrms; Control - 4.7V
camtrv24.jpg
Nitek: camtrv24

Camera Video, Data And Power Surge Protector

The Nitek Camera Video, Data and Power Surge Protector CAMTRV24 is a single channel video balun transceiver used for UTP video transmission combined with a multi-function surge...

Unit    Transceiver
Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - BNC & Screw Terminals, Power - Screw terminals, Control - Screw terminals
Clamping Voltage    Video - 2.8V, Power - 33Vrms, Control - 4.7V
dvrptr16.jpg
Nitek: dvrptr16

16 Video, 2 Data Port Surge Protection

The Nitek 16 Video, 2 Data Port Surge Protection DVRPTR16 is designed to provide multi-stage surge protection to the 16 video channels and the 2 or 4 wire data for P/T/Z systems....

Size    1RU
Connection Method    Standard female BNC video connectors, Standard data screw terminals
Clamping Voltage    2.8v
Insertion Loss    <0.2dB
Impedance    50 and 75 ohms
cx254.jpg
Nitek: cx254

Modular Card Cage W/ Built In Power Supply

The Nitek Modular Card Cage w/ built in power supply CX254 is a modular crossover interface card cage with integrated power supply for the UTPLinks video, data & power over...

Size    1.72" (H) x 19.0" (W) x 15.50" (D) (with mounting ears)
Power Requirements    115/230 VAC, IEC with molded power cord (included)
Twisted Pair Connection (vertical runs)    5 RJ45 connectors providing balanced low voltage current loop
Temperature Range    0 degrees C to 55 degrees C
Humidity Range    0 to 98%, non-condensing
ps115.jpg
Nitek: ps115

Power Supply 28VAC, 10 AMP, 1 RU High
The Nitek Power Supply - 28VAC, 10 AMP, 1 RU High PS 115 provides 10 Amps of current for fixed cameras and P/T/Z. The PS-115 power is provided to the CX452...
Size    1.75"H x 19.0"W x 8.6"D
Power Requirements (Input)    120 VAC
Power Output    28 VAC
Output Current    10 Amp
Enclosure Type    Standard 19" Rack 1 RU in Height
mng6448.jpg
Nitek: mng6448

Mesh Network Wireless Radio

The Niket Mesh Network Wireless Radio MNG 6448 is a high performance wireless mesh node that provides reliable and dependable network connectivity wirelessly in a mesh backbone...

Size    10.25"H x 9.85"W x 2.95"D
Power Requirements    802.3af PoE (15.4 watts of DC power)
CPU Memory    1XP 422 266MHz / 8Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    Balanced low voltage current loop
wb5326.jpg
Nitek: wb5326

Wireless Ethernet Bridge

The Niket Wireless Ethernet Bridge WB5326 provides a low cost means of connecting network communications between two locations. In large scale installation wireless bridges are...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
ps48.jpg
Nitek: ps48

Power Supply 48VDC
The Nitek PoE Inserter PS48 is a 48VDC power supply for IPT148 and EE328.


Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
fts324104s00.jpg
Nitek: fts324104s00

Dual Channel Stand Alone Video & Data Transmitter

Nitek's FTS324104S00 is a two channel video and data, Universal-Mode™ transmitter. The system requires a single fiber per channel. Both video and data are transmitted over...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
fts312104s00.jpg
Nitek: fts312104s00

Single Channel Stand Alone Video & Data Transmitter

Nitek's FTS312104S00 is a single fiber channel Universal-Mode™ video and data transmitter in which both video and data are transmitted over the same fiber. Nitek's unique...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
fts344000r00.jpg
Nitek: fts344000r00

Four Channel Rack Mount Video Only Transmitter

Nitek's FTS344000R00 is a four channel video only Universal-Mode™ transmitter. The system requires a single fiber per channel. Nitek's unique Universal-Mode™ optics...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
fts324104r00.jpg
Nitek: fts324104r00

Dual Channel Rack Mount Video & Data Transmitte

Nitek's FTS324104R00 is a two channel video and data, Universal-Mode™ transmitter. The system requires a single fiber per channel. Both video and data are transmitted over...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
fts344000s00.jpg
Nitek: fts344000s00

Four Channel Stand Alone Video Only Transmitter

Nitek's FTS344000S00 is a four channel video only Universal-Mode™ transmitter. The system requires a single fiber per channel. Nitek's unique Universal-Mode™ optics...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
mc712st-40.jpg
Nitek: mc712st-40

10/100TX to 100FX Single-Mode Fiber Media Converter

The Nitek MC712ST-40 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
mc713st-40.jpg
Nitek: mc713st-40

10/100TX to 100FX Single-Mode Fiber Media Converter

The Nitek  MC713ST-40 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
mc712st-20.jpg
Nitek: mc712st-20

10/100TX to 100FX Single-Mode Fiber Media Converter

The Nitek  MC712ST-20 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
mc713st-20.jpg
Nitek: mc713st-20

10/100TX to 100FX Single-Mode Fiber Media Converter

The Nitek  MC713ST-20 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
mc712st-60.jpg
Nitek: mc712st-60

10/100TX to 100FX Single-Mode Fiber Media Converter

The Nitek  MC712ST-60 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
fts311000s00.jpg
Nitek: fts311000s00

Single Channel Stand Alone Video Only Transmitter

Nitek's FTS311000S00 is a single fiber per channel Universal-Mode™ video transmitter. Nitek's unique Universal-Mode™ optics allow the same unit to be used with...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
mc713st-60.jpg
Nitek: mc713st-60

10/100TX to 100FX Single-Mode Fiber Media Converter

The Nitek MC713ST-60 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
ma8-24.jpg
Nitek: ma8-24

Omni-Directional Antenna, 8dBi, 2.4 GHz

The Nitek MA8-24 is a Profession Grade Omni-Directional antenna that can be used for Commercial installations. The antenna features high gain and superior VSWR. The unit is...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
frs1000.jpg
Nitek: frs1000

Fiber equipment sub rack and 100 watt linear power supply

The FRS1000 fiber equipment sub rack can be configured to support any combination of Nitek fiber transmitters or receivers from any one of the four series available. A wide...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
ap540.jpg
Nitek: ap540

Mesh Accessory Pack

The Nitek AP540 outdoor accessory kit includes a radio pigtail cable assembly which is engineered for peak performance up to 6GHz. A surge protector (lightning arrestor) provide...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
frs2020.jpg
Nitek: frs2020

19" 2 Unit Rack Mount Chassis with Dual Power Supply System

Nitek's FRS2020 Rack Mount Chassis provides a convenient means of mounting individual single channel 2000 Series Fiber Modules. The FRS2020 fits a standard 19"...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
fss20111s.jpg
Nitek: fss20111s

Single Channel Fiber Optic CCTV System

Nitek's FSS20111S is a single fiber channel Universal-Mode™ video and data system in which both video and data are transmitted over the same fiber. The...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
fss20811s.jpg
Nitek: fss20811s

Eight Channel Fiber Optic CCTV System

Nitek's FSS20811S is an eight fiber channel Universal-Mode™ video and data system in which both video and data are transmitted over the same fiber. The...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
fss21611s.jpg
Nitek: fss21611s

Sixteen Channel Fiber Optic CCTV System

Nitek's FSS21611S is a sixteen fiber channel Universal-Mode™ video and data system in which both video and data are transmitted over the same fiber. The FSS21611S...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
frs312104s00.jpg
Nitek: frs312104s00

Single Channel Stand Alone Video & Data Receiver

Nitek's FRS312104S00 is a single fiber channel Universal-Mode™ video and data receiver in which both video and data are received over the same fiber. Nitek's unique...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
frs311000s00.jpg
Nitek: frs311000s00

Single Channel Stand Alone Video Only Receiver

Nitek's FRS311000S00 is a single fiber per channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with single-mode...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
et4500c.jpg
Nitek: et4500c

IP Cameras Over Coax Extender

The ET4500C is another component of the NITEK cutting edge EtherStretch line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing cable...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
er8400c.jpg
Nitek: er8400c

Ethernet Over Coax (EOC) 8 Port Extender w/Gigabit PoE Switch

The Etherstretch™ ER8400C Ethernet over Coax multi-port network extender-Gigabit PoE Switch is a Wall Mount Receiver unit that operates with from 1 to 8 ET1500C Transmitter...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
el4500c.jpg
Nitek: el4500c

IP Cameras Over Coax Extender

The EL4500C is another component of the NITEK cutting edge EtherStretch line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing cable...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
frs344000s00.jpg
Nitek: frs344000s00

Four Channel Stand Alone Video Only Receiver

Nitek's FRS344000S00 is a four channel video only Universal-ModeT receiver. The system requires a single fiber per channel. Nitek's unique Universal-Mode™ optics allow the...

Size    13.25"H x 13.25"W x 3.25"D
Power Requirements    802.3af PoE 48Vdc@0.5A/100~240Vac, 50/60Hz
CPU Memory    8Mb flash 32Mb SDRAM
LAN    [1] 10/100BaseT RJ-45 with auto MDIX
Output    100mW
mc712sg-10.jpg
Nitek: mc712sg-10

10/100TX to 100FX Single-Mode Fiber Media Converter - up to 10km over one fiber

The Nitek MC712SG-10 (10KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation....

IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1550R
Typical Distance    10km
mc713sg-10.jpg
Nitek: mc713sg-10

10/100TX to 100FX Single-Mode Fiber Media Converter - up to 10km over one fiber

The Nitek MC713SG-10 (10KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation....

IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1550T/1310R
Typical Distance    10km
mc712sg-20.jpg
Nitek: mc712sg-20

10/100TX to 100FX Single-Mode Fiber Media Converter - up to 20km over one fiber

The Nitek MC712SG-20 (20KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation....

IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1550R
Typical Distance    20km
mc713sg-20.jpg
Nitek: mc713sg-20

10/100TX to 100FX Single-Mode Fiber Media Converter - up to 20km over one fiber

The Nitek MC713SG-20 (20KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation....

IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1550T/1310R
Typical Distance    20km
mc712sg-40.jpg
Nitek: mc712sg-40

10/100TX to 100FX Single-Mode Fiber Media Converter - up to 40km over one fiber

The Nitek MC712SG-40 (40KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation....

IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1550R
Typical Distance    40km
mc713sg-40.jpg
Nitek: mc713sg-40

10/100TX to 100FX Single-Mode Fiber Media Converter - up to 40km over one fiber

The Nitek MC713SG-40 (40KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation....

IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1550T/1310R
Typical Distance    40km
mc722sg-10.jpg
Nitek: mc722sg-10

Gigabit 1000BaseTX to 1000BaseFX Single-Mode Dual Fiber Fiber Media Converter - up to 10KM, 1310nm

The Nitek MC722SG-10 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emission standards. Each converter features...

IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1310R
Typical Distance    10km
mc722sg-20.jpg
Nitek: mc722sg-20

Gigabit 1000BaseTX to 1000BaseFX Single-Mode Dual Fiber Fiber Media Converter - up to 20KM, 1310nm

The Nitek MC722SG-20 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emission standards. Each converter features...

IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1310R
Typical Distance    20km
mc722sg-40.jpg
Nitek: mc722sg-40

Gigabit 1000BaseTX to 1000BaseFX Single-Mode Dual Fiber Fiber Media Converter - up to 40KM, 1310nm

The Nitek MC722SG-40 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emission standards. Each converter features...

IEEE    802.3, 802.3u
Ethernet    10/100BaseT (1) RJ45 Jack
Fiber    100BaseFX (1) SC Duplex Connector
Wavelength    1310T/1310R
Typical Distance    40km
el1500uws.jpg
Nitek: el1500uws

Etherstretch™ IP Cameras Over UTP Extender w/Weatherproof Transmitter & Surge Suppressor
The Nitek Etherstretch™ EL1500UWS Outdoor IP cameras network extender-PoE Inserter with Surge Suppression is another of the IP Video Transmission Solutions from NITEK. The...
Receiver Unit Size    1.1"H x 1.6"W x 5.1"D
Enclosure Size    2.165"H x 5.74"W x 9.92"D
Power Requirements    PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 Port
el1551u.jpg
Nitek: el1551u

IP Video 2 Wire Network Extender

The Nitek EL1551U is a transmitter-receiver system which extends 100Mbps of Ethernet communication over a single pair of communication wires up to 1,500 ft (460 meters). The...

Size    1.1"H x 1.6"W x 4.6"D (including tabs)
Power Requirements    PoE (IEEE 802.3af or at) or PS48 Power Supply
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 port
LED Indicators    Link Status, Power, PoE Out, 10Mb or 100mb
el1551uw.jpg
Nitek: el1551uw

Etherstretch™ IP Cameras Over 2 Wire UTP Extender w/Weatherproof Transmitter
The Nitek EL1551UW IP video network extender system is another of the Etherstretch™ IP Video Transmission Solutions from NITEK. The System includes a receiver, transmitter and...
Unit Size    1.1"H x 1.6"W x 4.93"D
Enclosure Size    2.25"H x 4.76"W x 7.125"D
Power Requirements    PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
er1651u.jpg
Nitek: er1651u

IP Video 2 Wire Network Extender: 16 Port Receiver Unit

The Nitek ER1651U is another component of the NITEK cutting edge Etherstretch™ line. The ER1651U Receiver cambined with an ET1551U Transmitter (sold...

Network Output Port    (1) RJ45 Connector, 1 Gigabit
Link Port    16 Twisted Pair Wires
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 Full Duplex
LED Connectivity Indicators    Link Status, PoE Out, 10Mb or 1000Mb
Power Requirements    IEC380 Connector -115-240VAC/50-60Hz/150Watt Max
et1500cws.jpg
Nitek: et1500cws

Etherstretch™ Ethernet Over Coax Extender Weatherproof Transmitter Unit & Surge Suppressor
The Nitek Etherstretch™ ET1500CWS Outdoor Ethernet over Coax network extender-PoE Inserter with Surge Suppression is another of the IP Video Transmission Solutions from NITEK....
Receiver Unit Size    1.1"H x 1.6"W x 5.1"D
Enclosure Size    2.165"H x 5.74"W x 9.92"D
Power Requirements    PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
et1500uws.jpg
Nitek: et1500uws

Etherstretch™ IP Cameras Over UTP Extender Weatherproof Transmitter & Surge Suppressor
The Nitek Etherstretch™ ET1500UWS Outdoor IP camera network extender-PoE Inserter with Surge Suppression is another of the IP Video Transmission Solutions from NITEK. The...
Receiver Unit Size    1.1"H x 1.6"W x 5.1"D
Enclosure Size    2.165"H x 5.74"W x 9.92"D
Power Requirements    PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 Port
et1551u.jpg
Nitek: et1551u

IP Video 2 Wire Network Extender: Transmitter Unit

The Nitek ET1551U transmitter unit is another component of the NITEK cutting edge EtherStretch™ line. The ET1551U solution allows for the utilization of...

Size    1.1"H x 1.6"W x 4.6"D (including tabs)
Power Requirements    PoE (IEEE 802.3af or at) or PS48 Power Supply
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 port
LED Indicators    Link Status, Power, PoE Out, 10Mb or 100mb
et1551uw.jpg
Nitek: et1551uw

Etherstretch™ Outdoor IP Video 2 Wire Network Extender - Weatherproof Transmitter Unit
The Nitek ET1551UW Outdoor IP Video Network Extender, Transmitter Unit is another component of the NITEK cutting edge EtherStretch™ line. The System includes a transmitter and...
Size    1.1"H x 1.6"W x 4.6"D (including tabs)
Power Requirements    PoE (IEEE 802.3af or at) or PS48 Power Supply
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 port
LED Indicators    Link Status, Power, PoE Out, 10Mb or 100mb
ps4816w.jpg
Nitek: ps4816w

16 Channel 48VDC Power Supply

The Nitek PS4816W is a wall mounted 16 channel 48VDC Power Supply capable of providing up to 240 watts maximum divided over the 16 channels. Maximum output for any one channel is...

Input Voltage    Auto Switching 90 to 264 VAC
Output Voltage    48 VDC
Output Current    5.0 Amps
Output Power    240 Watts
Operating Temperature    -10 to 70C/ 14 to 158F
ippwr16.jpg
Nitek: ippwr16

IP Camera & PoE 16 Port Surge Protector

The Nitek IPPWR16 is a sixteen channel, rack mount, surge protector that provides data circuit protection for sixteen 10/100/1000 network devices. In addition to the network...

Size    0.9"2 RU
Power Requirements    None required
Network Connection Method    RJ45 jack connectors (16 In - 16 Out)
Peak Puls Power Dissipation    3,000 W/pair (10/100 micro second)
Clamping-Data/PoE Plus/Ethernet    58v (on all lines)
ipcoax1.jpg
Nitek: ipcoax1

IP Ethernet over Coax Surge Protector - Single Channel

The Nitek IPCOAX1 is a single channel IP Camera and PoE plus Surge Protector with an independent protection circuit for 12 or 24V power, for applications where heater units or...

Size    0.9" H x 2.5" W x 1.8" D
Power Requirements    None required
Network Connection Method    Standard female BNC connectors
Power Connection Method    Push-in terminals - rated at 5 amps
Clamping-Data/PoE Plus/Ethernet    58Vp-p
ipcoax16.jpg
Nitek: ipcoax16

IP over Coax 16 Channel Surge Protector

The Nitek IPCOAX16 is a sixteen channel IP Camera and PoE plus Surge Protector that provides excellent protection for ethernet devices and equipment. The IPCOAX16...

Size    2 RU
Power Requirements    None required
Network Connection Method    Standard female BNC connectors
Peak Pulse Power Dissipation    3,000 W/pair (10/100 microsecond)
Clamping-Data/PoE Plus/Ethernet    58Vp-p
camutp24.jpg
Nitek: camutp24

Multi-Function Surge Protector- UTP Video/RS422/12-24V Power

The Nitek CAMUTP24 is a single channel, multi-function surge protector for unshielded twisted pair (UTP) video, RS422 twisted pair and the 24 VAC camera supply. The...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs311000r00.jpg
Nitek: frs311000r00

Single Channel Rack Mount Video Only Receiver

Nitek's FRS311000R00 is a single fiber channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs312104r00.jpg
Nitek: frs312104r00

Single Channel Rack Mount Video & Data Receiver

Niteks FRS312104R00 is a single fiber per channel Universal-Mode™ video and data receiver. Niteks unique Universal-Mode™ optics allow the same unit to be used with...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs322000r00.jpg
Nitek: frs322000r00

Dual Channel Rack Mount Video Only Receiver

Nitek's FRS322000R00 is a two channel video only Universal-Mode™ receiver. The system requires a single fiber per channel. Nitek's unique Universal-Mode™ optics allow...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs324104r00.jpg
Nitek: frs324104r00

Dual Channel Rack Mount Video & Data Receiver

Nitek's FRS324104R00 is a two channel video and data, Universal-Mode™ receiver. The system requires a single fiber per channel. Both video and data are transmitted over the...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs344000r00.jpg
Nitek: frs344000r00

Four Channel Rack Mount Video Only Receiver

Nitek's FRS344000R00 is a four channel video only Universal-ModeT receiver. The system requires a single fiber per channel. Nitek's unique Universal-Mode optics allow the unit to...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
fts541000s00.jpg
Nitek: fts541000s00

Four Channel Stand Alone Video Only Transmitter

Nitek's FTS541000S00 is a four channel Universal-Mode™ video transmitter. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
fts541100s00.jpg
Nitek: fts541100s00

Four Channel Stand Alone Video & Data Transmitter

Nitek's FTS541100S00 is a four channel Universal-Mode™ video transmitter. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
fts541110s00.jpg
Nitek: fts541110s00

Four Channel Stand Alone Video, Data & Ethernet Transmitter

Nitek's FTS541110S00 is a four channel Universal-Mode™ video transmitter. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs541000s00.jpg
Nitek: frs541000s00

Four Channel Stand Alone Video Only Receiver

Nitek's FRS541000S00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs541100s00.jpg
Nitek: frs541100s00

Four Channel Rack Mount Video & Data Receiver

Nitek's FRS541100S00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs541110s00.jpg
Nitek: frs541110s00

4 Channel Video, Data & Ethernet Receiver W/ Bi-directional RS422/485/232

Nitek's FRS541110S00 is a four channel Universal-Mode™ video receiver that allows the same unit to be used with 1 single-mode or multi-mode fiber optic cabling type.

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs541000r00.jpg
Nitek: frs541000r00

Four Channel Rack Mount Video Only Receiver

Nitek's FRS541000R00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs541100r00.jpg
Nitek: frs541100r00

Four Channel Rack Mount Video & Data Receiver

Nitek's FRS541100R00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs541110r00.jpg
Nitek: frs541110r00

Four Channel Rack Mount Video, Data & Ethernet Receiver

Nitek's FRS541110R00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
fts581000s00.jpg
Nitek: fts581000s00

Eight Channel Stand Alone Video Only Transmitter

Nitek's FRTS581000S00 is an eight channel Universal-Mode™ video transmitter, which allows the same unit to be used with 1 single-mode or multi-mode fiber optic cabling...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
fts581100s00.jpg
Nitek: fts581100s00

Eight Channel Stand Alone Video & Data Transmitter

Nitek's FTS581100S00 is an eight channel Universal-Mode™ video Transmitter. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
fts581110s00.jpg
Nitek: fts581110s00

Eight Channel Stand Alone Video, Data & Ethernet Transmitter

Nitek's FTS581110S00 is an eight channel Universal-Mode™ video transmitter. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs581000s00.jpg
Nitek: frs581000s00

Eight Channel Stand Alone Video Only Receiver

Nitek's FRS581000S00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs581100s00.jpg
Nitek: frs581100s00

Eight Channel Stand Alone Video & Data Receiver

Nitek's FRS581100S00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs581110s00.jpg
Nitek: frs581110s00

Eight Channel Stand Alone Video, Data & Ethernet Receiver

Nitek's FRS581110S00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs581000r00.jpg
Nitek: frs581000r00

Eight Channel Rack Mount Video Only Receiver

Nitek's FRS581000R00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs581100r00.jpg
Nitek: frs581100r00

Eight Channel Rack Mount Video & Data Receiver

Nitek's FRS581100R00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
frs581110r00.jpg
Nitek: frs581110r00

Eight Channel Rack Mount Video, Data & Ethernet Receiver

Nitek's FRS581110R00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
dl1142.jpg
Nitek: dl1142

RS422 Line Driver-Data Extender

The DL1142 RS422 Line Driver-Data Extender is designed for operation over category cabling and standard 24 AWG telephone pairs. This system allows you to use unshielded twisted...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
dl2105.jpg
Nitek: dl2105

RS232 line driver extends RS232 up to 12,000 feet.

The Nitek DL2105 is designed for operation over category cabling and standard 24 AWG telephone pairs. This system allows you to use unshielded twisted pair cable making it...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
rk115.jpg
Nitek: rk115

Rack Panel for use with VB37M's or VB39M's

The Nitek RK115 rack panel provides a convenient and cost-effective means to mount up to ten model VB37M or VB39M video balun transceivers. While the RK115 is...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
rk170.jpg
Nitek: rk170

Media converter sub rack

The Nitek RK170 provides mounting and power for the media converters. It holds up to 6 units and is 1 rack unit

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
rk439.jpg
Nitek: rk439

Rack Panel for VH439

The Nitek RK439 Rack panel for is used for multiple VH439's, this rack 19" 1 in height.


Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
as1000.jpg
Nitek: as1000

Line Level Audio Transmission System up to 2 miles (3,225 meters)

The Nitek AS1000 is an audio link system that provides a low cost method of sending line level audio over twisted pair, point-to-point wiring for distances of up to 2 miles. The...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB
wp1325.jpg
Nitek: wp1325

Outdoor Rated Weatherproof Enclosure

The Nitek WP1325 is an Outdoor Enclosure Kit for Nitek Ethernet Extender products. The Kit includes a NEMA 4X rated Weatherproof, Polycarbonate, high-impact ABS molded enclosure,...

Size    1.7"H x 4.3"W x 2.5"D
Power Requirements    None required
Connection Method    Video - Screw terminals Power - Screw terminals Control - Screw terminals
Clamping Voltage    Video - 2.8V Power - 33Vrms Control - 4.7V
Video Insertion Loss    <0.2dB






facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.